]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
rockchip: pinctrl: Add rk3328 gmac pinctrl support
authorDavid Wu <david.wu@rock-chips.com>
Sat, 13 Jan 2018 06:02:07 +0000 (14:02 +0800)
committerPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Sun, 28 Jan 2018 16:12:37 +0000 (17:12 +0100)
Need to set gmac m1 pins iomux, gmac m0 tx pins, select bit2
and bit10 at com iomux register. After that, set rgmii m1 tx
pins to 12ma drive-strength, and clean others to 2ma.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
arch/arm/include/asm/arch-rockchip/grf_rk3328.h
drivers/pinctrl/rockchip/pinctrl_rk3328.c

index 0c37f2ad1843129e725f8b5f6781bb36b35939c6..2776cefbb2625fd1a04bfed52a8a0ed92ef699bd 100644 (file)
@@ -131,5 +131,4 @@ struct rk3328_sgrf_regs {
 };
 check_member(rk3328_sgrf_regs, hdcp_key_access_mask, 0x2a0);
 
-
 #endif /* __SOC_ROCKCHIP_RK3328_GRF_H__ */
index 3c2253fdaf57b4d4963731a87e82a0a33fcc239d..fa2356a7a1aa5264b0574fa8d6c8f4a550115f78 100644 (file)
@@ -31,6 +31,37 @@ enum {
        GPIO0A7_SEL_MASK        = 3 << GPIO0A7_SEL_SHIFT,
        GPIO0A7_EMMC_DATA0      = 2,
 
+       /* GPIO0B_IOMUX*/
+       GPIO0B0_SEL_SHIFT       = 0,
+       GPIO0B0_SEL_MASK        = 3 << GPIO0B0_SEL_SHIFT,
+       GPIO0B0_GAMC_CLKTXM0    = 1,
+
+       GPIO0B4_SEL_SHIFT       = 8,
+       GPIO0B4_SEL_MASK        = 3 << GPIO0B4_SEL_SHIFT,
+       GPIO0B4_GAMC_TXENM0     = 1,
+
+       /* GPIO0C_IOMUX*/
+       GPIO0C0_SEL_SHIFT       = 0,
+       GPIO0C0_SEL_MASK        = 3 << GPIO0C0_SEL_SHIFT,
+       GPIO0C0_GAMC_TXD1M0     = 1,
+
+       GPIO0C1_SEL_SHIFT       = 2,
+       GPIO0C1_SEL_MASK        = 3 << GPIO0C1_SEL_SHIFT,
+       GPIO0C1_GAMC_TXD0M0     = 1,
+
+       GPIO0C6_SEL_SHIFT       = 12,
+       GPIO0C6_SEL_MASK        = 3 << GPIO0C6_SEL_SHIFT,
+       GPIO0C6_GAMC_TXD2M0     = 1,
+
+       GPIO0C7_SEL_SHIFT       = 14,
+       GPIO0C7_SEL_MASK        = 3 << GPIO0C7_SEL_SHIFT,
+       GPIO0C7_GAMC_TXD3M0     = 1,
+
+       /* GPIO0D_IOMUX*/
+       GPIO0D0_SEL_SHIFT       = 0,
+       GPIO0D0_SEL_MASK        = 3 << GPIO0D0_SEL_SHIFT,
+       GPIO0D0_GMAC_CLKM0      = 1,
+
        GPIO0D6_SEL_SHIFT       = 12,
        GPIO0D6_SEL_MASK        = 3 << GPIO0D6_SEL_SHIFT,
        GPIO0D6_GPIO            = 0,
@@ -41,6 +72,69 @@ enum {
        GPIO1A0_SEL_MASK        = 0x3fff << GPIO1A0_SEL_SHIFT,
        GPIO1A0_CARD_DATA_CLK_CMD_DETN  = 0x1555,
 
+       /* GPIO1B_IOMUX */
+       GPIO1B0_SEL_SHIFT       = 0,
+       GPIO1B0_SEL_MASK        = 3 << GPIO1B0_SEL_SHIFT,
+       GPIO1B0_GMAC_TXD1M1     = 2,
+
+       GPIO1B1_SEL_SHIFT       = 2,
+       GPIO1B1_SEL_MASK        = 3 << GPIO1B1_SEL_SHIFT,
+       GPIO1B1_GMAC_TXD0M1     = 2,
+
+       GPIO1B2_SEL_SHIFT       = 4,
+       GPIO1B2_SEL_MASK        = 3 << GPIO1B2_SEL_SHIFT,
+       GPIO1B2_GMAC_RXD1M1     = 2,
+
+       GPIO1B3_SEL_SHIFT       = 6,
+       GPIO1B3_SEL_MASK        = 3 << GPIO1B3_SEL_SHIFT,
+       GPIO1B3_GMAC_RXD0M1     = 2,
+
+       GPIO1B4_SEL_SHIFT       = 8,
+       GPIO1B4_SEL_MASK        = 3 << GPIO1B4_SEL_SHIFT,
+       GPIO1B4_GMAC_TXCLKM1    = 2,
+
+       GPIO1B5_SEL_SHIFT       = 10,
+       GPIO1B5_SEL_MASK        = 3 << GPIO1B5_SEL_SHIFT,
+       GPIO1B5_GMAC_RXCLKM1    = 2,
+
+       GPIO1B6_SEL_SHIFT       = 12,
+       GPIO1B6_SEL_MASK        = 3 << GPIO1B6_SEL_SHIFT,
+       GPIO1B6_GMAC_RXD3M1     = 2,
+
+       GPIO1B7_SEL_SHIFT       = 14,
+       GPIO1B7_SEL_MASK        = 3 << GPIO1B7_SEL_SHIFT,
+       GPIO1B7_GMAC_RXD2M1     = 2,
+
+       /* GPIO1C_IOMUX */
+       GPIO1C0_SEL_SHIFT       = 0,
+       GPIO1C0_SEL_MASK        = 3 << GPIO1C0_SEL_SHIFT,
+       GPIO1C0_GMAC_TXD3M1     = 2,
+
+       GPIO1C1_SEL_SHIFT       = 2,
+       GPIO1C1_SEL_MASK        = 3 << GPIO1C1_SEL_SHIFT,
+       GPIO1C1_GMAC_TXD2M1     = 2,
+
+       GPIO1C3_SEL_SHIFT       = 6,
+       GPIO1C3_SEL_MASK        = 3 << GPIO1C3_SEL_SHIFT,
+       GPIO1C3_GMAC_MDIOM1     = 2,
+
+       GPIO1C5_SEL_SHIFT       = 10,
+       GPIO1C5_SEL_MASK        = 3 << GPIO1C5_SEL_SHIFT,
+       GPIO1C5_GMAC_CLKM1      = 2,
+
+       GPIO1C6_SEL_SHIFT       = 12,
+       GPIO1C6_SEL_MASK        = 3 << GPIO1C6_SEL_SHIFT,
+       GPIO1C6_GMAC_RXDVM1     = 2,
+
+       GPIO1C7_SEL_SHIFT       = 14,
+       GPIO1C7_SEL_MASK        = 3 << GPIO1C7_SEL_SHIFT,
+       GPIO1C7_GMAC_MDCM1      = 2,
+
+       /* GPIO1D_IOMUX */
+       GPIO1D1_SEL_SHIFT       = 2,
+       GPIO1D1_SEL_MASK        = 3 << GPIO1D1_SEL_SHIFT,
+       GPIO1D1_GMAC_TXENM1     = 2,
+
        /* GPIO2A_IOMUX */
        GPIO2A0_SEL_SHIFT       = 0,
        GPIO2A0_SEL_MASK        = 3 << GPIO2A0_SEL_SHIFT,
@@ -118,6 +212,11 @@ enum {
        IOMUX_SEL_UART2_M0      = 0,
        IOMUX_SEL_UART2_M1,
 
+       IOMUX_SEL_GMAC_SHIFT    = 2,
+       IOMUX_SEL_GMAC_MASK     = 1 << IOMUX_SEL_GMAC_SHIFT,
+       IOMUX_SEL_GMAC_M0       = 0,
+       IOMUX_SEL_GMAC_M1,
+
        IOMUX_SEL_SPI_SHIFT     = 4,
        IOMUX_SEL_SPI_MASK      = 3 << IOMUX_SEL_SPI_SHIFT,
        IOMUX_SEL_SPI_M0        = 0,
@@ -128,6 +227,55 @@ enum {
        IOMUX_SEL_SDMMC_MASK    = 1 << IOMUX_SEL_SDMMC_SHIFT,
        IOMUX_SEL_SDMMC_M0      = 0,
        IOMUX_SEL_SDMMC_M1,
+
+       IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT     = 10,
+       IOMUX_SEL_GMACM1_OPTIMIZATION_MASK      = 1 << IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT,
+       IOMUX_SEL_GMACM1_OPTIMIZATION_BEFORE    = 0,
+       IOMUX_SEL_GMACM1_OPTIMIZATION_AFTER,
+
+       /* GRF_GPIO1B_E */
+       GRF_GPIO1B0_E_SHIFT = 0,
+       GRF_GPIO1B0_E_MASK = 3 << GRF_GPIO1B0_E_SHIFT,
+       GRF_GPIO1B1_E_SHIFT = 2,
+       GRF_GPIO1B1_E_MASK = 3 << GRF_GPIO1B1_E_SHIFT,
+       GRF_GPIO1B2_E_SHIFT = 4,
+       GRF_GPIO1B2_E_MASK = 3 << GRF_GPIO1B2_E_SHIFT,
+       GRF_GPIO1B3_E_SHIFT = 6,
+       GRF_GPIO1B3_E_MASK = 3 << GRF_GPIO1B3_E_SHIFT,
+       GRF_GPIO1B4_E_SHIFT = 8,
+       GRF_GPIO1B4_E_MASK = 3 << GRF_GPIO1B4_E_SHIFT,
+       GRF_GPIO1B5_E_SHIFT = 10,
+       GRF_GPIO1B5_E_MASK = 3 << GRF_GPIO1B5_E_SHIFT,
+       GRF_GPIO1B6_E_SHIFT = 12,
+       GRF_GPIO1B6_E_MASK = 3 << GRF_GPIO1B6_E_SHIFT,
+       GRF_GPIO1B7_E_SHIFT = 14,
+       GRF_GPIO1B7_E_MASK = 3 << GRF_GPIO1B7_E_SHIFT,
+
+       /*  GRF_GPIO1C_E */
+       GRF_GPIO1C0_E_SHIFT = 0,
+       GRF_GPIO1C0_E_MASK = 3 << GRF_GPIO1C0_E_SHIFT,
+       GRF_GPIO1C1_E_SHIFT = 2,
+       GRF_GPIO1C1_E_MASK = 3 << GRF_GPIO1C1_E_SHIFT,
+       GRF_GPIO1C3_E_SHIFT = 6,
+       GRF_GPIO1C3_E_MASK = 3 << GRF_GPIO1C3_E_SHIFT,
+       GRF_GPIO1C5_E_SHIFT = 10,
+       GRF_GPIO1C5_E_MASK = 3 << GRF_GPIO1C5_E_SHIFT,
+       GRF_GPIO1C6_E_SHIFT = 12,
+       GRF_GPIO1C6_E_MASK = 3 << GRF_GPIO1C6_E_SHIFT,
+       GRF_GPIO1C7_E_SHIFT = 14,
+       GRF_GPIO1C7_E_MASK = 3 << GRF_GPIO1C7_E_SHIFT,
+
+       /*  GRF_GPIO1D_E */
+       GRF_GPIO1D1_E_SHIFT = 2,
+       GRF_GPIO1D1_E_MASK = 3 << GRF_GPIO1D1_E_SHIFT,
+};
+
+/* GPIO Bias drive strength settings */
+enum GPIO_BIAS {
+       GPIO_BIAS_2MA = 0,
+       GPIO_BIAS_4MA,
+       GPIO_BIAS_8MA,
+       GPIO_BIAS_12MA,
 };
 
 struct rk3328_pinctrl_priv {
@@ -313,6 +461,124 @@ static void pinctrl_rk3328_sdmmc_config(struct rk3328_grf_regs *grf,
        }
 }
 
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+static void pinctrl_rk3328_gmac_config(struct rk3328_grf_regs *grf, int gmac_id)
+{
+       switch (gmac_id) {
+       case PERIPH_ID_GMAC:
+               /* set rgmii m1 pins mux */
+               rk_clrsetreg(&grf->gpio1b_iomux,
+                            GPIO1B0_SEL_MASK |
+                            GPIO1B1_SEL_MASK |
+                            GPIO1B2_SEL_MASK |
+                            GPIO1B3_SEL_MASK |
+                            GPIO1B4_SEL_MASK |
+                            GPIO1B5_SEL_MASK |
+                            GPIO1B6_SEL_MASK |
+                            GPIO1B7_SEL_MASK,
+                            GPIO1B0_GMAC_TXD1M1 << GPIO1B0_SEL_SHIFT |
+                            GPIO1B1_GMAC_TXD0M1 << GPIO1B1_SEL_SHIFT |
+                            GPIO1B2_GMAC_RXD1M1 << GPIO1B2_SEL_SHIFT |
+                            GPIO1B3_GMAC_RXD0M1 << GPIO1B3_SEL_SHIFT |
+                            GPIO1B4_GMAC_TXCLKM1 << GPIO1B4_SEL_SHIFT |
+                            GPIO1B5_GMAC_RXCLKM1 << GPIO1B5_SEL_SHIFT |
+                            GPIO1B6_GMAC_RXD3M1 << GPIO1B6_SEL_SHIFT |
+                            GPIO1B7_GMAC_RXD2M1 << GPIO1B7_SEL_SHIFT);
+
+               rk_clrsetreg(&grf->gpio1c_iomux,
+                            GPIO1C0_SEL_MASK |
+                            GPIO1C1_SEL_MASK |
+                            GPIO1C3_SEL_MASK |
+                            GPIO1C5_SEL_MASK |
+                            GPIO1C6_SEL_MASK |
+                            GPIO1C7_SEL_MASK,
+                            GPIO1C0_GMAC_TXD3M1 << GPIO1C0_SEL_SHIFT |
+                            GPIO1C1_GMAC_TXD2M1 << GPIO1C1_SEL_SHIFT |
+                            GPIO1C3_GMAC_MDIOM1 << GPIO1C3_SEL_SHIFT |
+                            GPIO1C5_GMAC_CLKM1 << GPIO1C5_SEL_SHIFT |
+                            GPIO1C6_GMAC_RXDVM1 << GPIO1C6_SEL_SHIFT |
+                            GPIO1C7_GMAC_MDCM1 << GPIO1C7_SEL_SHIFT);
+
+               rk_clrsetreg(&grf->gpio1d_iomux,
+                            GPIO1D1_SEL_MASK,
+                            GPIO1D1_GMAC_TXENM1 << GPIO1D1_SEL_SHIFT);
+
+               /* set rgmii m0 tx pins mux */
+               rk_clrsetreg(&grf->gpio0b_iomux,
+                            GPIO0B0_SEL_MASK |
+                            GPIO0B4_SEL_MASK,
+                            GPIO0B0_GAMC_CLKTXM0 << GPIO0B0_SEL_SHIFT |
+                            GPIO0B4_GAMC_TXENM0 << GPIO0B4_SEL_SHIFT);
+
+               rk_clrsetreg(&grf->gpio0c_iomux,
+                            GPIO0C0_SEL_MASK |
+                            GPIO0C1_SEL_MASK |
+                            GPIO0C6_SEL_MASK |
+                            GPIO0C7_SEL_MASK,
+                            GPIO0C0_GAMC_TXD1M0 << GPIO0C0_SEL_SHIFT |
+                            GPIO0C1_GAMC_TXD0M0 << GPIO0C1_SEL_SHIFT |
+                            GPIO0C6_GAMC_TXD2M0 << GPIO0C6_SEL_SHIFT |
+                            GPIO0C7_GAMC_TXD3M0 << GPIO0C7_SEL_SHIFT);
+
+               rk_clrsetreg(&grf->gpio0d_iomux,
+                            GPIO0D0_SEL_MASK,
+                            GPIO0D0_GMAC_CLKM0 << GPIO0D0_SEL_SHIFT);
+
+               /* set com mux */
+               rk_clrsetreg(&grf->com_iomux,
+                            IOMUX_SEL_GMAC_MASK |
+                            IOMUX_SEL_GMACM1_OPTIMIZATION_MASK,
+                            IOMUX_SEL_GMAC_M1 << IOMUX_SEL_GMAC_SHIFT |
+                            IOMUX_SEL_GMACM1_OPTIMIZATION_AFTER <<
+                            IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT);
+
+               /*
+                * set rgmii m1 tx pins to 12ma drive-strength,
+                * and clean others to 2ma.
+                */
+               rk_clrsetreg(&grf->gpio1b_e,
+                            GRF_GPIO1B0_E_MASK |
+                            GRF_GPIO1B1_E_MASK |
+                            GRF_GPIO1B2_E_MASK |
+                            GRF_GPIO1B3_E_MASK |
+                            GRF_GPIO1B4_E_MASK |
+                            GRF_GPIO1B5_E_MASK |
+                            GRF_GPIO1B6_E_MASK |
+                            GRF_GPIO1B7_E_MASK,
+                            GPIO_BIAS_12MA << GRF_GPIO1B0_E_SHIFT |
+                            GPIO_BIAS_12MA << GRF_GPIO1B1_E_SHIFT |
+                            GPIO_BIAS_2MA << GRF_GPIO1B2_E_SHIFT |
+                            GPIO_BIAS_2MA << GRF_GPIO1B3_E_SHIFT |
+                            GPIO_BIAS_12MA << GRF_GPIO1B4_E_SHIFT |
+                            GPIO_BIAS_2MA << GRF_GPIO1B5_E_SHIFT |
+                            GPIO_BIAS_2MA << GRF_GPIO1B6_E_SHIFT |
+                            GPIO_BIAS_2MA << GRF_GPIO1B7_E_SHIFT);
+
+               rk_clrsetreg(&grf->gpio1c_e,
+                            GRF_GPIO1C0_E_MASK |
+                            GRF_GPIO1C1_E_MASK |
+                            GRF_GPIO1C3_E_MASK |
+                            GRF_GPIO1C5_E_MASK |
+                            GRF_GPIO1C6_E_MASK |
+                            GRF_GPIO1C7_E_MASK,
+                            GPIO_BIAS_12MA << GRF_GPIO1C0_E_SHIFT |
+                            GPIO_BIAS_12MA << GRF_GPIO1C1_E_SHIFT |
+                            GPIO_BIAS_2MA << GRF_GPIO1C3_E_SHIFT |
+                            GPIO_BIAS_2MA << GRF_GPIO1C5_E_SHIFT |
+                            GPIO_BIAS_2MA << GRF_GPIO1C6_E_SHIFT |
+                            GPIO_BIAS_2MA << GRF_GPIO1C7_E_SHIFT);
+
+               rk_clrsetreg(&grf->gpio1d_e,
+                            GRF_GPIO1D1_E_MASK,
+                            GPIO_BIAS_12MA << GRF_GPIO1D1_E_SHIFT);
+               break;
+       default:
+               debug("gmac id = %d iomux error!\n", gmac_id);
+               break;
+       }
+}
+#endif
+
 static int rk3328_pinctrl_request(struct udevice *dev, int func, int flags)
 {
        struct rk3328_pinctrl_priv *priv = dev_get_priv(dev);
@@ -349,6 +615,11 @@ static int rk3328_pinctrl_request(struct udevice *dev, int func, int flags)
        case PERIPH_ID_SDMMC1:
                pinctrl_rk3328_sdmmc_config(priv->grf, func);
                break;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+       case PERIPH_ID_GMAC:
+               pinctrl_rk3328_gmac_config(priv->grf, func);
+               break;
+#endif
        default:
                return -EINVAL;
        }
@@ -383,6 +654,10 @@ static int rk3328_pinctrl_get_periph_id(struct udevice *dev,
                return PERIPH_ID_SDCARD;
        case 14:
                return PERIPH_ID_EMMC;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+       case 24:
+               return PERIPH_ID_GMAC;
+#endif
        }
 
        return -ENOENT;