From: Masahiro Yamada Date: Sat, 25 Jul 2015 17:46:26 +0000 (+0900) Subject: drivers: hierarchize drivers Kconfig menu X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=0b11dbf705ee294ac5a9fe1aeda7b7f5537a8d72;p=u-boot.git drivers: hierarchize drivers Kconfig menu The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada Reviewed-by: Simon Glass [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini --- diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index c82b5645cd..788f8b739b 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -1,3 +1,5 @@ +menu "Generic Driver Options" + config DM bool "Enable Driver Model" help @@ -102,3 +104,5 @@ config DEBUG_DEVRES debug resource management for a managed device. If you are unsure about this, Say N here. + +endmenu diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index bd26a2bcfa..1ea116be75 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -1 +1,5 @@ +menu "Hardware crypto devices" + source drivers/crypto/fsl/Kconfig + +endmenu diff --git a/drivers/demo/Kconfig b/drivers/demo/Kconfig index 7a8ce18555..98bb6333c1 100644 --- a/drivers/demo/Kconfig +++ b/drivers/demo/Kconfig @@ -1,3 +1,5 @@ +menu "Demo for driver model" + config DM_DEMO bool "Enable demo uclass support" depends on DM @@ -24,3 +26,5 @@ config DM_DEMO_SHAPE a shape when the 'demo hello' command is executed which targets this device. It can be used to help understand how driver model works. + +endmenu diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 0c43777cef..5934597c4e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1,3 +1,9 @@ +# +# GPIO infrastructure and drivers +# + +menu "GPIO Support" + config DM_GPIO bool "Enable Driver Model for GPIO drivers" depends on DM @@ -42,3 +48,5 @@ config VYBRID_GPIO default n help Say yes here to support Vybrid vf610 GPIOs. + +endmenu diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 9a62ddd9ca..c40bd5c1e0 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -1,3 +1,9 @@ +# +# I2C subsystem configuration +# + +menu "I2C support" + config DM_I2C bool "Enable Driver Model for I2C drivers" depends on DM @@ -99,3 +105,5 @@ config SYS_I2C_UNIPHIER_F This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs. source "drivers/i2c/muxes/Kconfig" + +endmenu diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index de5feea8dd..b21bc94748 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -1,3 +1,5 @@ +menu "LED Support" + config LED bool "Enable LED support" depends on DM @@ -24,3 +26,5 @@ config LED_GPIO GPIOs may be on the SoC or some other device which provides GPIOs. The GPIO driver must used driver model. LEDs are configured using the device tree. + +endmenu diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 3b7f76ab78..f29a169774 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -1,3 +1,9 @@ +# +# Multifunction miscellaneous devices +# + +menu "Multifunction device drivers" + config CMD_CROS_EC bool "Enable crosec command" depends on CROS_EC @@ -82,3 +88,5 @@ config RESET Each driver can provide a reset method which will be called to effect a reset. The uclass will try all available drivers when reset_walk() is called. + +endmenu diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index bd63621e37..b5d9048ad6 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1,3 +1,9 @@ +# +# RTC drivers configuration +# + +menu "Real Time Clock" + config DM_RTC bool "Enable Driver Model for RTC drivers" depends on DM @@ -6,3 +12,5 @@ config DM_RTC then provides the rtc_get()/rtc_set() interface, delegating to drivers to perform the actual functions. See rtc.h for a description of the API. + +endmenu diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index a880eacfaf..4f6a3b87a1 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1,3 +1,9 @@ +# +# Serial device configuration +# + +menu "Serial drivers" + config REQUIRE_SERIAL_CONSOLE bool "Require a serial port for console" # Running without a serial console is not supported by the @@ -139,3 +145,5 @@ config X86_SERIAL enabled in the device tree with the correct input clock frequency provided (default 1843200). Enable this to obtain serial console output. + +endmenu diff --git a/drivers/sound/Kconfig b/drivers/sound/Kconfig index 3b96e84480..5de86c05c6 100644 --- a/drivers/sound/Kconfig +++ b/drivers/sound/Kconfig @@ -1,3 +1,5 @@ +menu "Sound support" + config SOUND bool "Enable sound support" help @@ -53,3 +55,5 @@ config SOUND_WM8994 Enable the wm8994 audio codec. This is connected via I2S for audio data and I2C for codec control. At present it only works with the Samsung I2S driver. + +endmenu diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3244cd7edd..5cb36851e7 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1,3 +1,9 @@ +# +# Video configuration +# + +menu "Graphics support" + config VIDEO_VESA bool "Enable VESA video driver support" default n @@ -242,3 +248,5 @@ config VIDEO_TEGRA124 have an eDP display connected. source "drivers/video/bridge/Kconfig" + +endmenu