From: Jim Liu Date: Mon, 23 Oct 2023 07:02:23 +0000 (+0800) Subject: configs: npcm: Support more uart baud rate X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=1af3e71972a62a363c24eace8b4f121c8baef75d;p=u-boot.git configs: npcm: Support more uart baud rate Add uart baud rate table to arbel(npcm8xx) and poleg(npcm7xx) Signed-off-by: Jim Liu [trini: Rework slightly] Signed-off-by: Tom Rini --- diff --git a/include/configs/arbel.h b/include/configs/arbel.h index 891257bc93..576ee37ee4 100644 --- a/include/configs/arbel.h +++ b/include/configs/arbel.h @@ -7,11 +7,15 @@ #define __CONFIG_ARBEL_H #define CFG_SYS_SDRAM_BASE 0x0 -#define CFG_SYS_BOOTMAPSZ (30 << 20) +#define CFG_SYS_BOOTMAPSZ (128 << 20) #define CFG_SYS_BOOTM_LEN (20 << 20) #define CFG_SYS_INIT_RAM_ADDR CFG_SYS_SDRAM_BASE #define CFG_SYS_INIT_RAM_SIZE 0x8000 +#define CFG_SYS_BAUDRATE_TABLE \ + { 9600, 14400, 19200, 38400, 57600, 115200, 230400, 380400, 460800, 921600 } + + /* Default environemnt variables */ #define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80400000\0" \ "stdin=serial\0" \ diff --git a/include/configs/poleg.h b/include/configs/poleg.h index 1e96e838be..2a2d85c8ec 100644 --- a/include/configs/poleg.h +++ b/include/configs/poleg.h @@ -13,6 +13,8 @@ #define CFG_SYS_BOOTMAPSZ (0x30 << 20) #define CFG_SYS_SDRAM_BASE 0x0 +#define CFG_SYS_BAUDRATE_TABLE { 57600, 115200, 230400, 460800 } + /* Default environemnt variables */ #define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \ "stdin=serial\0" \