#define GCR_BASE 0x0008
#define GCR_BASE_UPPER 0x000c
#define GCR_REV 0x0030
+#define GCR_L2_CONFIG 0x0130
+#define GCR_L2_TAG_ADDR 0x0600
+#define GCR_L2_TAG_ADDR_UPPER 0x0604
+#define GCR_L2_TAG_STATE 0x0608
+#define GCR_L2_TAG_STATE_UPPER 0x060c
+#define GCR_L2_DATA 0x0610
+#define GCR_L2_DATA_UPPER 0x0614
/* GCR_REV CM versions */
#define GCR_REV_CM3 0x0800
+/* GCR_L2_CONFIG fields */
+#define GCR_L2_CONFIG_ASSOC_SHIFT 0
+#define GCR_L2_CONFIG_ASSOC_BITS 8
+#define GCR_L2_CONFIG_LINESZ_SHIFT 8
+#define GCR_L2_CONFIG_LINESZ_BITS 4
+#define GCR_L2_CONFIG_SETSZ_SHIFT 12
+#define GCR_L2_CONFIG_SETSZ_BITS 4
+#define GCR_L2_CONFIG_BYPASS (1 << 20)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/io.h>
+
+static inline void *mips_cm_base(void)
+{
+ return (void *)CKSEG1ADDR(CONFIG_MIPS_CM_BASE);
+}
+
+static inline unsigned long mips_cm_l2_line_size(void)
+{
+ unsigned long l2conf, line_sz;
+
+ l2conf = __raw_readl(mips_cm_base() + GCR_L2_CONFIG);
+
+ line_sz = l2conf >> GCR_L2_CONFIG_LINESZ_SHIFT;
+ line_sz &= GENMASK(GCR_L2_CONFIG_LINESZ_BITS - 1, 0);
+ return line_sz ? (2 << line_sz) : 0;
+}
+
+#endif /* !__ASSEMBLY__ */
+
#endif /* __MIPS_ASM_CM_H__ */
#include <common.h>
#include <asm/cacheops.h>
+#include <asm/cm.h>
#include <asm/mipsregs.h>
DECLARE_GLOBAL_DATA_PTR;
+static void probe_l2(void)
+{
+#ifdef CONFIG_MIPS_L2_CACHE
+ unsigned long conf2, sl;
+ bool l2c = false;
+
+ if (!(read_c0_config1() & MIPS_CONF_M))
+ return;
+
+ conf2 = read_c0_config2();
+
+ if (__mips_isa_rev >= 6) {
+ l2c = conf2 & MIPS_CONF_M;
+ if (l2c)
+ l2c = read_c0_config3() & MIPS_CONF_M;
+ if (l2c)
+ l2c = read_c0_config4() & MIPS_CONF_M;
+ if (l2c)
+ l2c = read_c0_config5() & MIPS_CONF5_L2C;
+ }
+
+ if (l2c && config_enabled(CONFIG_MIPS_CM)) {
+ gd->arch.l2_line_size = mips_cm_l2_line_size();
+ } else if (l2c) {
+ /* We don't know how to retrieve L2 config on this system */
+ BUG();
+ } else {
+ sl = (conf2 & MIPS_CONF2_SL) >> MIPS_CONF2_SL_SHF;
+ gd->arch.l2_line_size = sl ? (2 << sl) : 0;
+ }
+#endif
+}
+
void mips_cache_probe(void)
{
#ifdef CONFIG_SYS_CACHE_SIZE_AUTO
gd->arch.l1i_line_size = il ? (2 << il) : 0;
gd->arch.l1d_line_size = dl ? (2 << dl) : 0;
#endif
+ probe_l2();
}
static inline unsigned long icache_line_size(void)
#endif
}
+static inline unsigned long scache_line_size(void)
+{
+#ifdef CONFIG_MIPS_L2_CACHE
+ return gd->arch.l2_line_size;
+#else
+ return 0;
+#endif
+}
+
#define cache_loop(start, end, lsize, ops...) do { \
const void *addr = (const void *)(start & ~(lsize - 1)); \
const void *aend = (const void *)((end - 1) & ~(lsize - 1)); \
{
unsigned long ilsize = icache_line_size();
unsigned long dlsize = dcache_line_size();
+ unsigned long slsize = scache_line_size();
/* aend will be miscalculated when size is zero, so we return here */
if (size == 0)
return;
- if (ilsize == dlsize) {
+ if ((ilsize == dlsize) && !slsize) {
/* flush I-cache & D-cache simultaneously */
cache_loop(start_addr, start_addr + size, ilsize,
HIT_WRITEBACK_INV_D, HIT_INVALIDATE_I);
/* flush D-cache */
cache_loop(start_addr, start_addr + size, dlsize, HIT_WRITEBACK_INV_D);
+ /* flush L2 cache */
+ if (slsize)
+ cache_loop(start_addr, start_addr + size, slsize,
+ HIT_WRITEBACK_INV_SD);
+
/* flush I-cache */
cache_loop(start_addr, start_addr + size, ilsize, HIT_INVALIDATE_I);
}
void flush_dcache_range(ulong start_addr, ulong stop)
{
unsigned long lsize = dcache_line_size();
+ unsigned long slsize = scache_line_size();
/* aend will be miscalculated when size is zero, so we return here */
if (start_addr == stop)
return;
cache_loop(start_addr, stop, lsize, HIT_WRITEBACK_INV_D);
+
+ /* flush L2 cache */
+ if (slsize)
+ cache_loop(start_addr, stop, slsize, HIT_WRITEBACK_INV_SD);
}
void invalidate_dcache_range(ulong start_addr, ulong stop)
{
unsigned long lsize = dcache_line_size();
+ unsigned long slsize = scache_line_size();
/* aend will be miscalculated when size is zero, so we return here */
if (start_addr == stop)
return;
+ /* invalidate L2 cache */
+ if (slsize)
+ cache_loop(start_addr, stop, slsize, HIT_INVALIDATE_SD);
+
cache_loop(start_addr, stop, lsize, HIT_INVALIDATE_D);
}
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/cacheops.h>
+#include <asm/cm.h>
#ifndef CONFIG_SYS_MIPS_CACHE_MODE
#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
* with good parity is available. This routine will initialise an area of
* memory starting at location zero to be used as a source of parity.
