ARM: dts: stm32: Use lower-case hex for address for stm32f7-u-boot.dtsi

Replace upper-case hex with lower-case hex for address.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

diff --git a/arch/arm/dts/stm32f7-u-boot.dtsi b/arch/arm/dts/stm32f7-u-boot.dtsi
index 46bd1102df5a05c17be98cb2bc4e1bbe17d39415..c1b2ac25c316fe8762bfaf2e329cdb66486d6303 100644 (file)
--- a/arch/arm/dts/stm32f7-u-boot.dtsi
+++ b/arch/arm/dts/stm32f7-u-boot.dtsi
@@ -7,7 +7,7 @@
 
                fmc: fmc@A0000000 {
                        compatible = "st,stm32-fmc";
-                       reg = <0xA0000000 0x1000>;
+                       reg = <0xa0000000 0x1000>;
                        clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>;
                        pinctrl-0 = <&fmc_pins>;
                        pinctrl-names = "default";
@@ -46,7 +46,7 @@
                        compatible = "st,stm32f469-qspi";
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
+                       reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
                        reg-names = "qspi", "qspi_mm";
                        interrupts = <92>;
                        spi-max-frequency = <108000000>;