powerpc: Remove ARCH= references from documentation

When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

Cc: Po Liu <po.liu@nxp.com>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README
index 2e249cbb3a2e881b3e154a63abf2cede6bebc39b..a6120f1845d2a7af90e5b61d679df246dfc9951a 100644 (file)
--- a/board/freescale/c29xpcie/README
+++ b/board/freescale/c29xpcie/README
@@ -56,7 +56,6 @@ Note: 1 stands for 'off', 0 stands for 'on'
 Build and program U-Boot to NOR flash
 ==================================
 1. Build u-boot.bin image example:
-       export ARCH=powerpc
        export CROSS_COMPILE=/your_path/powerpc-linux-gnu-
        make C293PCIE
 

diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index 105942f7a54f40b92674d481b6c7327d34ac4710..46c61237c72790f11498e5039c4853d9ac71038a 100644 (file)
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -98,7 +98,6 @@ instead of to CAN/UART1.
 Build and burn U-Boot to NOR flash
 ==================================
 1. Build u-boot.bin image
-       export ARCH=powerpc
        export CROSS_COMPILE=/your_path/powerpc-linux-gnu-
        make P1010RDB_NOR
 

diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB
index dc82f0df09845f140f052b19a1161baaaed8f44d..4a3b389877fca81b35a6949b7b57e12fb9eab2ff 100644 (file)
--- a/board/freescale/p1010rdb/README.P1010RDB-PB
+++ b/board/freescale/p1010rdb/README.P1010RDB-PB
@@ -128,7 +128,6 @@ To enable IFC in case of SD boot
 Build images for different boot mode
 ====================================
 First setup cross compile environment on build host
-   $ export ARCH=powerpc
    $ export CROSS_COMPILE=<your-compiler-path>/powerpc-linux-gnu-
 
 1. For NOR boot