ARM: dts: sam9x60_curiosity: Add pinctrl and gpio properties for USB

Add the required pinctrl and gpio properties needed by the USB DT nodes
of the sam9x60_curiosity boards.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>

diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts b/arch/arm/dts/at91-sam9x60_curiosity.dts
index 7c5b6ae2b87ae7d91d4381c1c6849794844e0af8..d6ae3d648daf92a3173a89f74d8c81c42b6dd88c 100644 (file)
--- a/arch/arm/dts/at91-sam9x60_curiosity.dts
+++ b/arch/arm/dts/at91-sam9x60_curiosity.dts
@@ -49,6 +49,13 @@
                                                atmel,pins =
                                                        <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
                                        };
+
+                                       usb1 {
+                                               pinctrl_usb_default: usb_default {
+                                                       atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+                                                                       AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                               };
+                                       };
                        };
                };
        };
@@ -89,3 +96,17 @@
        phy-mode = "rmii";
        status = "okay";
 };
+
+&usb1 {
+       num-ports = <3>;
+       atmel,vbus-gpio = <0
+                          &pioD 15 GPIO_ACTIVE_HIGH
+                          &pioD 18 GPIO_ACTIVE_HIGH>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb_default>;
+       status = "okay";
+};
+
+&usb2 {
+       status = "okay";
+};