From: Peng Fan Date: Sun, 3 May 2020 14:19:46 +0000 (+0800) Subject: thermal: Add thermal driver for i.MX8M X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=2cd7f47983a38397c32bdf4fefeb35cd13600edb;p=u-boot.git thermal: Add thermal driver for i.MX8M The driver is ported form Linux Kernel and support driver model. Users need to provide the tmu node and sensors nodes in DTB. Signed-off-by: Ye Li Signed-off-by: Peng Fan --- diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index bdf8dc6fef..97d4163e8e 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -26,6 +26,15 @@ config IMX_SCU_THERMAL boot is hold to the cool device to throttle CPUs when the passive trip is crossed +config IMX_TMU + bool "Thermal Management Unit driver for NXP i.MX8M" + depends on ARCH_IMX8M + help + Support for Temperature sensors on NXP i.MX8M. + It supports one critical trip point and one passive trip point. + The boot is hold to the cool device to throttle CPUs when the + passive trip is crossed + config TI_DRA7_THERMAL bool "Temperature sensor driver for TI dra7xx SOCs" help diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index ef2929d180..15fe847d9f 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_DM_THERMAL) += thermal-uclass.o obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_IMX_SCU_THERMAL) += imx_scu_thermal.o obj-$(CONFIG_TI_DRA7_THERMAL) += ti-bandgap.o +obj-$(CONFIG_IMX_TMU) += imx_tmu.o diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c new file mode 100644 index 0000000000..f496ce03b6 --- /dev/null +++ b/drivers/thermal/imx_tmu.c @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017~2020 NXP + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define SITES_MAX 16 + +#define TMR_DISABLE 0x0 +#define TMR_ME 0x80000000 +#define TMR_ALPF 0x0c000000 +#define TMTMIR_DEFAULT 0x00000002 +#define TIER_DISABLE 0x0 + +/* + * i.MX TMU Registers + */ +struct imx_tmu_site_regs { + u32 tritsr; /* Immediate Temperature Site Register */ + u32 tratsr; /* Average Temperature Site Register */ + u8 res0[0x8]; +}; + +struct imx_tmu_regs { + u32 tmr; /* Mode Register */ + u32 tsr; /* Status Register */ + u32 tmtmir; /* Temperature measurement interval Register */ + u8 res0[0x14]; + u32 tier; /* Interrupt Enable Register */ + u32 tidr; /* Interrupt Detect Register */ + u32 tiscr; /* Interrupt Site Capture Register */ + u32 ticscr; /* Interrupt Critical Site Capture Register */ + u8 res1[0x10]; + u32 tmhtcrh; /* High Temperature Capture Register */ + u32 tmhtcrl; /* Low Temperature Capture Register */ + u8 res2[0x8]; + u32 tmhtitr; /* High Temperature Immediate Threshold */ + u32 tmhtatr; /* High Temperature Average Threshold */ + u32 tmhtactr; /* High Temperature Average Crit Threshold */ + u8 res3[0x24]; + u32 ttcfgr; /* Temperature Configuration Register */ + u32 tscfgr; /* Sensor Configuration Register */ + u8 res4[0x78]; + struct imx_tmu_site_regs site[SITES_MAX]; + u8 res5[0x9f8]; + u32 ipbrr0; /* IP Block Revision Register 0 */ + u32 ipbrr1; /* IP Block Revision Register 1 */ + u8 res6[0x310]; + u32 ttr0cr; /* Temperature Range 0 Control Register */ + u32 ttr1cr; /* Temperature Range 1 Control Register */ + u32 ttr2cr; /* Temperature Range 2 Control Register */ + u32 ttr3cr; /* Temperature Range 3 Control Register */ +}; + +struct imx_tmu_plat { + int critical; + int alert; + int polling_delay; + int id; + bool zone_node; + struct imx_tmu_regs *regs; +}; + +static int read_temperature(struct udevice *dev, int *temp) +{ + struct imx_tmu_plat *pdata = dev_get_platdata(dev); + u32 val; + + do { + val = readl(&pdata->regs->site[pdata->id].tritsr); + } while (!(val & 0x80000000)); + + *temp = (val & 0xff) * 1000; + + return 0; +} + +int imx_tmu_get_temp(struct udevice *dev, int *temp) +{ + struct imx_tmu_plat *pdata = dev_get_platdata(dev); + int cpu_tmp = 0; + int ret; + + ret = read_temperature(dev, &cpu_tmp); + if (ret) + return ret; + + while (cpu_tmp >= pdata->alert) { + printf("CPU Temperature (%dC) has beyond alert (%dC), close to critical (%dC)", cpu_tmp, pdata->alert, pdata->critical); + puts(" waiting...\n"); + mdelay(pdata->polling_delay); + ret = read_temperature(dev, &cpu_tmp); + if (ret) + return ret; + } + + *temp = cpu_tmp / 1000; + + return 0; +} + +static const struct dm_thermal_ops imx_tmu_ops = { + .get_temp = imx_tmu_get_temp, +}; + +static int imx_tmu_calibration(struct udevice *dev) +{ + int i, val, len, ret; + u32 range[4]; + const fdt32_t *calibration; + struct imx_tmu_plat *pdata = dev_get_platdata(dev); + + debug("%s\n", __func__); + + ret = dev_read_u32_array(dev, "fsl,tmu-range", range, 4); + if (ret) { + printf("TMU: missing calibration range, ret = %d.