sunxi: h616: add Tanix TX1 support

The Tanix TX1 is a tiny TV box, featuring the Allwinner H313 SoC with up
to 2GB of DRAM and 16GB of eMMC. There is no SD card or Ethernet port on
this small device, but it can be booted via the USB debug "FEL" mode.
The bootloader could then be written to the eMMC.

Add the defconfig for that board, and add the devicetree file to the
Makefile, for it to be built.
The DRAM parameters were taken from the vendor firmware on the eMMC.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 82d37adae3fff0b84eb3a0d500d6c8611cfe6a86..871cfbbebabd535e711e8b18c42e987b09c52e6d 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -678,6 +678,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \
        sun50i-h6-tanix-tx6.dtb \
        sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_MACH_SUN50I_H616) += \
+       sun50i-h313-tanix-tx1.dtb \
        sun50i-h616-orangepi-zero2.dtb \
        sun50i-h618-orangepi-zero2w.dtb \
        sun50i-h618-orangepi-zero3.dtb \

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 4bcd9b9af7f70f0d3eb28a56ecc757547e4a6ea7..4ad77c75f5e45de3df036365bb38a550231316f5 100644 (file)
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -549,6 +549,12 @@ S: Maintained
 F:     configs/Sunchip_CX-A99_defconfig
 W:     https://linux-sunxi.org/Sunchip_CX-A99
 
+TANIX TX1 BOARD
+M:     Andre Przywara <andre.przywara@arm.com>
+S:     Maintained
+F:     configs/tanix_tx1_defconfig
+W:     https://linux-sunxi.org/Tanix_TX1
+
 TANIX TX6 BOARD
 M:     Jernej Skrabec <jernej.skrabec@siol.net>
 S:     Maintained

diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig
new file mode 100644 (file)
index 0000000..9915fff
--- /dev/null
+++ b/configs/tanix_tx1_defconfig
@@ -0,0 +1,25 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h313-tanix-tx1"
+CONFIG_SPL=y
+CONFIG_DRAM_SUN50I_H616_DX_ODT=0x06060606
+CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0d0d0d0d
+CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1919
+CONFIG_DRAM_SUN50I_H616_ODT_EN=0x9988eeee
+CONFIG_DRAM_SUN50I_H616_TPR6=0x2fb08080
+CONFIG_DRAM_SUN50I_H616_TPR10=0x402f4469
+CONFIG_DRAM_SUN50I_H616_TPR11=0x0e0f0d0d
+CONFIG_DRAM_SUN50I_H616_TPR12=0x11131213
+CONFIG_MACH_SUN50I_H616=y
+CONFIG_SUNXI_DRAM_H616_LPDDR3=y
+CONFIG_R_I2C_ENABLE=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_AXP313_POWER=y
+CONFIG_AXP_DCDC3_VOLT=1200
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y