From: Aditya Prayoga Date: Tue, 4 Dec 2018 16:57:23 +0000 (+0800) Subject: arm: mvebu: helios4: Reduce U-Boot image size X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=16b6aefafdabe1c8733e876f02f54cdaaad5f409;p=u-boot.git arm: mvebu: helios4: Reduce U-Boot image size Remove unused I2C support in SPL and use simple_malloc functions to reduce SPL image size. Since Helios4 does not have any PCIe allocated on SerDes, remove PCI support. MTD layer on top of SPI flash is not needed, remove it also. Signed-off-by: Aditya Prayoga Reviewed-by: Stefan Roese Tested-By: Dennis Gilmore Reviewed-By: Dennis Gilmore Signed-off-by: Stefan Roese --- diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig index 69dd7741a8..53995fe157 100644 --- a/configs/helios4_defconfig +++ b/configs/helios4_defconfig @@ -8,6 +8,7 @@ CONFIG_TARGET_HELIOS4=y CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xd0012000 CONFIG_DEBUG_UART_CLOCK=250000000 @@ -20,12 +21,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x141 -CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y @@ -52,11 +51,9 @@ CONFIG_MMC_SDHCI_MV=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_WINBOND=y -CONFIG_SPI_FLASH_MTD=y CONFIG_PHY_GIGE=y CONFIG_MVNETA=y CONFIG_MII=y -CONFIG_PCI=y CONFIG_SCSI=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y diff --git a/include/configs/helios4.h b/include/configs/helios4.h index c71055f384..e665340f1e 100644 --- a/include/configs/helios4.h +++ b/include/configs/helios4.h @@ -54,12 +54,6 @@ #define CONFIG_PHY_MARVELL /* there is a marvell phy */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ -/* PCIe support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PCI_MVEBU -#define CONFIG_PCI_SCAN_SHOW -#endif - /* Keep device tree and initrd in lower memory so the kernel can access them */ #define RELOCATION_LIMITS_ENV_SETTINGS \ "fdt_high=0x10000000\0" \