IO board and Neu2 needs to mount on top of this IO board in order to
create complete Edgeble Neural Compute Module 2(Neu2) IO platform.
+config TARGET_RV1126_SONOFF_IHOST
+ bool "Sonoff iHost smart home hub"
+ help
+ Sonoff iHost is a smart home gateway based on Rockchip RV1126 SoC.
+ It features Wifi, Bluetooth and Zigbee radios that are used by many
+ smart home devices.
+
config SOC_SPECIFIC_OPTIONS # dummy
def_bool y
select HAS_CUSTOM_SYS_INIT_SP_ADDR
default 0x600000
source board/edgeble/neural-compute-module-2/Kconfig
+source board/itead/sonoff-ihost/Kconfig
endif
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_SYS_ARCH_TIMER=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="rv1126-sonoff-ihost"
+CONFIG_SYS_MONITOR_LEN=614400
+CONFIG_ROCKCHIP_RV1126=y
+CONFIG_TARGET_RV1126_SONOFF_IHOST=y
+CONFIG_DEBUG_UART_BASE=0xff570000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xe00800
+CONFIG_DEBUG_UART=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_SPL_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_DEFAULT_FDT_FILE="rv1126-sonoff-ihost.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_PAD_TO=0x7f8000
+CONFIG_SPL_NO_BSS_LIMIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPT=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_PWM_ROCKCHIP=y
+# CONFIG_RAM_ROCKCHIP_DEBUG is not set
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+# CONFIG_TPL_SYSRESET is not set
+CONFIG_DM_THERMAL=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y