From: Fabio Estevam Date: Thu, 14 Feb 2019 13:35:46 +0000 (-0200) Subject: mx6ul_14x14_evk: Simplify the PMIC register writes X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=250cf75424f7e2b04bde90ef9d99aae4a9e34f1f;p=u-boot.git mx6ul_14x14_evk: Simplify the PMIC register writes There is no need to store the values written to the PMIC inside the 'reg' variable. Make it simpler by writing the values directly. Signed-off-by: Fabio Estevam Reviewed-by: Peng Fan --- diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 595ad76bbe..636c008993 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -86,16 +86,13 @@ int power_init_board(void) pmic_reg_write(dev, PFUZE3000_LDOGCTL, reg); /* SW1B step ramp up time from 2us to 4us/25mV */ - reg = 0x40; - pmic_reg_write(dev, PFUZE3000_SW1BCONF, reg); + pmic_reg_write(dev, PFUZE3000_SW1BCONF, 0x40); /* SW1B mode to APS/PFM */ - reg = 0xc; - pmic_reg_write(dev, PFUZE3000_SW1BMODE, reg); + pmic_reg_write(dev, PFUZE3000_SW1BMODE, 0xc); /* SW1B standby voltage set to 0.975V */ - reg = 0xb; - pmic_reg_write(dev, PFUZE3000_SW1BSTBY, reg); + pmic_reg_write(dev, PFUZE3000_SW1BSTBY, 0xb); return 0; }