spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2

Octeon TX2 sets the TB100_EN bit in the config register. We need to use
a fixed 100MHz clock for this as well to work properly.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Suneel Garapati <sgarapati@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/drivers/spi/octeon_spi.c b/drivers/spi/octeon_spi.c
index 83fe6330a128fc26b09c0e3b5a8439cad43a3238..7e88e5580f79340cf1f50dbec2bbd30ce2fe5473 100644 (file)
--- a/drivers/spi/octeon_spi.c
+++ b/drivers/spi/octeon_spi.c
@@ -519,7 +519,10 @@ static int octeon_spi_set_speed(struct udevice *bus, uint max_hz)
        if (max_hz > OCTEON_SPI_MAX_CLOCK_HZ)
                max_hz = OCTEON_SPI_MAX_CLOCK_HZ;
 
-       clk_rate = clk_get_rate(&priv->clk);
+       if (device_is_compatible(bus, "cavium,thunderx-spi"))
+               clk_rate = 100000000;
+       else
+               clk_rate = clk_get_rate(&priv->clk);
        if (IS_ERR_VALUE(clk_rate))
                return -EINVAL;