arm: mvebu: turris_omnia: Fix setting switch CONFIG pins on new board design

It seems that waiting only 10 ms after releasing LAN switch from reset
is not enough for the strapping pins to latch the requested values.
P6_MODE[0] is latched to 0 instead of 1.

Increasing the delay to 50 ms fixes this issue.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
index a7f96e5b773975b824e9d9ad46141b45263510d9..19c5043fcbaaac3f21d20f9a66e179da187424b2 100644 (file)
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -654,7 +654,7 @@ static void initialize_switch(void)
        ctrl[1] = EXT_CTL_nRES_LAN;
        err = omnia_mcu_write(CMD_EXT_CONTROL, ctrl, sizeof(ctrl));
 
-       mdelay(10);
+       mdelay(50);
 
        /* Change RGMII pins back to RGMII mode */