doc: fix references to distro documentation

Commit 37c5195dfcd157 ("doc: Move distro boot doc to rST") renamed
doc/README.distro to doc/develop/distro.rst.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

diff --git a/doc/README.gpt b/doc/README.gpt
index cc2a1b7ac78a5c65098b5c77f528b3a8ee8efc60..386ac2e0fc8fb37db5d278fdab73fa36ac17c8bc 100644 (file)
--- a/doc/README.gpt
+++ b/doc/README.gpt
@@ -177,7 +177,7 @@ To restore GUID partition table one needs to:
      "name=u-boot,size=60MiB;name=boot,size=60Mib,bootable;name=rootfs,size=0"
    It can be used to locate bootable disks with command
    "part list <interface> <dev> -bootable <varname>",
-   please check out doc/README.distro for use.
+   please check out doc/develop/distro.rst for use.
 
 2. Define 'CONFIG_EFI_PARTITION' and 'CONFIG_CMD_GPT'
 

diff --git a/doc/README.uniphier b/doc/README.uniphier
index badfacd66aa5cfbe786a175d35ed1ff03d2edf36..af746f6c316eca6c2fa68fe62440cdea5bed3a99 100644 (file)
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -336,7 +336,7 @@ Deployment for Distro Boot
 --------------------------
 
 UniPhier SoC family boot the kernel in a generic manner as described in
-doc/README.distro .
+doc/develop/distro.rst.
 
 To boot the kernel, you need to deploy necesssary components to a file
 system on one of your block devices (eMMC, NAND, USB drive, etc.).

diff --git a/doc/board/emulation/qemu-x86.rst b/doc/board/emulation/qemu-x86.rst
index db842f2ece6e86ae515bc63cda7cbaf278093a96..e7dd4e994d38f9d690769bd90fdf438ae6a3e812 100644 (file)
--- a/doc/board/emulation/qemu-x86.rst
+++ b/doc/board/emulation/qemu-x86.rst
@@ -57,7 +57,8 @@ to instantiate. Note, the maximum supported CPU number in QEMU is 255.
 U-Boot uses 'distro_bootcmd' by default when booting on x86 QEMU. This tries to
 load a boot script, kernel, and ramdisk from several different interfaces. For
 the default boot order, see 'qemu-x86.h'. For more information, see
-'README.distro'. Most Linux distros can be booted by writing a uboot script.
+'doc/develop/distro.rst'. Most Linux distros can be booted by writing a uboot
+script.
 For example, Debian (stretch) can be booted by creating a script file named
 'boot.txt' with the contents::
 

diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst
index 9780ac9768cfdc49dc18f46e9e9eb358e200b724..3f70634d2836c0cc815a9fbce2cb062c111780d6 100644 (file)
--- a/doc/board/st/stm32mp1.rst
+++ b/doc/board/st/stm32mp1.rst
@@ -478,7 +478,7 @@ or:
   +-------+--------+---------+------------------------+------------------------+
 
 And the 4th partition (Rootfs) is marked bootable with a file extlinux.conf
-following the Generic Distribution feature (doc/README.distro for use).
+following the Generic Distribution feature (doc/develop/distro.rst for use).
 
 The size of fip or ssbl partition must be enough for the associated binary file,
 4MB and 2MB are default values.

diff --git a/doc/board/tbs/tbs2910.rst b/doc/board/tbs/tbs2910.rst
index e97f2b6e61353da9b547d0d6461ac5535700fbb6..9d4be61783ed2787d354376bd513deb7997f86c5 100644 (file)
--- a/doc/board/tbs/tbs2910.rst
+++ b/doc/board/tbs/tbs2910.rst
@@ -181,7 +181,7 @@ If that fails it will then try to boot from several interfaces using
 'distro_bootcmd': It will first try to boot from the microSD slot, then the
 SD slot, then the internal eMMC, then the SATA interface and finally the USB
 interface. For more information on how to configure your distribution to boot,
-see 'README.distro'.
+see 'doc/develop/distro.rst'.
 
 Links:
 ------