phy: stm32-usbphyc: stm32-usbphyc: Add DT phy tuning support

Add support of phy-tuning properties for sm32-usbphyc's phy tuning
aligned with v5.15 kernel bindings.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c
index 9c1dcfae52456c68c6600c027dbc810bcb5b824e..d7f7c37f919cda614360fd6283b97d15a0dc2f38 100644 (file)
--- a/drivers/phy/phy-stm32-usbphyc.c
+++ b/drivers/phy/phy-stm32-usbphyc.c
@@ -17,6 +17,8 @@
 #include <usb.h>
 #include <asm/io.h>
 #include <dm/device_compat.h>
+#include <dm/of_access.h>
+#include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <power/regulator.h>
@@ -24,6 +26,7 @@
 /* USBPHYC registers */
 #define STM32_USBPHYC_PLL      0x0
 #define STM32_USBPHYC_MISC     0x8
+#define STM32_USBPHYC_TUNE(X)  (0x10C + ((X) * 0x100))
 
 /* STM32_USBPHYC_PLL bit fields */
 #define PLLNDIV                        GENMASK(6, 0)
@@ -40,6 +43,26 @@
 /* STM32_USBPHYC_MISC bit fields */
 #define SWITHOST               BIT(0)
 
+/* STM32_USBPHYC_TUNE bit fields */
+#define INCURREN               BIT(0)
+#define INCURRINT              BIT(1)
+#define LFSCAPEN               BIT(2)
+#define HSDRVSLEW              BIT(3)
+#define HSDRVDCCUR             BIT(4)
+#define HSDRVDCLEV             BIT(5)
+#define HSDRVCURINCR           BIT(6)
+#define FSDRVRFADJ             BIT(7)
+#define HSDRVRFRED             BIT(8)
+#define HSDRVCHKITRM           GENMASK(12, 9)
+#define HSDRVCHKZTRM           GENMASK(14, 13)
+#define OTPCOMP                        GENMASK(19, 15)
+#define SQLCHCTL               GENMASK(21, 20)
+#define HDRXGNEQEN             BIT(22)
+#define HSRXOFF                        GENMASK(24, 23)
+#define HSFALLPREEM            BIT(25)
+#define SHTCCTCTLPROT          BIT(26)
+#define STAGSEL                        BIT(27)
+
 #define MAX_PHYS               2
 
 /* max 100 us for PLL lock and 100 us for PHY init */
@@ -49,6 +72,62 @@
 #define PLL_INFF_MIN_RATE      19200000 /* in Hz */
 #define PLL_INFF_MAX_RATE      38400000 /* in Hz */
 
+enum boosting_vals {
+       BOOST_1000_UA = 1000,
+       BOOST_2000_UA = 2000,
+};
+
+enum dc_level_vals {
+       DC_MINUS_5_TO_7_MV,
+       DC_PLUS_5_TO_7_MV,
+       DC_PLUS_10_TO_14_MV,
+       DC_MAX,
+};
+
+enum current_trim {
+       CUR_NOMINAL,
+       CUR_PLUS_1_56_PCT,
+       CUR_PLUS_3_12_PCT,
+       CUR_PLUS_4_68_PCT,
+       CUR_PLUS_6_24_PCT,
+       CUR_PLUS_7_8_PCT,
+       CUR_PLUS_9_36_PCT,
+       CUR_PLUS_10_92_PCT,
+       CUR_PLUS_12_48_PCT,
+       CUR_PLUS_14_04_PCT,
+       CUR_PLUS_15_6_PCT,
+       CUR_PLUS_17_16_PCT,
+       CUR_PLUS_19_01_PCT,
+       CUR_PLUS_20_58_PCT,
+       CUR_PLUS_22_16_PCT,
+       CUR_PLUS_23_73_PCT,
+       CUR_MAX,
+};
+
+enum impedance_trim {
+       IMP_NOMINAL,
+       IMP_MINUS_2_OHMS,
+       IMP_MINUS_4_OMHS,
+       IMP_MINUS_6_OHMS,
+       IMP_MAX,
+};
+
+enum squelch_level {
+       SQLCH_NOMINAL,
+       SQLCH_PLUS_7_MV,
+       SQLCH_MINUS_5_MV,
+       SQLCH_PLUS_14_MV,
+       SQLCH_MAX,
+};
+
+enum rx_offset {
+       NO_RX_OFFSET,
+       RX_OFFSET_PLUS_5_MV,
+       RX_OFFSET_PLUS_10_MV,
+       RX_OFFSET_MINUS_5_MV,
+       RX_OFFSET_MAX,
+};
+
 struct pll_params {
        u8 ndiv;
        u16 frac;
@@ -327,6 +406,90 @@ static int stm32_usbphyc_of_xlate(struct phy *phy,
        return 0;
 }
 
+static void stm32_usbphyc_tuning(struct udevice *dev, ofnode node, u32 index)
+{
+       struct stm32_usbphyc *usbphyc = dev_get_priv(dev);
+       u32 reg = STM32_USBPHYC_TUNE(index);
+       u32 otpcomp, val, tune = 0;
+       int ret;
+
+       /* Backup OTP compensation code */
+       otpcomp = FIELD_GET(OTPCOMP, readl(usbphyc->base + reg));
+
+       ret = ofnode_read_u32(node, "st,current-boost-microamp", &val);
+       if (!ret && (val == BOOST_1000_UA || val == BOOST_2000_UA)) {
+               val = (val == BOOST_2000_UA) ? 1 : 0;
+               tune |= INCURREN | FIELD_PREP(INCURRINT, val);
+       } else if (ret != -EINVAL) {
+               dev_warn(dev, "phy%d: invalid st,current-boost-microamp value\n", index);
+       }
+
+       if (!ofnode_read_bool(node, "st,no-lsfs-fb-cap"))
+               tune |= LFSCAPEN;
+
+       if (ofnode_read_bool(node, "st,decrease-hs-slew-rate"))
+               tune |= HSDRVSLEW;
+
+       ret = ofnode_read_u32(node, "st,tune-hs-dc-level", &val);
+       if (!ret && val < DC_MAX) {
+               if (val == DC_MINUS_5_TO_7_MV) {
+                       tune |= HSDRVDCCUR;
+               } else {
+                       val = (val == DC_PLUS_10_TO_14_MV) ? 1 : 0;
+                       tune |= HSDRVCURINCR | FIELD_PREP(HSDRVDCLEV, val);
+               }
+       } else if (ret != -EINVAL) {
+               dev_warn(dev, "phy%d: invalid st,tune-hs-dc-level value\n", index);
+       }
+
+       if (ofnode_read_bool(node, "st,enable-fs-rftime-tuning"))
+               tune |= FSDRVRFADJ;
+
+       if (ofnode_read_bool(node, "st,enable-hs-rftime-reduction"))
+               tune |= HSDRVRFRED;
+
+       ret = ofnode_read_u32(node, "st,trim-hs-current", &val);
+       if (!ret && val < CUR_MAX)
+               tune |= FIELD_PREP(HSDRVCHKITRM, val);
+       else if (ret != -EINVAL)
+               dev_warn(dev, "phy%d: invalid st,trim-hs-current value\n", index);
+
+       ret = ofnode_read_u32(node, "st,trim-hs-impedance", &val);
+       if (!ret && val < IMP_MAX)
+               tune |= FIELD_PREP(HSDRVCHKZTRM, val);
+       else if (ret != -EINVAL)
+               dev_warn(dev, "phy%d: invalid trim-hs-impedance value\n", index);
+
+       ret = ofnode_read_u32(node, "st,tune-squelch-level", &val);
+       if (!ret && val < SQLCH_MAX)
+               tune |= FIELD_PREP(SQLCHCTL, val);
+       else if (ret != -EINVAL)
+               dev_warn(dev, "phy%d: invalid st,tune-squelch-level value\n", index);
+
+       if (ofnode_read_bool(node, "st,enable-hs-rx-gain-eq"))
+               tune |= HDRXGNEQEN;
+
+       ret = ofnode_read_u32(node, "st,tune-hs-rx-offset", &val);
+       if (!ret && val < RX_OFFSET_MAX)
+               tune |= FIELD_PREP(HSRXOFF, val);
+       else if (ret != -EINVAL)
+               dev_warn(dev, "phy%d: invalid st,tune-hs-rx-offset value\n", index);
+
+       if (ofnode_read_bool(node, "st,no-hs-ftime-ctrl"))
+               tune |= HSFALLPREEM;
+
+       if (!ofnode_read_bool(node, "st,no-lsfs-sc"))
+               tune |= SHTCCTCTLPROT;
+
+       if (ofnode_read_bool(node, "st,enable-hs-tx-staggering"))
+               tune |= STAGSEL;
+
+       /* Restore OTP compensation code */
+       tune |= FIELD_PREP(OTPCOMP, otpcomp);
+
+       writel(tune, usbphyc->base + reg);
+}
+
 static const struct phy_ops stm32_usbphyc_phy_ops = {
        .init = stm32_usbphyc_phy_init,
        .exit = stm32_usbphyc_phy_exit,
@@ -389,6 +552,10 @@ static int stm32_usbphyc_probe(struct udevice *dev)
                                phy_id, ofnode_get_name(node));
                        return -ENOENT;
                }
+
+               /* Configure phy tuning */
+               stm32_usbphyc_tuning(dev, node, phy_id);
+
                usbphyc_phy = usbphyc->phys + phy_id;
                usbphyc_phy->init = false;
                usbphyc_phy->powered = false;