From: Marek Vasut <marex@denx.de>
Date: Mon, 4 Mar 2024 16:16:05 +0000 (+0100)
Subject: mtd: spi-nor: Clear Winbond SR3 WPS bit on boot
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=215f1d5794c6174ec0413eb6ff7f322ed284cc5b;p=u-boot.git

mtd: spi-nor: Clear Winbond SR3 WPS bit on boot

Some Winbond SPI NORs have special SR3 register which is
used among other things to control whether non-standard
"Individual Block/Sector Write Protection" (WPS bit)
locking scheme is activated. This non-standard locking
scheme is not supported by either U-Boot or Linux SPI
NOR stack so make sure it is disabled, otherwise the
SPI NOR may appear locked for no obvious reason.

This SR3 WPS appears e.g. on W25Q16FW which has the same ID as
W25Q16DW, but the W25Q16DW does not implement the SR3 WPS bit.

Signed-off-by: Marek Vasut <marex@denx.de>
---

diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 032e429d3f..24c6c31c04 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -595,6 +595,24 @@ static int read_cr(struct spi_nor *nor)
 }
 #endif
 
+/**
+ * read_sr3() - Read status register 3 unique to newer Winbond flashes
+ * @nor:	pointer to a 'struct spi_nor'
+ */
+static int read_sr3(struct spi_nor *nor)
+{
+	int ret;
+	u8 val;
+
+	ret = nor->read_reg(nor, SPINOR_OP_RDSR3, &val, 1);
+	if (ret < 0) {
+		dev_dbg(nor->dev, "error %d reading SR3\n", ret);
+		return ret;
+	}
+
+	return val;
+}
+
 /*
  * Write status register 1 byte
  * Returns negative if error occurred.
@@ -605,6 +623,17 @@ static int write_sr(struct spi_nor *nor, u8 val)
 	return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1);
 }
 
+/**
+ * write_sr3() - Write status register 3 unique to newer Winbond flashes
+ * @nor:	pointer to a 'struct spi_nor'
+ * @val:	value to be written into SR3
+ */
+static int write_sr3(struct spi_nor *nor, u8 val)
+{
+	nor->cmd_buf[0] = val;
+	return nor->write_reg(nor, SPINOR_OP_WRSR3, nor->cmd_buf, 1);
+}
+
 /*
  * Set write enable latch with Write Enable command.
  * Returns negative if error occurred.
@@ -4225,6 +4254,24 @@ static int spi_nor_init(struct spi_nor *nor)
 		write_enable(nor);
 		write_sr(nor, 0);
 		spi_nor_wait_till_ready(nor);
+
+		/*
+		 * Some Winbond SPI NORs have special SR3 register which is
+		 * used among other things to control whether non-standard
+		 * "Individual Block/Sector Write Protection" (WPS bit)
+		 * locking scheme is activated. This non-standard locking
+		 * scheme is not supported by either U-Boot or Linux SPI
+		 * NOR stack so make sure it is disabled, otherwise the
+		 * SPI NOR may appear locked for no obvious reason.
+		 */
+		if (JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND) {
+			err = read_sr3(nor);
+			if (err > 0 && err & SR3_WPS) {
+				write_enable(nor);
+				write_sr3(nor, err & ~SR3_WPS);
+				write_disable(nor);
+			}
+		}
 	}
 
 	if (nor->quad_enable) {
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index d5f4faf0a6..047e83e846 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -48,6 +48,8 @@
 #define SPINOR_OP_WRSR		0x01	/* Write status register 1 byte */
 #define SPINOR_OP_RDSR2		0x3f	/* Read status register 2 */
 #define SPINOR_OP_WRSR2		0x3e	/* Write status register 2 */
+#define SPINOR_OP_RDSR3		0x15	/* Read status register 3 */
+#define SPINOR_OP_WRSR3		0x11	/* Write status register 3 */
 #define SPINOR_OP_READ		0x03	/* Read data bytes (low frequency) */
 #define SPINOR_OP_READ_FAST	0x0b	/* Read data bytes (high frequency) */
 #define SPINOR_OP_READ_1_1_2	0x3b	/* Read data bytes (Dual Output SPI) */
@@ -186,6 +188,9 @@
  */
 #define SNOR_FLASH_CNT_MAX	2
 
+/* Status Register 3 bits. */
+#define SR3_WPS			BIT(2)
+
 /* For Cypress flash. */
 #define SPINOR_OP_RD_ANY_REG			0x65	/* Read any register */
 #define SPINOR_OP_WR_ANY_REG			0x71	/* Write any register */