*
+ * Note that this function does not follow the standard calling convention &
+ * may clobber typically callee-saved registers.
+ *
* RETURNS: N/A
*
*/
-#define R_IC_SIZE t2
-#define R_IC_LINE t8
-#define R_DC_SIZE t3
-#define R_DC_LINE t9
+#define R_RETURN s0
+#define R_IC_SIZE s1
+#define R_IC_LINE s2
+#define R_DC_SIZE s3
+#define R_DC_LINE s4
+#define R_L2_SIZE s5
+#define R_L2_LINE s6
+#define R_L2_BYPASSED s7
+#define R_L2_L2C t8
LEAF(mips_cache_reset)
+ move R_RETURN, ra
+
+#ifdef CONFIG_MIPS_L2_CACHE
+ /*
+ * For there to be an L2 present, Config2 must be present. If it isn't
+ * then we proceed knowing there's no L2 cache.
+ */
+ move R_L2_SIZE, zero
+ move R_L2_LINE, zero
+ move R_L2_BYPASSED, zero
+ move R_L2_L2C, zero
+ mfc0 t0, CP0_CONFIG, 1
+ bgez t0, l2_probe_done
+
+ /*
+ * From MIPSr6 onwards the L2 cache configuration might not be reported
+ * by Config2. The Config5.L2C bit indicates whether this is the case,
+ * and if it is then we need knowledge of where else to look. For cores
+ * from Imagination Technologies this is a CM GCR.
+ */
+# if __mips_isa_rev >= 6
+ /* Check that Config5 exists */
+ mfc0 t0, CP0_CONFIG, 2
+ bgez t0, l2_probe_cop0
+ mfc0 t0, CP0_CONFIG, 3
+ bgez t0, l2_probe_cop0
+ mfc0 t0, CP0_CONFIG, 4
+ bgez t0, l2_probe_cop0
+
+ /* Check Config5.L2C is set */
+ mfc0 t0, CP0_CONFIG, 5
+ and R_L2_L2C, t0, MIPS_CONF5_L2C
+ beqz R_L2_L2C, l2_probe_cop0
+
+ /* Config5.L2C is set */
+# ifdef CONFIG_MIPS_CM
+ /* The CM will provide L2 configuration */
+ PTR_LI t0, CKSEG1ADDR(CONFIG_MIPS_CM_BASE)
+ lw t1, GCR_L2_CONFIG(t0)
+ bgez t1, l2_probe_done
+
+ ext R_L2_LINE, t1, \
+ GCR_L2_CONFIG_LINESZ_SHIFT, GCR_L2_CONFIG_LINESZ_BITS
+ beqz R_L2_LINE, l2_probe_done
+ li t2, 2
+ sllv R_L2_LINE, t2, R_L2_LINE
+
+ ext t2, t1, GCR_L2_CONFIG_ASSOC_SHIFT, GCR_L2_CONFIG_ASSOC_BITS
+ addiu t2, t2, 1
+ mul R_L2_SIZE, R_L2_LINE, t2
+
+ ext t2, t1, GCR_L2_CONFIG_SETSZ_SHIFT, GCR_L2_CONFIG_SETSZ_BITS
+ sllv R_L2_SIZE, R_L2_SIZE, t2
+ li t2, 64
+ mul R_L2_SIZE, R_L2_SIZE, t2
+
+ /* Bypass the L2 cache so that we can init the L1s early */
+ or t1, t1, GCR_L2_CONFIG_BYPASS
+ sw t1, GCR_L2_CONFIG(t0)
+ sync
+ li R_L2_BYPASSED, 1
+
+ /* Zero the L2 tag registers */
+ sw zero, GCR_L2_TAG_ADDR(t0)
+ sw zero, GCR_L2_TAG_ADDR_UPPER(t0)
+ sw zero, GCR_L2_TAG_STATE(t0)
+ sw zero, GCR_L2_TAG_STATE_UPPER(t0)
+ sw zero, GCR_L2_DATA(t0)
+ sw zero, GCR_L2_DATA_UPPER(t0)
+ sync
+# else
+ /* We don't know how to retrieve L2 configuration on this system */
+# endif
+ b l2_probe_done
+# endif
+
+ /*
+ * For pre-r6 systems, or r6 systems with Config5.L2C==0, probe the L2
+ * cache configuration from the cop0 Config2 register.
