atmel_nand_ecc: update pmecc registers according to sama5d2 chip

1. add the pmecc register mapping for sama5d2.
2. add the pmecc error location register mapping for sama5d2.
3. add some new field that is different from old ip.
4. add sama5d2 pmecc ip version number.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>

diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index 79e399489eac9604c5e69814b6ff6013ca9a28cf..e13f38503fa9478d7ecaea12d9c715445005a954 100644 (file)
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -58,14 +58,23 @@ struct pmecc_regs {
 
        /* 0x40 + sector_num * (0x40), Redundancy Registers */
        struct {
+#ifdef CONFIG_SAMA5D2
+               u8 ecc[56];     /* PMECC Generated Redundancy Byte Per Sector */
+               u32 reserved1[2];
+#else
                u8 ecc[44];     /* PMECC Generated Redundancy Byte Per Sector */
                u32 reserved1[5];
+#endif
        } ecc_port[PMECC_MAX_SECTOR_NUM];
 
        /* 0x240 + sector_num * (0x40) Remainder Registers */
        struct {
+#ifdef CONFIG_SAMA5D2
+               u32 rem[16];
+#else
                u32 rem[12];
                u32 reserved2[4];
+#endif
        } rem_port[PMECC_MAX_SECTOR_NUM];
        u32 reserved3[16];      /* 0x440-0x47C Reserved */
 };
@@ -76,6 +85,7 @@ struct pmecc_regs {
 #define                PMECC_CFG_BCH_ERR8              (2 << 0)
 #define                PMECC_CFG_BCH_ERR12             (3 << 0)
 #define                PMECC_CFG_BCH_ERR24             (4 << 0)
+#define                PMECC_CFG_BCH_ERR32             (5 << 0)
 
 #define                PMECC_CFG_SECTOR512             (0 << 4)
 #define                PMECC_CFG_SECTOR1024            (1 << 4)
@@ -120,19 +130,31 @@ struct pmecc_errloc_regs {
        u32 elimr;      /* 0x0C Error Location Interrupt Mask Register */
        u32 elisr;      /* 0x20 Error Location Interrupt Status Register */
        u32 reserved0;  /* 0x24 Reserved */
+#ifdef CONFIG_SAMA5D2
+       u32 sigma[33];  /* 0x28-0xA8 Error Location Sigma Registers */
+       u32 el[32];     /* 0xAC-0x128 Error Location Registers */
+
+       /*
+        * 0x12C-0x1FC:
+        *   Reserved for SAMA5D2.
+        */
+       u32 reserved1[53];
+#else
        u32 sigma[25];  /* 0x28-0x88 Error Location Sigma Registers */
        u32 el[24];     /* 0x8C-0xE8 Error Location Registers */
        u32 reserved1[5];       /* 0xEC-0xFC Reserved */
+#endif
 
        /*
-        * 0x100-0x1F8:
-        *   Reserved for AT91SAM9X5, AT91SAM9N12.
-        *   HSMC registers for SAMA5D3, SAMA5D4.
+        * SAMA5 chip HSMC registers start here. But for 9X5 chip it is just
+        * reserved.
+        *
+        * Offset 0x00-0xF8:
         */
        u32 reserved2[63];
 
        /*
-        * 0x1FC:
+        * Offset 0xFC:
         *   PMECC version for AT91SAM9X5, AT91SAM9N12.
         *   HSMC version for SAMA5D3, SAMA5D4. Can refer as PMECC version.
         */
@@ -148,10 +170,16 @@ struct pmecc_errloc_regs {
 #define                PMERRLOC_DISABLE                (1 << 0)
 
 /* For Error Location Interrupt Status Register */
+#ifdef CONFIG_SAMA5D2
+#define                PMERRLOC_ERR_NUM_MASK           (0x3f << 8)
+#else
 #define                PMERRLOC_ERR_NUM_MASK           (0x1f << 8)
+#endif
+
 #define                PMERRLOC_CALC_DONE              (1 << 0)
 
 /* PMECC IP version */
+#define PMECC_VERSION_SAMA5D2                  0x210
 #define PMECC_VERSION_SAMA5D4                  0x113
 #define PMECC_VERSION_SAMA5D3                  0x112
 #define PMECC_VERSION_AT91SAM9N12              0x102