From: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Date: Mon, 14 Aug 2023 17:39:43 +0000 (+0300)
Subject: arm: qemu: Enable usb keyboard as an input device
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=05e2fa79310ab30dd3e3fe522333aef3cfb1c421;p=u-boot.git

arm: qemu: Enable usb keyboard as an input device

Commit 02be57caf730 ("riscv: qemu: Enable usb keyboard as an input
device") adds PCI xHCI support to QEMU RISC-V virtual machines and
enables using a USB keyboard as one of the input devices. Similarly,
enable those for ARM virtual machines as well.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
---

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9332829874..71f820e443 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1042,6 +1042,11 @@ config ARCH_QEMU
 	imply SYS_WHITE_ON_BLACK
 	imply SYS_CONSOLE_IS_IN_ENV
 	imply PRE_CONSOLE_BUFFER
+	imply USB
+	imply USB_XHCI_HCD
+	imply USB_XHCI_PCI
+	imply USB_KEYBOARD
+	imply CMD_USB
 
 config ARCH_RMOBILE
 	bool "Renesas ARM SoCs"
diff --git a/board/emulation/qemu-arm/qemu-arm.c b/board/emulation/qemu-arm/qemu-arm.c
index dfea0d92a3..942f1fff57 100644
--- a/board/emulation/qemu-arm/qemu-arm.c
+++ b/board/emulation/qemu-arm/qemu-arm.c
@@ -11,6 +11,7 @@
 #include <fdtdec.h>
 #include <init.h>
 #include <log.h>
+#include <usb.h>
 #include <virtio_types.h>
 #include <virtio.h>
 
@@ -114,6 +115,10 @@ int board_late_init(void)
 	 */
 	virtio_init();
 
+	/* start usb so that usb keyboard can be used as input device */
+	if (CONFIG_IS_ENABLED(USB_KEYBOARD))
+		usb_init();
+
 	return 0;
 }
 
diff --git a/board/emulation/qemu-arm/qemu-arm.env b/board/emulation/qemu-arm/qemu-arm.env
index 86a99a2e87..fb4adef281 100644
--- a/board/emulation/qemu-arm/qemu-arm.env
+++ b/board/emulation/qemu-arm/qemu-arm.env
@@ -2,7 +2,7 @@
 
 /* environment for qemu-arm and qemu-arm64 */
 
-stdin=serial
+stdin=serial,usbkbd
 stdout=serial,vidconsole
 stderr=serial,vidconsole
 fdt_high=0xffffffff
diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig
index 2080f5ee9a..5fdf496a45 100644
--- a/configs/qemu_arm64_defconfig
+++ b/configs/qemu_arm64_defconfig
@@ -35,7 +35,6 @@ CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
 CONFIG_CMD_TPM=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_ENV_IS_IN_FLASH=y
@@ -68,7 +67,6 @@ CONFIG_SYSRESET=y
 CONFIG_SYSRESET_CMD_POWEROFF=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_TPM2_MMIO=y
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_SEMIHOSTING=y
diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig
index 7cb1e9f037..1347b86f34 100644
--- a/configs/qemu_arm_defconfig
+++ b/configs/qemu_arm_defconfig
@@ -36,7 +36,6 @@ CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
 CONFIG_CMD_TPM=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_ENV_IS_IN_FLASH=y
@@ -69,7 +68,6 @@ CONFIG_SYSRESET=y
 CONFIG_SYSRESET_CMD_POWEROFF=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_TPM2_MMIO=y
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_TPM=y
diff --git a/doc/board/emulation/qemu-arm.rst b/doc/board/emulation/qemu-arm.rst
index 1108fe5f81..8ec5349fc9 100644
--- a/doc/board/emulation/qemu-arm.rst
+++ b/doc/board/emulation/qemu-arm.rst
@@ -84,6 +84,10 @@ can be enabled with the following command line parameters:
 
     -device usb-ehci,id=ehci
 
+- To add a USB keyboard attached to an emulated xHCI controller, pass e.g.::
+
+    -device qemu-xhci,id=xhci -device usb-kbd,bus=xhci.0
+
 - To add an NVMe disk, pass e.g.::
 
     -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo