arm64: dts: rk3399-evb: Move u-boot properties into -u-boot.dtsi

Move U-Boot specific properties into rk3399-evb u-boot
specific dtsi file.

This would help to sync the devicetrees from Linux whenever
required instead of adding specific nodes.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/rk3399-evb-u-boot.dtsi b/arch/arm/dts/rk3399-evb-u-boot.dtsi
index f68a56fdd0bdb40b516bd430933e41526138e11a..e5659d79995d13c06b89e743b54459803bc4b0fb 100644 (file)
--- a/arch/arm/dts/rk3399-evb-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-evb-u-boot.dtsi
@@ -15,3 +15,11 @@
 &rng {
        status = "okay";
 };
+
+&i2c0 {
+       u-boot,dm-pre-reloc;
+};
+
+&rk808 {
+       u-boot,dm-pre-reloc;
+};

diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
index 4129e902a81822556c5f39b31641ca5986385620..c72719c0d30a0c2aa955e2911c79545b0b09f2b8 100644 (file)
--- a/arch/arm/dts/rk3399-evb.dts
+++ b/arch/arm/dts/rk3399-evb.dts
@@ -199,7 +199,6 @@
        clock-frequency = <400000>;
        i2c-scl-falling-time-ns = <50>;
        i2c-scl-rising-time-ns = <100>;
-       u-boot,dm-pre-reloc;
 
        rk808: pmic@1b {
                compatible = "rockchip,rk808";
@@ -211,7 +210,6 @@
                reg = <0x1b>;
                rockchip,system-power-controller;
                #clock-cells = <1>;
-               u-boot,dm-pre-reloc;
                status = "okay";
 
                vcc12-supply = <&vcc3v3_sys>;