EfikaSB: Add preliminary EfikaSB support

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>

diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c
index 5be1f6ca58b554927c24b8a0c1b3dbb01ca7d619..0c4e24bb4cc7f8aae60acd202eb4915aab1a50e2 100644 (file)
--- a/board/efikamx/efikamx.c
+++ b/board/efikamx/efikamx.c
@@ -62,10 +62,13 @@ void efikamx_toggle_led(uint32_t mask);
 #define        EFIKAMX_BOARD_REV_13    0x3
 #define        EFIKAMX_BOARD_REV_14    0x4
 
+#define        EFIKASB_BOARD_REV_13    0x1
+#define        EFIKASB_BOARD_REV_20    0x2
+
 /*
  * Board identification
  */
-u32 get_efika_rev(void)
+u32 get_efikamx_rev(void)
 {
        u32 rev = 0;
        /*
@@ -97,6 +100,31 @@ u32 get_efika_rev(void)
        return (~rev & 0x7) + 1;
 }
 
+inline u32 get_efikasb_rev(void)
+{
+       u32 rev = 0;
+
+       mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_GPIO);
+       mxc_iomux_set_pad(MX51_PIN_EIM_CS3, PAD_CTL_100K_PU);
+       gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3));
+       rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3))) << 0;
+
+       mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_GPIO);
+       mxc_iomux_set_pad(MX51_PIN_EIM_CS4, PAD_CTL_100K_PU);
+       gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4));
+       rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4))) << 1;
+
+       return rev;
+}
+
+inline uint32_t get_efika_rev(void)
+{
+       if (machine_is_efikamx())
+               return get_efikamx_rev();
+       else
+               return get_efikasb_rev();
+}
+
 u32 get_board_rev(void)
 {
        return get_cpu_rev() | (get_efika_rev() << 8);
@@ -268,25 +296,36 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = {
        {MMC_SDHC2_BASE_ADDR, 1},
 };
 
+static inline uint32_t efika_mmc_cd(void)
+{
+       if (machine_is_efikamx())
+               return MX51_PIN_GPIO1_0;
+       else
+               return MX51_PIN_EIM_CS2;
+}
+
 int board_mmc_getcd(u8 *absent, struct mmc *mmc)
 {
        struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+       uint32_t cd = efika_mmc_cd();
 
        if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
-               *absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0));
+               *absent = gpio_get_value(IOMUX_TO_GPIO(cd));
        else
                *absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
 
        return 0;
 }
+
 int board_mmc_init(bd_t *bis)
 {
        int ret;
+       uint32_t cd = efika_mmc_cd();
 
        /* SDHC1 is used on all revisions, setup control pins first */
-       mxc_request_iomux(MX51_PIN_GPIO1_0,
+       mxc_request_iomux(cd,
                IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
-       mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
+       mxc_iomux_set_pad(cd,
                PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
                PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
                PAD_CTL_ODE_OPENDRAIN_NONE |
@@ -298,11 +337,12 @@ int board_mmc_init(bd_t *bis)
                PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
                PAD_CTL_SRE_FAST);
 
-       gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0));
+       gpio_direction_input(IOMUX_TO_GPIO(cd));
        gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1));
 
        /* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */
-       if (get_efika_rev() < EFIKAMX_BOARD_REV_12) {
+       if (machine_is_efikasb() || (machine_is_efikamx() &&
+               (get_efika_rev() < EFIKAMX_BOARD_REV_12))) {
                /* SDHC1 IOMUX */
                mxc_request_iomux(MX51_PIN_SD1_CMD,
                        IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
@@ -414,6 +454,7 @@ int board_mmc_init(bd_t *bis)
 
                ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
        }
+
        return ret;
 }
 #endif
@@ -493,27 +534,44 @@ static inline void setup_iomux_ata(void) { }
  */
 void setup_iomux_led(void)
 {
-       /* Blue LED */
-       mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3);
-       gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0);
-
-       /* Green LED */
-       mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3);
-       gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0);
-
-       /* Red LED */
-       mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3);
-       gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0);
+       if (machine_is_efikamx()) {
+               /* Blue LED */
+               mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3);
+               gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0);
+
+               /* Green LED */
+               mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3);
+               gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0);
+
+               /* Red LED */
+               mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3);
+               gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0);
+       } else {
+               /* CAPS-LOCK LED */
+               mxc_request_iomux(MX51_PIN_EIM_CS0, IOMUX_CONFIG_GPIO);
+               gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0), 0);
+
+               /* ALARM-LED LED */
+               mxc_request_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_GPIO);
+               gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), 0);
+       }
 }
 
 void efikamx_toggle_led(uint32_t mask)
 {
-       gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
-                       mask & EFIKAMX_LED_BLUE);
-       gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
-                       mask & EFIKAMX_LED_GREEN);
-       gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
-                       mask & EFIKAMX_LED_RED);
+       if (machine_is_efikamx()) {
+               gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
+                               mask & EFIKAMX_LED_BLUE);
+               gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
+                               mask & EFIKAMX_LED_GREEN);
+               gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
+                               mask & EFIKAMX_LED_RED);
+       } else {
+               gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0),
+                               mask & EFIKAMX_LED_BLUE);
+               gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3),
+                               !(mask & EFIKAMX_LED_GREEN));
+       }
 }
 
 /*
@@ -607,7 +665,6 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
-       gd->bd->bi_arch_number = MACH_TYPE_MX51_EFIKAMX;
        gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
        return 0;
@@ -629,7 +686,24 @@ int board_late_init(void)
 
 int checkboard(void)
 {
-       puts("Board: Efika MX\n");
+       u32 rev = get_efika_rev();
+
+       if (machine_is_efikamx()) {
+               printf("Board: Efika MX, rev1.%i\n", rev & 0xf);
+               return 0;
+       } else {
+               switch (rev) {
+               case EFIKASB_BOARD_REV_13:
+                       printf("Board: Efika SB rev1.3\n");
+                       break;
+               case EFIKASB_BOARD_REV_20:
+                       printf("Board: Efika SB rev2.0\n");
+                       break;
+               default:
+                       printf("Board: Efika SB, rev Unknown\n");
+                       break;
+               }
+       }
 
        return 0;
 }

diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index fdd0a145af54ec34843cbdafec84eb8ecbff713a..54f48e446d909a5450d434e5466f4b7ed3022ec5 100644 (file)
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -31,6 +31,10 @@
  */
 /* An i.MX51 CPU */
 #define CONFIG_MX51
+
+#define        machine_is_efikamx()    (CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKAMX)
+#define        machine_is_efikasb()    (CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKASB)
+
 #include <asm/arch/imx-regs.h>
 
 #define CONFIG_SYS_MX5_HCLK            24000000