armv8: ls1028aqds: add some environments

Add sd and emmc bootcmd environments to facilitate
the boot process.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 977c5da448585964ef1a311b95da502f946f237f..818b994b907cd36d46d6de117538fda08a7d92be 100644 (file)
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -99,6 +99,7 @@
        "load_addr=0xa0000000\0" \
        "kernel_addr_r=0x81000000\0" \
        "fdt_addr_r=0x90000000\0" \
+       "fdt2_addr_r=0x90010000\0" \
        "ramdisk_addr_r=0xa0000000\0" \
        "kernel_start=0x1000000\0" \
        "kernelheader_start=0x600000\0" \
@@ -139,19 +140,35 @@
                        "${scripthdraddr} ${prefix}${boot_script_hdr} " \
                        "&& esbc_validate ${scripthdraddr};" \
                "source ${scriptaddr}\0" \
-       "sd_bootcmd=echo Trying load from SD ..;" \
-               "mmcinfo; mmc read $load_addr " \
-               "$kernel_addr_sd $kernel_size_sd && " \
+       "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+               "sf probe 0:0 && sf read $load_addr " \
+               "$kernel_start $kernel_size ; env exists secureboot &&" \
+               "sf read $kernelheader_addr_r $kernelheader_start " \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+               " bootm $load_addr#$board\0" \
+       "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+               "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+               "&& hdp load $load_addr 0x2000\0"                       \
+       "sd_bootcmd=echo Trying load from SD ...;" \
+               "mmc dev 0; mmcinfo; mmc read $load_addr "              \
+               "$kernel_addr_sd $kernel_size_sd && "   \
                "env exists secureboot && mmc read $kernelheader_addr_r " \
-               "$kernelhdr_addr_sd $kernelhdr_size_sd " \
-               " && esbc_validate ${kernelheader_addr_r};" \
-               "bootm $load_addr#$board\0" \
-       "emmc_bootcmd=echo Trying load from EMMC ..;" \
-               "mmcinfo; mmc dev 1; mmc read $load_addr " \
-               "$kernel_addr_sd $kernel_size_sd && " \
+               "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
+               " && esbc_validate ${kernelheader_addr_r};"     \
+               "bootm $load_addr#$board\0"             \
+       "sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
+               "mmc dev 0;mmcinfo; mmc read $load_addr 0x4a00 0x200 "  \
+               "&& hdp load $load_addr 0x2000\0"       \
+       "emmc_bootcmd=echo Trying load from EMMC ..;"   \
+               "mmc dev 1; mmcinfo; mmc read $load_addr "              \
+               "$kernel_addr_sd $kernel_size_sd && "   \
                "env exists secureboot && mmc read $kernelheader_addr_r " \
-               "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+               "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
                " && esbc_validate ${kernelheader_addr_r};"     \
-               "bootm $load_addr#$board\0"
+               "bootm $load_addr#$board\0"                     \
+       "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+               "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "   \
+               "&& hdp load $load_addr 0x2000\0"
+
 #endif
 #endif /* __LS1028A_QDS_H */