net: phy: dp83867: Add SGMII mode type switching

This patch adds ability to switch beetween two PHY SGMII modes.
Some hardware, for example, FPGA IP designs may use 6-wire mode
which enables differential SGMII clock to MAC.

Patch description, dt flags have been done in mainline Linux by
commit a2111c460c0c ("net: phy: dp83867: Add documentation for SGMII mode type")
and by commit 507ddd5c0d47 ("net: phy: dp83867: Add SGMII mode type switching")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 0098997c0cd9bf0f349c07b5145473328d5e9b5f..50804c130efd1d87d4b326260a16c5106cccc8b8 100644 (file)
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -29,6 +29,7 @@
 #define DP83867_STRAP_STS2     0x006f
 #define DP83867_RGMIIDCTL      0x0086
 #define DP83867_IO_MUX_CFG     0x0170
+#define DP83867_SGMIICTL       0x00D3
 
 #define DP83867_SW_RESET       BIT(15)
 #define DP83867_SW_RESTART     BIT(14)
@@ -101,6 +102,9 @@
 /* CFG4 bits */
 #define DP83867_CFG4_PORT_MIRROR_EN            BIT(0)
 
+/* SGMIICTL bits */
+#define DP83867_SGMII_TYPE                     BIT(14)
+
 enum {
        DP83867_PORT_MIRRORING_KEEP,
        DP83867_PORT_MIRRORING_EN,
@@ -116,6 +120,7 @@ struct dp83867_private {
        int port_mirroring;
        bool set_clk_output;
        unsigned int clk_output_sel;
+       bool sgmii_ref_clk_en;
 };
 
 static int dp83867_config_port_mirroring(struct phy_device *phydev)
@@ -236,6 +241,9 @@ static int dp83867_of_init(struct phy_device *phydev)
        if (ofnode_read_bool(node, "enet-phy-lane-no-swap"))
                dp83867->port_mirroring = DP83867_PORT_MIRRORING_DIS;
 
+       if (ofnode_read_bool(node, "ti,sgmii-ref-clock-output-enable"))
+               dp83867->sgmii_ref_clk_en = true;
+
        return 0;
 }
 #else
@@ -331,6 +339,10 @@ static int dp83867_config(struct phy_device *phydev)
        }
 
        if (phy_interface_is_sgmii(phydev)) {
+               if (dp83867->sgmii_ref_clk_en)
+                       phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL,
+                                     DP83867_SGMII_TYPE);
+
                phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
                          (BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));