mx7dsabresd: Boot in non secure by default

Booting a mainline kernel in secure mode on i.MX7D causes only
one CPU to be brought up.

Change it to booting in non secure mode by default, which
allows the two CPUs to be brought up.

It does have a side effect of not probing the CAAM driver.
If CAAM driver is needed then a secure world OS such as OPTEE needs
to be used.

Signed-off-by: Fabio Estevam <festevam@gmail.com>

diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig
index 02f1d2a115671bd1baf7ab89285a13e54d7deedf..e948091a920155b66ac624f62408b21dfd5562cf 100644 (file)
--- a/configs/mx7dsabresd_defconfig
+++ b/configs/mx7dsabresd_defconfig
@@ -6,7 +6,6 @@ CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DM_GPIO=y
 CONFIG_TARGET_MX7DSABRESD=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
 # CONFIG_ARMV7_VIRT is not set
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y

diff --git a/configs/mx7dsabresd_qspi_defconfig b/configs/mx7dsabresd_qspi_defconfig
index 9d6a598c99150e5355e3ecdda6b09c39dfdc317f..23a1c458378042acac30164592261f6f970d6d8d 100644 (file)
--- a/configs/mx7dsabresd_qspi_defconfig
+++ b/configs/mx7dsabresd_qspi_defconfig
@@ -6,7 +6,6 @@ CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DM_GPIO=y
 CONFIG_TARGET_MX7DSABRESD=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
 # CONFIG_ARMV7_VIRT is not set
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y