From: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Date: Fri, 2 Nov 2018 20:49:52 +0000 (+0100)
Subject: spl: fix debug prints for tiny printf
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=30c0740e79cd71d42e606e6c29e6746c7837be80;p=u-boot.git

spl: fix debug prints for tiny printf

Tiny printf does not support %.*s and %lX. Since tiny printf should
be very common in SPL, replace these by %32s (for printing image
name) and %lx.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---

diff --git a/common/spl/spl.c b/common/spl/spl.c
index 292e659c9a..12f9359c0a 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -185,9 +185,8 @@ static int spl_load_fit_image(struct spl_image_info *spl_image,
 	spl_image->os = IH_OS_U_BOOT;
 	spl_image->name = "U-Boot";
 
-	debug("spl: payload image: %.*s load addr: 0x%lx size: %d\n",
-	      (int)sizeof(spl_image->name), spl_image->name,
-		spl_image->load_addr, spl_image->size);
+	debug("spl: payload image: %32s load addr: 0x%lx size: %d\n",
+	      spl_image->name, spl_image->load_addr, spl_image->size);
 
 #ifdef CONFIG_SPL_FIT_SIGNATURE
 	images.verify = 1;
@@ -256,9 +255,8 @@ int spl_parse_image_header(struct spl_image_info *spl_image,
 		}
 		spl_image->os = image_get_os(header);
 		spl_image->name = image_get_name(header);
-		debug("spl: payload image: %.*s load addr: 0x%lx size: %d\n",
-			IH_NMLEN, spl_image->name,
-			spl_image->load_addr, spl_image->size);
+		debug("spl: payload image: %32s load addr: 0x%lx size: %d\n",
+		      spl_image->name, spl_image->load_addr, spl_image->size);
 #else
 		/* LEGACY image not supported */
 		debug("Legacy boot image support not enabled, proceeding to other boot methods\n");
@@ -314,7 +312,7 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 	image_entry_noargs_t image_entry =
 		(image_entry_noargs_t)spl_image->entry_point;
 
-	debug("image entry point: 0x%lX\n", spl_image->entry_point);
+	debug("image entry point: 0x%lx\n", spl_image->entry_point);
 	image_entry();
 }
 
@@ -554,7 +552,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 		debug("Unsupported OS image.. Jumping nevertheless..\n");
 	}
 #if CONFIG_VAL(SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
-	debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
+	debug("SPL malloc() used 0x%lx bytes (%ld KB)\n", gd->malloc_ptr,
 	      gd->malloc_ptr / 1024);
 #endif
 #ifdef CONFIG_BOOTSTAGE_STASH