#include <common.h>
#include <dm.h>
+#include <dm/pinctrl.h>
#include <errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
struct bcm2835_gpios {
struct bcm2835_gpio_regs *reg;
+ struct udevice *pinctrl;
};
static int bcm2835_gpio_direction_input(struct udevice *dev, unsigned gpio)
return 0;
}
-static int bcm2835_gpio_direction_output(struct udevice *dev, unsigned gpio,
+static int bcm2835_gpio_direction_output(struct udevice *dev, unsigned int gpio,
int value)
{
struct bcm2835_gpios *gpios = dev_get_priv(dev);
return 0;
}
-int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio)
-{
- struct bcm2835_gpios *gpios = dev_get_priv(dev);
- u32 val;
-
- val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]);
-
- return (val >> BCM2835_GPIO_FSEL_SHIFT(gpio) & BCM2835_GPIO_FSEL_MASK);
-}
-
static int bcm2835_gpio_get_function(struct udevice *dev, unsigned offset)
{
- int funcid = bcm2835_gpio_get_func_id(dev, offset);
+ struct bcm2835_gpios *priv = dev_get_priv(dev);
+ int funcid;
+
+ funcid = pinctrl_get_gpio_mux(priv->pinctrl, 0, offset);
switch (funcid) {
case BCM2835_GPIO_OUTPUT:
}
}
-
static const struct dm_gpio_ops gpio_bcm2835_ops = {
.direction_input = bcm2835_gpio_direction_input,
.direction_output = bcm2835_gpio_direction_output,
uc_priv->gpio_count = BCM2835_GPIO_COUNT;
gpios->reg = (struct bcm2835_gpio_regs *)plat->base;
+ /* We know we're spawned by the pinctrl driver */
+ gpios->pinctrl = dev->parent;
+
return 0;
}
#if CONFIG_IS_ENABLED(OF_CONTROL)
-static const struct udevice_id bcm2835_gpio_id[] = {
- {.compatible = "brcm,bcm2835-gpio"},
- {}
-};
-
static int bcm2835_gpio_ofdata_to_platdata(struct udevice *dev)
{
struct bcm2835_gpio_platdata *plat = dev_get_platdata(dev);
U_BOOT_DRIVER(gpio_bcm2835) = {
.name = "gpio_bcm2835",
.id = UCLASS_GPIO,
- .of_match = of_match_ptr(bcm2835_gpio_id),
.ofdata_to_platdata = of_match_ptr(bcm2835_gpio_ofdata_to_platdata),
.platdata_auto_alloc_size = sizeof(struct bcm2835_gpio_platdata),
.ops = &gpio_bcm2835_ops,
--- /dev/null
+/*
+ * Copyright (C) 2018 Alexander Graf <agraf@suse.de>
+ *
+ * Based on drivers/pinctrl/mvebu/pinctrl-mvebu.c and
+ * drivers/gpio/bcm2835_gpio.c
+ *
+ * This driver gets instantiated by the GPIO driver, because both devices
+ * share the same device node.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <config.h>
+#include <errno.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <dm/root.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+struct bcm283x_pinctrl_priv {
+ u32 *base_reg;
+};
+
+#define MAX_PINS_PER_BANK 16
+
+static void bcm2835_gpio_set_func_id(struct udevice *dev, unsigned int gpio,
+ int func)
+{
+ struct bcm283x_pinctrl_priv *priv = dev_get_priv(dev);
+ int reg_offset;
+ int field_offset;
+
+ reg_offset = BCM2835_GPIO_FSEL_BANK(gpio);
+ field_offset = BCM2835_GPIO_FSEL_SHIFT(gpio);
+
+ clrsetbits_le32(&priv->base_reg[reg_offset],
+ BCM2835_GPIO_FSEL_MASK << field_offset,
+ (func & BCM2835_GPIO_FSEL_MASK) << field_offset);
+}
+
+static int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned int gpio)
+{
+ struct bcm283x_pinctrl_priv *priv = dev_get_priv(dev);
+ u32 val;
+
+ val = readl(&priv->base_reg[BCM2835_GPIO_FSEL_BANK(gpio)]);
+
+ return (val >> BCM2835_GPIO_FSEL_SHIFT(gpio) & BCM2835_GPIO_FSEL_MASK);
+}
+
+/*
+ * bcm283x_pinctrl_set_state: configure pin functions.
+ * @dev: the pinctrl device to be configured.
+ * @config: the state to be configured.
+ * @return: 0 in success
+ */
+int bcm283x_pinctrl_set_state(struct udevice *dev, struct udevice *config)
+{
+ u32 pin_arr[MAX_PINS_PER_BANK];
+ u32 function;
+ int i, len, pin_count = 0;
+
+ if (!dev_read_prop(config, "brcm,pins", &len) || !len ||
+ len & 0x3 || dev_read_u32_array(config, "brcm,pins", pin_arr,
+ len / sizeof(u32))) {
+ debug("Failed reading pins array for pinconfig %s (%d)\n",
+ config->name, len);
+ return -EINVAL;
+ }
+
+ pin_count = len / sizeof(u32);
+
+ function = dev_read_u32_default(config, "brcm,function", -1);
+ if (function < 0) {
+ debug("Failed reading function for pinconfig %s (%d)\n",
+ config->name, function);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < pin_count; i++)
+ bcm2835_gpio_set_func_id(dev, pin_arr[i], function);
+
+ return 0;
+}
+
+static int bcm283x_pinctrl_get_gpio_mux(struct udevice *dev, int banknum,
+ int index)
+{
+ if (banknum != 0)
+ return -EINVAL;
+
+ return bcm2835_gpio_get_func_id(dev, index);
+}
+
+static const struct udevice_id bcm2835_pinctrl_id[] = {
+ {.compatible = "brcm,bcm2835-gpio"},
+ {}
+};
+
+int bcm283x_pinctl_probe(struct udevice *dev)
+{
+ struct bcm283x_pinctrl_priv *priv;
+ int ret;
+ struct udevice *pdev;
+
+ priv = dev_get_priv(dev);
+ if (!priv) {
+ debug("%s: Failed to get private\n", __func__);
+ return -EINVAL;
+ }
+
+ priv->base_reg = dev_read_addr_ptr(dev);
+ if (priv->base_reg == (void *)FDT_ADDR_T_NONE) {
+ debug("%s: Failed to get base address\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Create GPIO device as well */
+ ret = device_bind(dev, lists_driver_lookup_name("gpio_bcm2835"),
+ "gpio_bcm2835", NULL, dev_of_offset(dev), &pdev);
+ if (ret) {
+ /*
+ * While we really want the pinctrl driver to work to make
+ * devices go where they should go, the GPIO controller is
+ * not quite as crucial as it's only rarely used, so don't
+ * fail here.
+ */
+ printf("Failed to bind GPIO driver\n");
+ }
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm283x_pinctrl_ops = {
+ .set_state = bcm283x_pinctrl_set_state,
+ .get_gpio_mux = bcm283x_pinctrl_get_gpio_mux,
+};
+
+U_BOOT_DRIVER(pinctrl_bcm283x) = {
+ .name = "bcm283x_pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(bcm2835_pinctrl_id),
+ .priv_auto_alloc_size = sizeof(struct bcm283x_pinctrl_priv),
+ .ops = &bcm283x_pinctrl_ops,
+ .probe = bcm283x_pinctl_probe
+};
projects / u-boot.git / commitdiff