configs: j7200_evm_r5: Enable raw access power management features

Sysfw is not going to provide access to power management features in the
new architecture, so SPL must implement these itself. Enable all the raw
register access based clock + power domain drivers.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>

diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
index 08fad3e04b18adb8108ef64afde212ba78d8ea5e..5c51bd5ae71e5614e12658fe3df50ab1f737f8e9 100644 (file)
--- a/configs/j7200_evm_r5_defconfig
+++ b/configs/j7200_evm_r5_defconfig
@@ -75,7 +75,7 @@ CONFIG_SPL_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
-CONFIG_CLK_TI_SCI=y
+# CONFIG_CLK_TI_SCI is not set
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
@@ -110,7 +110,7 @@ CONFIG_SPL_PINCTRL=y
 # CONFIG_SPL_PINCTRL_GENERIC is not set
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_POWER_DOMAIN=y
-CONFIG_TI_SCI_POWER_DOMAIN=y
+# CONFIG_TI_SCI_POWER_DOMAIN is not set
 CONFIG_K3_SYSTEM_CONTROLLER=y
 CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_DM_RESET=y
@@ -142,3 +142,13 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6164
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_FS_EXT4=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_TI_K3=y
+CONFIG_TI_POWER_DOMAIN=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_LIB_RATIONAL=y
+CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_SPL_CLK_K3_PLL=y
+CONFIG_SPL_CLK_K3=y
+CONFIG_K3_DM_FW=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y