+ */
+l2_probe_cop0:
+ mfc0 t0, CP0_CONFIG, 2
+
+ srl R_L2_LINE, t0, MIPS_CONF2_SL_SHF
+ andi R_L2_LINE, R_L2_LINE, MIPS_CONF2_SL >> MIPS_CONF2_SL_SHF
+ beqz R_L2_LINE, l2_probe_done
+ li t1, 2
+ sllv R_L2_LINE, t1, R_L2_LINE
+
+ srl t1, t0, MIPS_CONF2_SA_SHF
+ andi t1, t1, MIPS_CONF2_SA >> MIPS_CONF2_SA_SHF
+ addiu t1, t1, 1
+ mul R_L2_SIZE, R_L2_LINE, t1
+
+ srl t1, t0, MIPS_CONF2_SS_SHF
+ andi t1, t1, MIPS_CONF2_SS >> MIPS_CONF2_SS_SHF
+ sllv R_L2_SIZE, R_L2_SIZE, t1
+ li t1, 64
+ mul R_L2_SIZE, R_L2_SIZE, t1
+
+ /* Attempt to bypass the L2 so that we can init the L1s early */
+ or t0, t0, MIPS_CONF2_L2B
+ mtc0 t0, CP0_CONFIG, 2
+ ehb
+ mfc0 t0, CP0_CONFIG, 2
+ and R_L2_BYPASSED, t0, MIPS_CONF2_L2B
+
+ /* Zero the L2 tag registers */
+ mtc0 zero, CP0_TAGLO, 4
+ ehb
+l2_probe_done:
+#endif
+
#ifndef CONFIG_SYS_CACHE_SIZE_AUTO
li R_IC_SIZE, CONFIG_SYS_ICACHE_SIZE
li R_IC_LINE, CONFIG_SYS_ICACHE_LINE_SIZE
#endif /* CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD */
+#ifdef CONFIG_MIPS_L2_CACHE
+ /*
+ * If the L2 is bypassed, init the L1 first so that we can execute the
+ * rest of the cache initialisation using the L1 instruction cache.
+ */
+ bnez R_L2_BYPASSED, l1_init
+
+l2_init:
+ PTR_LI t0, INDEX_BASE
+ PTR_ADDU t1, t0, R_L2_SIZE
+1: cache INDEX_STORE_TAG_SD, 0(t0)
+ PTR_ADDU t0, t0, R_L2_LINE
+ bne t0, t1, 1b
+
+ /*
+ * If the L2 was bypassed then we already initialised the L1s before
+ * the L2, so we are now done.
+ */
+ bnez R_L2_BYPASSED, l2_unbypass
+#endif
+
/*
* The TagLo registers used depend upon the CPU implementation, but the
* architecture requires that it is safe for software to write to both
* TagLo selects 0 & 2 covering supported cases.
*/
+l1_init:
mtc0 zero, CP0_TAGLO
mtc0 zero, CP0_TAGLO, 2
PTR_LI t0, INDEX_BASE
cache_loop t0, t1, R_DC_LINE, INDEX_STORE_TAG_D
#endif
+3:
+
+#ifdef CONFIG_MIPS_L2_CACHE
+ /* If the L2 isn't bypassed then we're done */
+ beqz R_L2_BYPASSED, return
+
+ /* The L2 is bypassed - go initialise it */
+ b l2_init
+
+l2_unbypass:
+# if __mips_isa_rev >= 6
+ beqz R_L2_L2C, 1f
+
+ li t0, CKSEG1ADDR(CONFIG_MIPS_CM_BASE)
+ lw t1, GCR_L2_CONFIG(t0)
+ xor t1, t1, GCR_L2_CONFIG_BYPASS
+ sw t1, GCR_L2_CONFIG(t0)
+ sync
+ ehb
+ b 2f
+# endif
+1: mfc0 t0, CP0_CONFIG, 2
+ xor t0, t0, MIPS_CONF2_L2B
+ mtc0 t0, CP0_CONFIG, 2
+ ehb
+
+2:
+#endif
-3: jr ra
+return:
+ jr ra
END(mips_cache_reset)
/*
projects / u-boot.git / commitdiff