arm: imx8ulp: Update the reset vector in u-boot

Because we have set reset vector to ATF in SPL, have to set it back
to ROM for any reset in u-boot

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/arch/arm/mach-imx/imx8ulp/soc.c b/arch/arm/mach-imx/imx8ulp/soc.c
index 051dec1a5a6fb22461c06f5abf6c3734d5c5c022..5e7bf57a623046c05a69c20269cfa106c8aad0d9 100644 (file)
--- a/arch/arm/mach-imx/imx8ulp/soc.c
+++ b/arch/arm/mach-imx/imx8ulp/soc.c
@@ -321,21 +321,10 @@ void get_board_serial(struct tag_serialnr *serialnr)
 }
 #endif
 
-int arch_cpu_init(void)
+static void set_core0_reset_vector(u32 entry)
 {
-       if (IS_ENABLED(CONFIG_SPL_BUILD))
-               clock_init();
-
-       return 0;
-}
-
-#if defined(CONFIG_SPL_BUILD)
-__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
-{
-       debug("image entry point: 0x%lx\n", spl_image->entry_point);
-
        /* Update SIM1 DGO8 for reset vector base */
-       writel((u32)spl_image->entry_point, SIM1_BASE_ADDR + 0x5c);
+       writel(entry, SIM1_BASE_ADDR + 0x5c);
 
        /* set update bit */
        setbits_le32(SIM1_BASE_ADDR + 0x8, 0x1 << 24);
@@ -349,6 +338,26 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 
        /* clear the ack by set 1 */
        setbits_le32(SIM1_BASE_ADDR + 0x8, (0x1 << 26));
+}
+
+int arch_cpu_init(void)
+{
+       if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+               clock_init();
+       } else {
+               /* reconfigure core0 reset vector to ROM */
+               set_core0_reset_vector(0x1000);
+       }
+
+       return 0;
+}
+
+#if defined(CONFIG_SPL_BUILD)
+__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+       debug("image entry point: 0x%lx\n", spl_image->entry_point);
+
+       set_core0_reset_vector((u32)spl_image->entry_point);
 
        /* Enable the 512KB cache */
        setbits_le32(SIM1_BASE_ADDR + 0x30, (0x1 << 4));