config TARGET_AXS103
bool "Support Synopsys Designware SDP board AXS103"
-config TARGET_EMDK
- bool "Synopsys EM Development kit"
+config TARGET_EMSDP
+ bool "Synopsys EM Software Development Platform"
select CPU_ARCEM6
config TARGET_HSDK
source "board/abilis/tb100/Kconfig"
source "board/synopsys/Kconfig"
source "board/synopsys/axs10x/Kconfig"
-source "board/synopsys/emdk/Kconfig"
+source "board/synopsys/emsdp/Kconfig"
source "board/synopsys/hsdk/Kconfig"
source "board/synopsys/iot_devkit/Kconfig"
dtb-$(CONFIG_TARGET_AXS103) += axs103.dtb
dtb-$(CONFIG_TARGET_NSIM) += nsim.dtb
dtb-$(CONFIG_TARGET_TB100) += abilis_tb100.dtb
-dtb-$(CONFIG_TARGET_EMDK) += emdk.dtb
+dtb-$(CONFIG_TARGET_EMSDP) += emsdp.dtb
dtb-$(CONFIG_TARGET_HSDK) += hsdk.dtb
dtb-$(CONFIG_TARGET_IOT_DEVKIT) += iot_devkit.dtb
#include "skeleton.dtsi"
/ {
- model = "snps,emdk";
+ model = "snps,emsdp";
#address-cells = <1>;
#size-cells = <1>;
-if TARGET_EMDK
+if TARGET_EMSDP
config SYS_BOARD
- default "emdk"
+ default "emsdp"
config SYS_VENDOR
default "synopsys"
config SYS_CONFIG_NAME
- default "emdk"
+ default "emsdp"
endif
EM DEVELOPMENT KIT BOARD
M: Alexey Brodkin <abrodkin@synopsys.com>
S: Maintained
-F: board/synopsys/emdk/
-F: configs/emdk_defconfig
+F: arch/arc/dts/emsdp.dts
+F: board/synopsys/emsdp/
+F: configs/emsdp_defconfig
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += emdk.o
+obj-y += emsdp.o
================================================================================
-Useful notes on bulding and using of U-Boot on ARC EM Development Kit (AKA EMDK)
+Useful notes on bulding and using of U-Boot on
+ARC EM Software Development Platform (AKA EMSDP)
================================================================================
BOARD OVERVIEW
- The DesignWare ARC EM Development Kit is FPGA-bases platform for rapid
- software development on the ARC EM family of processors.
+ The DesignWare ARC EM Software Development Platform is FPGA-bases platform
+ for rapid software development on the ARC EM family of processors.
Since this board is based on FPGA it's possible to load and use different
versions of ARC EM CPUs. U-Boot is built to be run on the simplest
1. Configure U-Boot:
------------------------->8----------------------
- make emdk_defconfig
+ make emsdp_defconfig
------------------------->8----------------------
2. To build Elf file (for example to be used with host debugger via JTAG
EXECUTING U-BOOT
- 1. The EMDK board is supposed to auto-start U-Boot image stored in ROM on
+ 1. The EMSDP board is supposed to auto-start U-Boot image stored in ROM on
power-on. For that make sure VCCIO DIP-switches are all in "off" state.
2. Though it is possible to load U-Boot as a simple Elf file via JTAG right
; /* loop forever till reset */
}
-static int do_emdk_rom(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+static int do_emsdp_rom(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
u32 creg_boot = readl((u32 *)(CREG_BASE + CREG_BOOT_OFFSET));
return CMD_RET_SUCCESS;
}
-cmd_tbl_t cmd_emdk[] = {
- U_BOOT_CMD_MKENT(rom, 2, 0, do_emdk_rom, "", ""),
+cmd_tbl_t cmd_emsdp[] = {
+ U_BOOT_CMD_MKENT(rom, 2, 0, do_emsdp_rom, "", ""),
};
-static int do_emdk(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+static int do_emsdp(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
cmd_tbl_t *c;
- c = find_cmd_tbl(argv[1], cmd_emdk, ARRAY_SIZE(cmd_emdk));
+ c = find_cmd_tbl(argv[1], cmd_emsdp, ARRAY_SIZE(cmd_emsdp));
- /* Strip off leading 'emdk' command */
+ /* Strip off leading 'emsdp' command */
argc--;
argv++;
}
U_BOOT_CMD(
- emdk, CONFIG_SYS_MAXARGS, 0, do_emdk,
- "Synopsys EMDK specific commands",
+ emsdp, CONFIG_SYS_MAXARGS, 0, do_emsdp,
+ "Synopsys EMSDP specific commands",
"rom unlock - Unlock non-volatile memory for writing\n"
- "emdk rom lock - Lock non-volatile memory to prevent writing\n"
+ "emsdp rom lock - Lock non-volatile memory to prevent writing\n"
);
CONFIG_ARC=y
CONFIG_ISA_ARCV2=y
CONFIG_CPU_ARCEM6=y
-CONFIG_TARGET_EMDK=y
+CONFIG_TARGET_EMSDP=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_CLK_FREQ=40000000
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="emdk# "
+CONFIG_SYS_PROMPT="emsdp# "
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
-CONFIG_DEFAULT_DEVICE_TREE="emdk"
+CONFIG_DEFAULT_DEVICE_TREE="emsdp"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_FAT_INTERFACE="mmc"
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
* Copyright (C) 2018 Synopsys, Inc. All rights reserved.
*/
-#ifndef _CONFIG_EMDK_H_
-#define _CONFIG_EMDK_H_
+#ifndef _CONFIG_EMSDP_H_
+#define _CONFIG_EMSDP_H_
#include <linux/sizes.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
"upgrade_image=u-boot.bin\0" \
- "upgrade=emdk rom unlock && " \
+ "upgrade=emsdp rom unlock && " \
"fatload mmc 0 ${loadaddr} ${upgrade_image} && " \
"cp.b ${loadaddr} 0 ${filesize} && " \
"dcache flush && " \
- "emdk rom lock\0"
+ "emsdp rom lock\0"
-#endif /* _CONFIG_EMDK_H_ */
+#endif /* _CONFIG_EMSDP_H_ */