help
Say y to enable STM32 Extended TrustZone Protection
+config CMD_STM32PROG
+ bool "command stm32prog for STM32CudeProgrammer"
+ select DFU
+ select DFU_RAM
+ select DFU_VIRT
+ help
+ activate a specific command stm32prog for STM32MP soc family
+ witch update the device with the tools STM32CubeProgrammer,
+ using UART with STM32 protocol or USB with DFU protocol
+ NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
+ on U-Boot DFU framework
+
config CMD_STM32KEY
bool "command stm32key to fuse public key hash"
default y
ifdef CONFIG_SPL_BUILD
obj-y += spl.o
else
+obj-$(CONFIG_CMD_STM32PROG) += cmd_stm32prog/
obj-y += bsec.o
obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o
obj-$(CONFIG_ARMV7_PSCI) += psci.o
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+#
+
+obj-y += cmd_stm32prog.o
+obj-y += stm32prog.o
+obj-y += stm32prog_usb.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <command.h>
+#include <dfu.h>
+#include "stm32prog.h"
+
+struct stm32prog_data *stm32prog_data;
+
+static int do_stm32prog(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ ulong addr, size;
+ int dev, ret;
+ enum stm32prog_link_t link = LINK_UNDEFINED;
+ bool reset = false;
+ struct stm32prog_data *data;
+
+ if (argc < 3 || argc > 5)
+ return CMD_RET_USAGE;
+
+ if (!strcmp(argv[1], "usb"))
+ link = LINK_USB;
+
+ if (link == LINK_UNDEFINED) {
+ pr_err("not supported link=%s\n", argv[1]);
+ return CMD_RET_USAGE;
+ }
+ dev = (int)simple_strtoul(argv[2], NULL, 10);
+
+ addr = STM32_DDR_BASE;
+ size = 0;
+ if (argc > 3) {
+ addr = simple_strtoul(argv[3], NULL, 16);
+ if (!addr)
+ return CMD_RET_FAILURE;
+ }
+ if (argc > 4)
+ size = simple_strtoul(argv[4], NULL, 16);
+
+ data = (struct stm32prog_data *)malloc(sizeof(*data));
+
+ if (!data) {
+ pr_err("Alloc failed.");
+ return CMD_RET_FAILURE;
+ }
+ stm32prog_data = data;
+
+ ret = stm32prog_init(data, addr, size);
+ if (ret)
+ printf("Invalid or missing layout file.");
+
+ /* prepare DFU for device read/write */
+ ret = stm32prog_dfu_init(data);
+ if (ret)
+ goto cleanup;
+
+ switch (link) {
+ case LINK_USB:
+ reset = stm32prog_usb_loop(data, dev);
+ break;
+ default:
+ goto cleanup;
+ }
+
+ stm32prog_clean(data);
+ free(stm32prog_data);
+ stm32prog_data = NULL;
+
+ puts("Download done\n");
+ if (reset) {
+ puts("Reset...\n");
+ run_command("reset", 0);
+ }
+
+ return CMD_RET_SUCCESS;
+
+cleanup:
+ stm32prog_clean(data);
+ free(stm32prog_data);
+ stm32prog_data = NULL;
+
+ return CMD_RET_FAILURE;
+}
+
+U_BOOT_CMD(stm32prog, 5, 0, do_stm32prog,
+ "<link> <dev> [<addr>] [<size>]\n"
+ "start communication with tools STM32Cubeprogrammer on <link> with Flashlayout at <addr>",
+ "<link> = usb\n"
+ "<dev> = device instance\n"
+ "<addr> = address of flashlayout\n"
+ "<size> = size of flashlayout\n"
+);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <console.h>
+#include <dfu.h>
+#include <malloc.h>
+#include <dm/uclass.h>
+#include <linux/list.h>
+#include <linux/list_sort.h>
+#include <linux/sizes.h>
+
+#include "stm32prog.h"
+
+#define OPT_SELECT BIT(0)
+#define OPT_EMPTY BIT(1)
+
+#define IS_SELECT(part) ((part)->option & OPT_SELECT)
+#define IS_EMPTY(part) ((part)->option & OPT_EMPTY)
+
+#define ALT_BUF_LEN SZ_1K
+
+DECLARE_GLOBAL_DATA_PTR;
+
+char *stm32prog_get_error(struct stm32prog_data *data)
+{
+ static const char error_msg[] = "Unspecified";
+
+ if (strlen(data->error) == 0)
+ strcpy(data->error, error_msg);
+
+ return data->error;
+}
+
+static int parse_flash_layout(struct stm32prog_data *data,
+ ulong addr,
+ ulong size)
+{
+ return -ENODEV;
+}
+
+static int __init part_cmp(void *priv, struct list_head *a, struct list_head *b)
+{
+ struct stm32prog_part_t *parta, *partb;
+
+ parta = container_of(a, struct stm32prog_part_t, list);
+ partb = container_of(b, struct stm32prog_part_t, list);
+
+ return parta->addr > partb->addr ? 1 : -1;
+}
+
+static int init_device(struct stm32prog_data *data,
+ struct stm32prog_dev_t *dev)
+{
+ struct blk_desc *block_dev = NULL;
+ int part_id;
+ u64 first_addr = 0, last_addr = 0;
+ struct stm32prog_part_t *part, *next_part;
+
+ switch (dev->target) {
+ default:
+ stm32prog_err("unknown device type = %d", dev->target);
+ return -ENODEV;
+ }
+
+ /* order partition list in offset order */
+ list_sort(NULL, &dev->part_list, &part_cmp);
+ part_id = 1;
+ pr_debug("id : Opt Phase Name target.n dev.n addr size part_off part_size\n");
+ list_for_each_entry(part, &dev->part_list, list) {
+ if (part->part_type == RAW_IMAGE) {
+ part->part_id = 0x0;
+ part->addr = 0x0;
+ if (block_dev)
+ part->size = block_dev->lba * block_dev->blksz;
+ else
+ part->size = last_addr;
+ pr_debug("-- : %1d %02x %14s %02d %02d.%02d %08llx %08llx\n",
+ part->option, part->id, part->name,
+ part->part_type, part->target,
+ part->dev_id, part->addr, part->size);
+ continue;
+ }
+
+ part->part_id = part_id++;
+
+ /* last partition : size to the end of the device */
+ if (part->list.next != &dev->part_list) {
+ next_part =
+ container_of(part->list.next,
+ struct stm32prog_part_t,
+ list);
+ if (part->addr < next_part->addr) {
+ part->size = next_part->addr -
+ part->addr;
+ } else {
+ stm32prog_err("%s (0x%x): same address : 0x%llx == %s (0x%x): 0x%llx",
+ part->name, part->id,
+ part->addr,
+ next_part->name,
+ next_part->id,
+ next_part->addr);
+ return -EINVAL;
+ }
+ } else {
+ if (part->addr <= last_addr) {
+ part->size = last_addr - part->addr;
+ } else {
+ stm32prog_err("%s (0x%x): invalid address 0x%llx (max=0x%llx)",
+ part->name, part->id,
+ part->addr, last_addr);
+ return -EINVAL;
+ }
+ }
+ if (part->addr < first_addr) {
+ stm32prog_err("%s (0x%x): invalid address 0x%llx (min=0x%llx)",
+ part->name, part->id,
+ part->addr, first_addr);
+ return -EINVAL;
+ }
+
+ pr_debug("%02d : %1d %02x %14s %02d %02d.%02d %08llx %08llx",
+ part->part_id, part->option, part->id, part->name,
+ part->part_type, part->target,
+ part->dev_id, part->addr, part->size);
+ }
+ return 0;
+}
+
+static int treat_partition_list(struct stm32prog_data *data)
+{
+ int i, j;
+ struct stm32prog_part_t *part;
+
+ for (j = 0; j < STM32PROG_MAX_DEV; j++) {
+ data->dev[j].target = STM32PROG_NONE;
+ INIT_LIST_HEAD(&data->dev[j].part_list);
+ }
+
+ for (i = 0; i < data->part_nb; i++) {
+ part = &data->part_array[i];
+ part->alt_id = -1;
+
+ /* skip partition with IP="none" */
+ if (part->target == STM32PROG_NONE) {
+ if (IS_SELECT(part)) {
+ stm32prog_err("Layout: selected none phase = 0x%x",
+ part->id);
+ return -EINVAL;
+ }
+ continue;
+ }
+
+ if (part->id == PHASE_FLASHLAYOUT ||
+ part->id > PHASE_LAST_USER) {
+ stm32prog_err("Layout: invalid phase = 0x%x",
+ part->id);
+ return -EINVAL;
+ }
+ for (j = i + 1; j < data->part_nb; j++) {
+ if (part->id == data->part_array[j].id) {
+ stm32prog_err("Layout: duplicated phase 0x%x at line %d and %d",
+ part->id, i, j);
+ return -EINVAL;
+ }
+ }
+ for (j = 0; j < STM32PROG_MAX_DEV; j++) {
+ if (data->dev[j].target == STM32PROG_NONE) {
+ /* new device found */
+ data->dev[j].target = part->target;
+ data->dev[j].dev_id = part->dev_id;
+ data->dev_nb++;
+ break;
+ } else if ((part->target == data->dev[j].target) &&
+ (part->dev_id == data->dev[j].dev_id)) {
+ break;
+ }
+ }
+ if (j == STM32PROG_MAX_DEV) {
+ stm32prog_err("Layout: too many device");
+ return -EINVAL;
+ }
+ part->dev = &data->dev[j];
+ list_add_tail(&part->list, &data->dev[j].part_list);
+ }
+
+ return 0;
+}
+
+static int stm32prog_alt_add(struct stm32prog_data *data,
+ struct dfu_entity *dfu,
+ struct stm32prog_part_t *part)
+{
+ int ret = 0;
+ int offset = 0;
+ char devstr[10];
+ char dfustr[10];
+ char buf[ALT_BUF_LEN];
+ u32 size;
+ char multiplier, type;
+
+ /* max 3 digit for sector size */
+ if (part->size > SZ_1M) {
+ size = (u32)(part->size / SZ_1M);
+ multiplier = 'M';
+ } else if (part->size > SZ_1K) {
+ size = (u32)(part->size / SZ_1K);
+ multiplier = 'K';
+ } else {
+ size = (u32)part->size;
+ multiplier = 'B';
+ }
+ if (IS_SELECT(part) && !IS_EMPTY(part))
+ type = 'e'; /*Readable and Writeable*/
+ else
+ type = 'a';/*Readable*/
+
+ memset(buf, 0, sizeof(buf));
+ offset = snprintf(buf, ALT_BUF_LEN - offset,
+ "@%s/0x%02x/1*%d%c%c ",
+ part->name, part->id,
+ size, multiplier, type);
+
+ if (part->part_type == RAW_IMAGE) {
+ u64 dfu_size;
+
+ dfu_size = part->size;
+ offset += snprintf(buf + offset, ALT_BUF_LEN - offset,
+ "raw 0x0 0x%llx", dfu_size);
+ } else {
+ offset += snprintf(buf + offset,
+ ALT_BUF_LEN - offset,
+ "part");
+ offset += snprintf(buf + offset, ALT_BUF_LEN - offset,
+ " %d;", part->part_id);
+ }
+ switch (part->target) {
+ default:
+ stm32prog_err("invalid target: %d", part->target);
+ return -ENODEV;
+ }
+ pr_debug("dfu_alt_add(%s,%s,%s)\n", dfustr, devstr, buf);
+ ret = dfu_alt_add(dfu, dfustr, devstr, buf);
+ pr_debug("dfu_alt_add(%s,%s,%s) result %d\n",
+ dfustr, devstr, buf, ret);
+
+ return ret;
+}
+
+static int stm32prog_alt_add_virt(struct dfu_entity *dfu,
+ char *name, int phase, int size)
+{
+ int ret = 0;
+ char devstr[4];
+ char buf[ALT_BUF_LEN];
+
+ sprintf(devstr, "%d", phase);
+ sprintf(buf, "@%s/0x%02x/1*%dBe", name, phase, size);
+ ret = dfu_alt_add(dfu, "virt", devstr, buf);
+ pr_debug("dfu_alt_add(virt,%s,%s) result %d\n", devstr, buf, ret);
+
+ return ret;
+}
+
+static int dfu_init_entities(struct stm32prog_data *data)
+{
+ int ret = 0;
+ int phase, i, alt_id;
+ struct stm32prog_part_t *part;
+ struct dfu_entity *dfu;
+ int alt_nb;
+
+ alt_nb = 1; /* number of virtual = CMD */
+ if (data->part_nb == 0)
+ alt_nb++; /* +1 for FlashLayout */
+ else
+ for (i = 0; i < data->part_nb; i++) {
+ if (data->part_array[i].target != STM32PROG_NONE)
+ alt_nb++;
+ }
+
+ if (dfu_alt_init(alt_nb, &dfu))
+ return -ENODEV;
+
+ puts("DFU alt info setting: ");
+ if (data->part_nb) {
+ alt_id = 0;
+ for (phase = 1;
+ (phase <= PHASE_LAST_USER) &&
+ (alt_id < alt_nb) && !ret;
+ phase++) {
+ /* ordering alt setting by phase id */
+ part = NULL;
+ for (i = 0; i < data->part_nb; i++) {
+ if (phase == data->part_array[i].id) {
+ part = &data->part_array[i];
+ break;
+ }
+ }
+ if (!part)
+ continue;
+ if (part->target == STM32PROG_NONE)
+ continue;
+ part->alt_id = alt_id;
+ alt_id++;
+
+ ret = stm32prog_alt_add(data, dfu, part);
+ }
+ } else {
+ char buf[ALT_BUF_LEN];
+
+ sprintf(buf, "@FlashLayout/0x%02x/1*256Ke ram %x 40000",
+ PHASE_FLASHLAYOUT, STM32_DDR_BASE);
+ ret = dfu_alt_add(dfu, "ram", NULL, buf);
+ pr_debug("dfu_alt_add(ram, NULL,%s) result %d\n", buf, ret);
+ }
+
+ if (!ret)
+ ret = stm32prog_alt_add_virt(dfu, "virtual", PHASE_CMD, 512);
+
+ if (ret)
+ stm32prog_err("dfu init failed: %d", ret);
+ puts("done\n");
+
+#ifdef DEBUG
+ dfu_show_entities();
+#endif
+ return ret;
+}
+
+static void stm32prog_end_phase(struct stm32prog_data *data)
+{
+ if (data->phase == PHASE_FLASHLAYOUT) {
+ if (parse_flash_layout(data, STM32_DDR_BASE, 0))
+ stm32prog_err("Layout: invalid FlashLayout");
+ return;
+ }
+
+ if (!data->cur_part)
+ return;
+}
+
+void stm32prog_do_reset(struct stm32prog_data *data)
+{
+ if (data->phase == PHASE_RESET) {
+ data->phase = PHASE_DO_RESET;
+ puts("Reset requested\n");
+ }
+}
+
+void stm32prog_next_phase(struct stm32prog_data *data)
+{
+ int phase, i;
+ struct stm32prog_part_t *part;
+ bool found;
+
+ phase = data->phase;
+ switch (phase) {
+ case PHASE_RESET:
+ case PHASE_END:
+ case PHASE_DO_RESET:
+ return;
+ }
+
+ /* found next selected partition */
+ data->cur_part = NULL;
+ data->phase = PHASE_END;
+ found = false;
+ do {
+ phase++;
+ if (phase > PHASE_LAST_USER)
+ break;
+ for (i = 0; i < data->part_nb; i++) {
+ part = &data->part_array[i];
+ if (part->id == phase) {
+ if (IS_SELECT(part) && !IS_EMPTY(part)) {
+ data->cur_part = part;
+ data->phase = phase;
+ found = true;
+ }
+ break;
+ }
+ }
+ } while (!found);
+
+ if (data->phase == PHASE_END)
+ puts("Phase=END\n");
+}
+
+static void stm32prog_devices_init(struct stm32prog_data *data)
+{
+ int i;
+ int ret;
+
+ ret = treat_partition_list(data);
+ if (ret)
+ goto error;
+
+ /* initialize the selected device */
+ for (i = 0; i < data->dev_nb; i++) {
+ ret = init_device(data, &data->dev[i]);
+ if (ret)
+ goto error;
+ }
+
+ return;
+
+error:
+ data->part_nb = 0;
+}
+
+int stm32prog_dfu_init(struct stm32prog_data *data)
+{
+ /* init device if no error */
+ if (data->part_nb)
+ stm32prog_devices_init(data);
+
+ if (data->part_nb)
+ stm32prog_next_phase(data);
+
+ /* prepare DFU for device read/write */
+ dfu_free_entities();
+ return dfu_init_entities(data);
+}
+
+int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size)
+{
+ memset(data, 0x0, sizeof(*data));
+ data->phase = PHASE_FLASHLAYOUT;
+
+ return parse_flash_layout(data, addr, size);
+}
+
+void stm32prog_clean(struct stm32prog_data *data)
+{
+ /* clean */
+ dfu_free_entities();
+ free(data->part_array);
+ free(data->header_data);
+}
+
+/* DFU callback: used after serial and direct DFU USB access */
+void dfu_flush_callback(struct dfu_entity *dfu)
+{
+ if (!stm32prog_data)
+ return;
+
+ if (dfu->dev_type == DFU_DEV_RAM) {
+ if (dfu->alt == 0 &&
+ stm32prog_data->phase == PHASE_FLASHLAYOUT) {
+ stm32prog_end_phase(stm32prog_data);
+ /* waiting DFU DETACH for reenumeration */
+ }
+ }
+
+ if (!stm32prog_data->cur_part)
+ return;
+
+ if (dfu->alt == stm32prog_data->cur_part->alt_id) {
+ stm32prog_end_phase(stm32prog_data);
+ stm32prog_next_phase(stm32prog_data);
+ }
+}
+
+void dfu_initiated_callback(struct dfu_entity *dfu)
+{
+ if (!stm32prog_data)
+ return;
+
+ if (!stm32prog_data->cur_part)
+ return;
+
+ /* force the saved offset for the current partition */
+ if (dfu->alt == stm32prog_data->cur_part->alt_id) {
+ dfu->offset = stm32prog_data->offset;
+ pr_debug("dfu offset = 0x%llx\n", dfu->offset);
+ }
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef _STM32PROG_H_
+#define _STM32PROG_H_
+
+/* - phase defines ------------------------------------------------*/
+#define PHASE_FLASHLAYOUT 0x00
+#define PHASE_FIRST_USER 0x10
+#define PHASE_LAST_USER 0xF0
+#define PHASE_CMD 0xF1
+#define PHASE_END 0xFE
+#define PHASE_RESET 0xFF
+#define PHASE_DO_RESET 0x1FF
+
+#define DEFAULT_ADDRESS 0xFFFFFFFF
+
+enum stm32prog_target {
+ STM32PROG_NONE,
+};
+
+enum stm32prog_link_t {
+ LINK_USB,
+ LINK_UNDEFINED,
+};
+
+struct image_header_s {
+ bool present;
+ u32 image_checksum;
+ u32 image_length;
+};
+
+struct raw_header_s {
+ u32 magic_number;
+ u32 image_signature[64 / 4];
+ u32 image_checksum;
+ u32 header_version;
+ u32 image_length;
+ u32 image_entry_point;
+ u32 reserved1;
+ u32 load_address;
+ u32 reserved2;
+ u32 version_number;
+ u32 option_flags;
+ u32 ecdsa_algorithm;
+ u32 ecdsa_public_key[64 / 4];
+ u32 padding[83 / 4];
+ u32 binary_type;
+};
+
+#define BL_HEADER_SIZE sizeof(struct raw_header_s)
+
+/* partition type in flashlayout file */
+enum stm32prog_part_type {
+ PART_BINARY,
+ PART_SYSTEM,
+ PART_FILESYSTEM,
+ RAW_IMAGE
+};
+
+/* device information */
+struct stm32prog_dev_t {
+ enum stm32prog_target target;
+ char dev_id;
+ /* list of partition for this device / ordered in offset */
+ struct list_head part_list;
+};
+
+/* partition information build from FlashLayout and device */
+struct stm32prog_part_t {
+ /* FlashLayout information */
+ int option;
+ int id;
+ enum stm32prog_part_type part_type;
+ enum stm32prog_target target;
+ char dev_id;
+
+ /* partition name
+ * (16 char in gpt, + 1 for null terminated string
+ */
+ char name[16 + 1];
+ u64 addr;
+ u64 size;
+
+ /* information on associated device */
+ struct stm32prog_dev_t *dev; /* pointer to device */
+ u16 part_id; /* partition id in device */
+ int alt_id; /* alt id in usb/dfu */
+
+ struct list_head list;
+};
+
+#define STM32PROG_MAX_DEV 5
+struct stm32prog_data {
+ /* Layout information */
+ int dev_nb; /* device number*/
+ struct stm32prog_dev_t dev[STM32PROG_MAX_DEV]; /* array of device */
+ int part_nb; /* nb of partition */
+ struct stm32prog_part_t *part_array; /* array of partition */
+
+ /* command internal information */
+ unsigned int phase;
+ u32 offset;
+ char error[255];
+ struct stm32prog_part_t *cur_part;
+
+ /* STM32 header information */
+ struct raw_header_s *header_data;
+ struct image_header_s header;
+};
+
+extern struct stm32prog_data *stm32prog_data;
+
+/* generic part*/
+u8 stm32prog_header_check(struct raw_header_s *raw_header,
+ struct image_header_s *header);
+int stm32prog_dfu_init(struct stm32prog_data *data);
+void stm32prog_next_phase(struct stm32prog_data *data);
+void stm32prog_do_reset(struct stm32prog_data *data);
+
+char *stm32prog_get_error(struct stm32prog_data *data);
+
+#define stm32prog_err(args...) {\
+ if (data->phase != PHASE_RESET) { \
+ sprintf(data->error, args); \
+ data->phase = PHASE_RESET; \
+ pr_err("Error: %s\n", data->error); } \
+ }
+
+/* Main function */
+int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size);
+bool stm32prog_usb_loop(struct stm32prog_data *data, int dev);
+void stm32prog_clean(struct stm32prog_data *data);
+
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <dfu.h>
+#include <g_dnl.h>
+#include <usb.h>
+#include <asm/arch/stm32prog.h>
+#include <asm/arch/sys_proto.h>
+#include "stm32prog.h"
+
+static int stm32prog_set_phase(struct stm32prog_data *data, u8 phase,
+ u32 offset)
+{
+ struct stm32prog_part_t *part;
+ int i;
+
+ if (phase == data->phase) {
+ data->offset = offset;
+ return 0;
+ }
+
+ /* found partition for phase */
+ for (i = 0; i < data->part_nb; i++) {
+ part = &data->part_array[i];
+ if (part->id == phase) {
+ data->cur_part = part;
+ data->phase = phase;
+ data->offset = offset;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int stm32prog_cmd_write(u64 offset, void *buf, long *len)
+{
+ u8 phase;
+ u32 address;
+ u8 *pt = buf;
+ void (*entry)(void);
+ int ret;
+
+ if (*len < 5) {
+ pr_err("size not allowed\n");
+ return -EINVAL;
+ }
+ if (offset) {
+ pr_err("invalid offset\n");
+ return -EINVAL;
+ }
+ phase = pt[0];
+ address = (pt[1] << 24) | (pt[2] << 16) | (pt[3] << 8) | pt[4];
+ if (phase == PHASE_RESET) {
+ entry = (void *)address;
+ printf("## Starting application at 0x%x ...\n", address);
+ (*entry)();
+ printf("## Application terminated\n");
+ return 0;
+ }
+ /* set phase and offset */
+ ret = stm32prog_set_phase(stm32prog_data, phase, address);
+ if (ret)
+ pr_err("failed: %d\n", ret);
+ return ret;
+}
+
+#define PHASE_MIN_SIZE 9
+static int stm32prog_cmd_read(u64 offset, void *buf, long *len)
+{
+ u32 destination = DEFAULT_ADDRESS; /* destination address */
+ u32 dfu_offset;
+ u8 *pt_buf = buf;
+ int phase;
+ char *err_msg;
+ int length;
+
+ if (*len < PHASE_MIN_SIZE) {
+ pr_err("request exceeds allowed area\n");
+ return -EINVAL;
+ }
+ if (offset) {
+ *len = 0; /* EOF for second request */
+ return 0;
+ }
+ phase = stm32prog_data->phase;
+ if (phase == PHASE_FLASHLAYOUT)
+ destination = STM32_DDR_BASE;
+ dfu_offset = stm32prog_data->offset;
+
+ /* mandatory header, size = PHASE_MIN_SIZE */
+ *pt_buf++ = (u8)(phase & 0xFF);
+ *pt_buf++ = (u8)(destination);
+ *pt_buf++ = (u8)(destination >> 8);
+ *pt_buf++ = (u8)(destination >> 16);
+ *pt_buf++ = (u8)(destination >> 24);
+ *pt_buf++ = (u8)(dfu_offset);
+ *pt_buf++ = (u8)(dfu_offset >> 8);
+ *pt_buf++ = (u8)(dfu_offset >> 16);
+ *pt_buf++ = (u8)(dfu_offset >> 24);
+
+ if (phase == PHASE_RESET || phase == PHASE_DO_RESET) {
+ err_msg = stm32prog_get_error(stm32prog_data);
+ length = strlen(err_msg);
+ if (length + PHASE_MIN_SIZE > *len)
+ length = *len - PHASE_MIN_SIZE;
+
+ memcpy(pt_buf, err_msg, length);
+ *len = PHASE_MIN_SIZE + length;
+ stm32prog_do_reset(stm32prog_data);
+ } else if (phase == PHASE_FLASHLAYOUT) {
+ *pt_buf++ = stm32prog_data->part_nb ? 1 : 0;
+ *len = PHASE_MIN_SIZE + 1;
+ } else {
+ *len = PHASE_MIN_SIZE;
+ }
+
+ return 0;
+}
+
+int stm32prog_write_medium_virt(struct dfu_entity *dfu, u64 offset,
+ void *buf, long *len)
+{
+ if (dfu->dev_type != DFU_DEV_VIRT)
+ return -EINVAL;
+
+ switch (dfu->data.virt.dev_num) {
+ case PHASE_CMD:
+ return stm32prog_cmd_write(offset, buf, len);
+ }
+ *len = 0;
+ return 0;
+}
+
+int stm32prog_read_medium_virt(struct dfu_entity *dfu, u64 offset,
+ void *buf, long *len)
+{
+ if (dfu->dev_type != DFU_DEV_VIRT)
+ return -EINVAL;
+
+ switch (dfu->data.virt.dev_num) {
+ case PHASE_CMD:
+ return stm32prog_cmd_read(offset, buf, len);
+ }
+ *len = 0;
+ return 0;
+}
+
+int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size)
+{
+ if (dfu->dev_type != DFU_DEV_VIRT) {
+ *size = 0;
+ pr_debug("%s, invalid dev_type = %d\n",
+ __func__, dfu->dev_type);
+ return -EINVAL;
+ }
+
+ switch (dfu->data.virt.dev_num) {
+ case PHASE_CMD:
+ *size = 512;
+ break;
+ }
+
+ return 0;
+}
+
+bool stm32prog_usb_loop(struct stm32prog_data *data, int dev)
+{
+ int ret;
+ bool result;
+ /* USB download gadget for STM32 Programmer */
+ char product[128];
+
+ snprintf(product, sizeof(product),
+ "USB download gadget@Device ID /0x%03X, @Revision ID /0x%04X",
+ get_cpu_dev(), get_cpu_rev());
+ g_dnl_set_product(product);
+
+ if (stm32prog_data->phase == PHASE_FLASHLAYOUT) {
+ ret = run_usb_dnl_gadget(dev, "usb_dnl_dfu");
+ if (ret || stm32prog_data->phase == PHASE_DO_RESET)
+ return ret;
+ /* prepare the second enumeration with the FlashLayout */
+ if (stm32prog_data->phase == PHASE_FLASHLAYOUT)
+ stm32prog_dfu_init(data);
+ /* found next selected partition */
+ stm32prog_next_phase(data);
+ }
+
+ ret = run_usb_dnl_gadget(dev, "usb_dnl_dfu");
+
+ result = !!(ret) || (stm32prog_data->phase == PHASE_DO_RESET);
+
+ g_dnl_set_product(NULL);
+
+ return result;
+}
+
+int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+ pr_debug("%s\n", __func__);
+ return 0x200;
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#define STM32PROG_VIRT_FIRST_DEV_NUM 0xF1
+
+int stm32prog_write_medium_virt(struct dfu_entity *dfu, u64 offset,
+ void *buf, long *len);
+int stm32prog_read_medium_virt(struct dfu_entity *dfu, u64 offset,
+ void *buf, long *len);
+int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size);
#include <misc.h>
#include <mtd.h>
#include <mtd_node.h>
+#include <asm/arch/stm32prog.h>
#define DFU_ALT_BUF_LEN SZ_1K
case 0x1:
return dfu_pmic_read(offset, buf, len);
}
+
+ if (CONFIG_IS_ENABLED(CMD_STM32PROG) &&
+ dfu->data.virt.dev_num >= STM32PROG_VIRT_FIRST_DEV_NUM)
+ return stm32prog_read_medium_virt(dfu, offset, buf, len);
+
*len = 0;
return 0;
}
+int dfu_write_medium_virt(struct dfu_entity *dfu, u64 offset,
+ void *buf, long *len)
+{
+ if (CONFIG_IS_ENABLED(CMD_STM32PROG) &&
+ dfu->data.virt.dev_num >= STM32PROG_VIRT_FIRST_DEV_NUM)
+ return stm32prog_write_medium_virt(dfu, offset, buf, len);
+
+ return -EOPNOTSUPP;
+}
+
int __weak dfu_get_medium_size_virt(struct dfu_entity *dfu, u64 *size)
{
+ if (CONFIG_IS_ENABLED(CMD_STM32PROG) &&
+ dfu->data.virt.dev_num >= STM32PROG_VIRT_FIRST_DEV_NUM)
+ return stm32prog_get_medium_size_virt(dfu, size);
+
*size = SZ_1K;
return 0;
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL=y
CONFIG_TARGET_ST_STM32MP15x=y
+CONFIG_CMD_STM32PROG=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_STM32_ADC=y
CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
CONFIG_DFU_MTD=y
-CONFIG_DFU_VIRT=y
CONFIG_SET_DFU_ALT_INFO=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
CONFIG_ENV_OFFSET=0x280000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_TARGET_ST_STM32MP15x=y
+CONFIG_CMD_STM32PROG=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_STM32_ADC=y
CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
CONFIG_DFU_MTD=y
-CONFIG_DFU_VIRT=y
CONFIG_SET_DFU_ALT_INFO=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
projects / u-boot.git / commitdiff