configs: arbel_evb: change env offset and boot address

Change env offset and boot address for new design.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

diff --git a/configs/arbel_evb_defconfig b/configs/arbel_evb_defconfig
index 08753aebc0094c2da6f1e8d337f97a44c2489344..9983d3a58b2fd80450df18a5793e281ca62bf23d 100644 (file)
--- a/configs/arbel_evb_defconfig
+++ b/configs/arbel_evb_defconfig
@@ -7,7 +7,7 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x06208000
 CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_OFFSET=0x3C0000
+CONFIG_ENV_OFFSET=0x7C0000
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="nuvoton-npcm845-evb"
@@ -17,7 +17,7 @@ CONFIG_ARCH_NPCM8XX=y
 CONFIG_SYS_SKIP_UART_INIT=y
 CONFIG_TARGET_ARBEL_EVB=y
 CONFIG_SYS_LOAD_ADDR=0x06208000
-CONFIG_ENV_ADDR=0x803C0000
+CONFIG_ENV_ADDR=0x807C0000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_BOOTM_LEN=0x1400000

diff --git a/include/configs/arbel.h b/include/configs/arbel.h
index 61f6a5e2438d3f281f89a234e9ca0e212a00dad0..b5f684e88fe093f4b2724b295d0adc026eca0626 100644 (file)
--- a/include/configs/arbel.h
+++ b/include/configs/arbel.h
@@ -16,7 +16,7 @@
        { 9600, 14400, 19200, 38400, 57600, 115200, 230400, 380400, 460800, 921600 }
 
 /* Default environemnt variables */
-#define CFG_EXTRA_ENV_SETTINGS   "uimage_flash_addr=80400000\0"   \
+#define CFG_EXTRA_ENV_SETTINGS   "uimage_flash_addr=80800000\0"   \
                "stdin=serial\0"   \
                "stdout=serial\0"   \
                "stderr=serial\0"    \