ARM: CPU: arm926ejs: Consolidate cache routines to common file

Four different boards had different options for enabling cache
that were virtually all the same.  This consolidates these
common functions into arch/arm/cpu/arm926ejs/cache.c

This also has the positive side-effect of enabling cache on
the Davinci (da850) boards.

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Add mach-at91 to the list of consolidations]
Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/arch/arm/cpu/arm926ejs/cache.c b/arch/arm/cpu/arm926ejs/cache.c
index 3b89391c37c8ff302c5de1f5c525bb788325cc4c..22a55f52e0176914135e14a355dbaa107568c322 100644 (file)
--- a/arch/arm/cpu/arm926ejs/cache.c
+++ b/arch/arm/cpu/arm926ejs/cache.c
@@ -65,3 +65,26 @@ __weak void l2_cache_disable(void) {}
 #if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
 __weak void invalidate_l2_cache(void) {}
 #endif
+
+#ifndef CONFIG_SYS_ICACHE_OFF
+/* Invalidate entire I-cache and branch predictor array */
+void invalidate_icache_all(void)
+{
+       unsigned long i = 0;
+
+       asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (i));
+}
+#else
+void invalidate_icache_all(void) {}
+#endif
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_ICACHE_OFF
+       icache_enable();
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+       dcache_enable();
+#endif
+}
+

diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c
index e6eef36c0e0c4ba6d1f988eb4a69bb92a80886c0..2795a5f22eada842482f903bd7566b985fcf1ce0 100644 (file)
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -214,14 +214,6 @@ int print_cpuinfo(void)
 }
 #endif
 
-void enable_caches(void)
-{
-#ifndef CONFIG_SYS_DCACHE_OFF
-       /* Enable D-cache. I-cache is already enabled in start.S */
-       dcache_enable();
-#endif
-}
-
 #if defined(CONFIG_FEC_MXC)
 /*
  * Initializes on-chip ethernet controllers.

diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c
index a593283438e3f73c8090d5302cd5beed5e4acd63..08b1b4de71779fd5f5cefc98f52a8d5911e4fef1 100644 (file)
--- a/arch/arm/cpu/arm926ejs/mx27/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx27/generic.c
@@ -374,11 +374,3 @@ void mx27_sd2_init_pins(void)
 
 }
 #endif /* CONFIG_MMC_MXC */
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
-       /* Enable D-cache. I-cache is already enabled in start.S */
-       dcache_enable();
-}
-#endif /* CONFIG_SYS_DCACHE_OFF */

diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c
index f42f311cbcfbe3452316827f93c7cfa1bc772fec..85c65dcb449de077beba7f9fa5a56f7d2217b0fb 100644 (file)
--- a/arch/arm/cpu/arm926ejs/mxs/mxs.c
+++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c
@@ -49,16 +49,6 @@ void reset_cpu(ulong ignored)
                ;
 }
 
-void enable_caches(void)
-{
-#ifndef CONFIG_SYS_ICACHE_OFF
-       icache_enable();
-#endif
-#ifndef CONFIG_SYS_DCACHE_OFF
-       dcache_enable();
-#endif
-}
-
 /*
  * This function will craft a jumptable at 0x0 which will redirect interrupt
  * vectoring to proper location of U-Boot in RAM.

diff --git a/arch/arm/cpu/arm926ejs/spear/cpu.c b/arch/arm/cpu/arm926ejs/spear/cpu.c
index 0970aca2efd1a4fd9c662b474fd43e30b3d1cff4..e852a888810a3a05d83609d64418127480313fb7 100644 (file)
--- a/arch/arm/cpu/arm926ejs/spear/cpu.c
+++ b/arch/arm/cpu/arm926ejs/spear/cpu.c
@@ -55,16 +55,6 @@ int arch_cpu_init(void)
        return 0;
 }
 
-void enable_caches(void)
-{
-#ifndef CONFIG_SYS_ICACHE_OFF
-       icache_enable();
-#endif
-#ifndef CONFIG_SYS_DCACHE_OFF
-       dcache_enable();
-#endif
-}
-
 #ifdef CONFIG_DISPLAY_CPUINFO
 int print_cpuinfo(void)
 {

diff --git a/arch/arm/mach-at91/arm926ejs/Makefile b/arch/arm/mach-at91/arm926ejs/Makefile
index a8a49ca43f1f5668c794afbd026d3f09cb0ab98f..0639d7ea1e7f0ca4593a12f164f8517b7a688c19 100644 (file)
--- a/arch/arm/mach-at91/arm926ejs/Makefile
+++ b/arch/arm/mach-at91/arm926ejs/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_AT91SAM9N12)     += at91sam9n12_devices.o
 obj-$(CONFIG_AT91SAM9X5)       += at91sam9x5_devices.o
 obj-$(CONFIG_AT91_EFLASH)      += eflash.o
 obj-$(CONFIG_AT91_LED) += led.o
-obj-y += cache.o
 obj-y += clock.o
 obj-y += cpu.o
 obj-y  += reset.o

diff --git a/arch/arm/mach-at91/arm926ejs/cache.c b/arch/arm/mach-at91/arm926ejs/cache.c
deleted file mode 100644 (file)
index 024c8f5..0000000
--- a/arch/arm/mach-at91/arm926ejs/cache.c
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2016
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- */
-#include <linux/types.h>
-#include <common.h>
-
-void enable_caches(void)
-{
-#ifndef CONFIG_SYS_ICACHE_OFF
-       icache_enable();
-#endif
-}
-
-#ifndef CONFIG_SYS_ICACHE_OFF
-/* Invalidate entire I-cache and branch predictor array */
-void invalidate_icache_all(void)
-{
-       unsigned long i = 0;
-
-       asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (i));
-}
-#else
-void invalidate_icache_all(void)
-{
-}
-#endif