imx8qm/qxp: Set SPL TEXT base to OCRAM base

Modify the SPL TEXT base from OCRAM alias to OCRAM base 0x100000, so
we can use full OCRAM not limit to 96KB

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
index 57cf659b25e09d4d9c7a27226d221a4a0ebfa9ff..747f3ea9f306cc8d7fcfe47d469c455c95ba55d5 100644 (file)
--- a/configs/imx8qm_mek_defconfig
+++ b/configs/imx8qm_mek_defconfig
@@ -3,6 +3,7 @@ CONFIG_SPL_SYS_ICACHE_OFF=y
 CONFIG_SPL_SYS_DCACHE_OFF=y
 CONFIG_ARCH_IMX8=y
 CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_SPL_TEXT_BASE=0x100000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y

diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index ded6036be9eafb5046f5c2c360596fa7a6c09e11..2f41e1bac2ca5d3ddbc7ca221228f05945c092b9 100644 (file)
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -3,6 +3,7 @@ CONFIG_SPL_SYS_ICACHE_OFF=y
 CONFIG_SPL_SYS_DCACHE_OFF=y
 CONFIG_ARCH_IMX8=y
 CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_SPL_TEXT_BASE=0x100000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y

diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index 869035172e3a8baf4a817775101d851286a0081e..2b8f85ded110c97395e81bbf711e1b03bfe9f855 100644 (file)
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -10,7 +10,6 @@
 #include <asm/arch/imx-regs.h>
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_TEXT_BASE                           0x0
 #define CONFIG_SPL_MAX_SIZE                            (124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN                         (1024 * 1024)
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR