sunxi: H616: Add OrangePi Zero 2W board support

The OrangePi Zero 2W is a tiny development board featuring the Allwinner
H618 SoC, shipping with up to 4GB of LPDDR4 DRAM, a mini-HDMI connector,
two USB Type-C sockets and a 16MB SPI NOR flash.
There is an FPC connector to connect an expansion board, which sports
two more USB Type-A sockets and a 100MBit Ethernet port. Support for
the expansion board is not in the DT yet, probably a DT overlay would
cover this in the future.

Add a defconfig file selecting the right drivers and DRAM options.
Since the .dts file was synced from the Linux kernel repo already, we
just need to add one line to the Makefile to actually build the .dtb.

The DRAM parameters were derived from the values found in the BSP DRAM
drivers on the SPI NOR flash.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d9725030d5a0557e1f35bc85d0021ddbf9b4aa33..b102ffb5f680e62b30573e3165c9a92ee5ea223b 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -839,6 +839,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \
        sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_MACH_SUN50I_H616) += \
        sun50i-h616-orangepi-zero2.dtb \
+       sun50i-h618-orangepi-zero2w.dtb \
        sun50i-h618-orangepi-zero3.dtb \
        sun50i-h618-transpeed-8k618-t.dtb \
        sun50i-h616-x96-mate.dtb

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index a2da6a4a7a298413729f774cfd746999cbd9ba64..4bcd9b9af7f70f0d3eb28a56ecc757547e4a6ea7 100644 (file)
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -460,6 +460,11 @@ M: Jernej Skrabec <jernej.skrabec@siol.net>
 S:     Maintained
 F:     configs/orangepi_zero2_defconfig
 
+ORANGEPI ZERO 2W BOARD
+M:     Andre Przywara <andre.przywara@arm.com>
+S:     Maintained
+F:     configs/orangepi_zero2w_defconfig
+
 ORANGEPI ZERO 3 BOARD
 M:     Andre Przywara <andre.przywara@arm.com>
 S:     Maintained

diff --git a/configs/orangepi_zero2w_defconfig b/configs/orangepi_zero2w_defconfig
new file mode 100644 (file)
index 0000000..5734d9d
--- /dev/null
+++ b/configs/orangepi_zero2w_defconfig
@@ -0,0 +1,30 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-orangepi-zero2w"
+CONFIG_SPL=y
+CONFIG_DRAM_SUN50I_H616_DX_ODT=0x07070707
+CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
+CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e
+CONFIG_DRAM_SUN50I_H616_ODT_EN=0xaaaaeeee
+CONFIG_DRAM_SUN50I_H616_TPR6=0x48808080
+CONFIG_DRAM_SUN50I_H616_TPR10=0x402f6663
+CONFIG_DRAM_SUN50I_H616_TPR11=0x26262524
+CONFIG_DRAM_SUN50I_H616_TPR12=0x100f100f
+CONFIG_MACH_SUN50I_H616=y
+CONFIG_SUNXI_DRAM_H616_LPDDR4=y
+CONFIG_DRAM_CLK=792
+CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_SPI_SUNXI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_MTD=y
+CONFIG_SPI_FLASH_ZBIT=y
+CONFIG_AXP313_POWER=y
+CONFIG_SPI=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y