\n", ret); + return ret; + } + + /* Init temperature range registers */ + writel(range[0], &pdata->regs->ttr0cr); + writel(range[1], &pdata->regs->ttr1cr); + writel(range[2], &pdata->regs->ttr2cr); + writel(range[3], &pdata->regs->ttr3cr); + + calibration = dev_read_prop(dev, "fsl,tmu-calibration", &len); + if (!calibration || len % 8) { + printf("TMU: invalid calibration data.\n"); + return -ENODEV; + } + + for (i = 0; i < len; i += 8, calibration += 2) { + val = fdt32_to_cpu(*calibration); + writel(val, &pdata->regs->ttcfgr); + val = fdt32_to_cpu(*(calibration + 1)); + writel(val, &pdata->regs->tscfgr); + } + + return 0; +} + +static void imx_tmu_init(struct imx_tmu_plat *pdata) +{ + debug("%s\n", __func__); + + /* Disable monitoring */ + writel(TMR_DISABLE, &pdata->regs->tmr); + + /* Disable interrupt, using polling instead */ + writel(TIER_DISABLE, &pdata->regs->tier); + + /* Set update_interval */ + writel(TMTMIR_DEFAULT, &pdata->regs->tmtmir); +} + +static int imx_tmu_enable_msite(struct udevice *dev) +{ + struct imx_tmu_plat *pdata = dev_get_platdata(dev); + u32 reg; + + debug("%s\n", __func__); + + if (!pdata->regs) + return -EIO; + + /* Clear the ME before setting MSITE and ALPF*/ + reg = readl(&pdata->regs->tmr); + reg &= ~TMR_ME; + writel(reg, &pdata->regs->tmr); + + reg |= 1 << (15 - pdata->id); + reg |= TMR_ALPF; + writel(reg, &pdata->regs->tmr); + + /* Enable ME */ + reg |= TMR_ME; + writel(reg, &pdata->regs->tmr); + + return 0; +} + +static int imx_tmu_bind(struct udevice *dev) +{ + struct imx_tmu_plat *pdata = dev_get_platdata(dev); + int ret; + ofnode node, offset; + const char *name; + const void *prop; + + debug("%s dev name %s\n", __func__, dev->name); + + prop = dev_read_prop(dev, "compatible", NULL); + if (!prop) + return 0; + + pdata->zone_node = 1; + + node = ofnode_path("/thermal-zones"); + ofnode_for_each_subnode(offset, node) { + /* Bind the subnode to this driver */ + name = ofnode_get_name(offset); + + ret = device_bind_with_driver_data(dev, dev->driver, name, + dev->driver_data, offset, + NULL); + if (ret) + printf("Error binding driver '%s': %d\n", + dev->driver->name, ret); + } + + return 0; +} + +static int imx_tmu_parse_fdt(struct udevice *dev) +{ + struct imx_tmu_plat *pdata = dev_get_platdata(dev), *p_parent_data; + struct ofnode_phandle_args args; + ofnode trips_np; + int ret; + + debug("%s dev name %s\n", __func__, dev->name); + + if (pdata->zone_node) { + pdata->regs = (struct imx_tmu_regs *)dev_read_addr_ptr(dev); + + if (!pdata->regs) + return -EINVAL; + return 0; + } + + p_parent_data = dev_get_platdata(dev->parent); + if (p_parent_data->zone_node) + pdata->regs = p_parent_data->regs; + + ret = dev_read_phandle_with_args(dev, "thermal-sensors", + "#thermal-sensor-cells", + 0, 0, &args); + if (ret) + return ret; + + if (!ofnode_equal(args.node, dev_ofnode(dev->parent))) + return -EFAULT; + + if (args.args_count >= 1) + pdata->id = args.args[0]; + else + pdata->id = 0; + + debug("args.args_count %d, id %d\n", args.args_count, pdata->id); + + pdata->polling_delay = dev_read_u32_default(dev, "polling-delay", 1000); + + trips_np = ofnode_path("/thermal-zones/cpu-thermal/trips"); + ofnode_for_each_subnode(trips_np, trips_np) { + const char *type; + + type = ofnode_get_property(trips_np, "type", NULL); + if (!type) + continue; + if (!strcmp(type, "critical")) + pdata->critical = ofnode_read_u32_default(trips_np, "temperature", 85); + else if (strcmp(type, "passive") == 0) + pdata->alert = ofnode_read_u32_default(trips_np, "temperature", 80); + else + continue; + } + + debug("id %d polling_delay %d, critical %d, alert %d\n", + pdata->id, pdata->polling_delay, pdata->critical, pdata->alert); + + return 0; +} + +static int imx_tmu_probe(struct udevice *dev) +{ + struct imx_tmu_plat *pdata = dev_get_platdata(dev); + int ret; + + ret = imx_tmu_parse_fdt(dev); + if (ret) { + printf("Error in parsing TMU FDT %d\n", ret); + return ret; + } + + if (pdata->zone_node) { + imx_tmu_init(pdata); + imx_tmu_calibration(dev); + } else { + imx_tmu_enable_msite(dev); + } + + return 0; +} + +static const struct udevice_id imx_tmu_ids[] = { + { .compatible = "fsl,imx8mq-tmu", }, + { } +}; + +U_BOOT_DRIVER(imx_tmu) = { + .name = "imx_tmu", + .id = UCLASS_THERMAL, + .ops = &imx_tmu_ops, + .of_match = imx_tmu_ids, + .bind = imx_tmu_bind, + .probe = imx_tmu_probe, + .platdata_auto_alloc_size = sizeof(struct imx_tmu_plat), + .flags = DM_FLAG_PRE_RELOC, +};