menu "Device access commands"
+config CMD_ARMFLASH
+ #depends on FLASH_CFI_DRIVER
+ bool "armflash"
+ help
+ ARM Ltd reference designs flash partition access
+
config CMD_CLK
bool "clk - Show clock frequencies"
help
clock values from associated drivers. However currently no command
exists for this.
+config CMD_DEMO
+ bool "demo - Demonstration commands for driver model"
+ depends on DM
+ help
+ Provides a 'demo' command which can be used to play around with
+ driver model. To use this properly you will need to enable one or
+ both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+ Otherwise you will always get an empty list of devices. The demo
+ devices are defined in the sandbox device tree, so the easiest
+ option is to use sandbox and pass the -d point to sandbox's
+ u-boot.dtb file.
+
+config CMD_DFU
+ bool "dfu"
+ select USB_FUNCTION_DFU
+ help
+ Enables the command "dfu" which is used to have U-Boot create a DFU
+ class device via USB.
+
config CMD_DM
bool "dm - Access to driver model information"
depends on DM
can be useful to see the state of driver model for debugging or
interest.
-config CMD_DEMO
- bool "demo - Demonstration commands for driver model"
- depends on DM
+config CMD_FDC
+ bool "fdcboot - Boot from floppy device"
help
- Provides a 'demo' command which can be used to play around with
- driver model. To use this properly you will need to enable one or
- both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
- Otherwise you will always get an empty list of devices. The demo
- devices are defined in the sandbox device tree, so the easiest
- option is to use sandbox and pass the -d point to sandbox's
- u-boot.dtb file.
+ The 'fdtboot' command allows booting an image from a floppy disk.
+
+config CMD_FLASH
+ bool "flinfo, erase, protect"
+ default y
+ help
+ NOR flash support.
+ flinfo - print FLASH memory information
+ erase - FLASH memory
+ protect - enable or disable FLASH write protection
+
+config CMD_FPGA
+ bool "fpga"
+ default y
+ help
+ FPGA support.
+
+config CMD_FPGA_LOADBP
+ bool "fpga loadbp - load partial bitstream (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGA_LOADFS
+ bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a FAT filesystem.
+
+config CMD_FPGA_LOADMK
+ bool "fpga loadmk - load bitstream from image"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a image generated by mkimage.
+
+config CMD_FPGA_LOADP
+ bool "fpga loadp - load partial bitstream"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGAD
+ bool "fpgad - dump FPGA registers"
+ help
+ (legacy, needs conversion to driver model)
+ Provides a way to dump FPGA registers by calling the board-specific
+ fpga_get_reg() function. This functions similarly to the 'md'
+ command.
+
+config CMD_FUSE
+ bool "fuse - support for the fuse subssystem"
+ help
+ (deprecated - needs conversion to driver model)
+ This allows reading, sensing, programming or overriding fuses
+ which control the behaviour of the device. The command uses the
+ fuse_...() API.
+
+config CMD_GPIO
+ bool "gpio"
+ help
+ GPIO support.
+
+config CMD_GPT
+ bool "GPT (GUID Partition Table) command"
+ select PARTITION_UUIDS
+ select EFI_PARTITION
+ help
+ Enable the 'gpt' command to ready and write GPT style partition
+ tables.
+
+config CMD_GPT_RENAME
+ bool "GPT partition renaming commands"
+ depends on CMD_GPT
+ help
+ Enables the 'gpt' command to interchange names on two GPT
+ partitions via the 'gpt swap' command or to rename single
+ partitions via the 'rename' command.
config CMD_IDE
bool "ide - Support for IDE drivers"
might be useful to enhance tracing to only checksum the accesses and
not the data read/written.
+config CMD_I2C
+ bool "i2c"
+ help
+ I2C support.
+
config CMD_LOADB
bool "loadb"
default y
help
Load an S-Record file over serial line
-config CMD_FLASH
- bool "flinfo, erase, protect"
- default y
- help
- NOR flash support.
- flinfo - print FLASH memory information
- erase - FLASH memory
- protect - enable or disable FLASH write protection
-
-config CMD_GPT
- bool "GPT (GUID Partition Table) command"
- select PARTITION_UUIDS
- select EFI_PARTITION
- help
- Enable the 'gpt' command to ready and write GPT style partition
- tables.
-
-config CMD_GPT_RENAME
- bool "GPT partition renaming commands"
- depends on CMD_GPT
- help
- Enables the 'gpt' command to interchange names on two GPT
- partitions via the 'gpt swap' command or to rename single
- partitions via the 'rename' command.
-
-config CMD_ARMFLASH
- #depends on FLASH_CFI_DRIVER
- bool "armflash"
- help
- ARM Ltd reference designs flash partition access
-
config CMD_MMC
bool "mmc"
help
Read and display information about the partition table on
various media.
+config CMD_REMOTEPROC
+ bool "remoteproc"
+ depends on REMOTEPROC
+ help
+ Support for Remote Processor control
+
+config CMD_SATA
+ bool "sata - Access SATA subsystem"
+ select SATA
+ help
+ SATA (Serial Advanced Technology Attachment) is a serial bus
+ standard for connecting to hard drives and other storage devices.
+ This command provides information about attached devices and allows
+ reading, writing and other operations.
+
+ SATA replaces PATA (originally just ATA), which stands for Parallel AT
+ Attachment, where AT refers to an IBM AT (Advanced Technology)
+ computer released in 1984.
+
config CMD_SF
bool "sf"
help
help
SPI utility command.
-config CMD_I2C
- bool "i2c"
- help
- I2C support.
-
config CMD_USB
bool "usb"
help
USB support.
-config CMD_DFU
- bool "dfu"
- select USB_FUNCTION_DFU
- help
- Enables the command "dfu" which is used to have U-Boot create a DFU
- class device via USB.
-
config CMD_USB_MASS_STORAGE
bool "UMS usb mass storage"
help
USB mass storage support
-config CMD_FPGA
- bool "fpga"
- default y
- help
- FPGA support.
-
-config CMD_FPGA_LOADBP
- bool "fpga loadbp - load partial bitstream (Xilinx only)"
- depends on CMD_FPGA
- help
- Supports loading an FPGA device from a bitstream buffer containing
- a partial bitstream.
-
-config CMD_FPGA_LOADFS
- bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
- depends on CMD_FPGA
- help
- Supports loading an FPGA device from a FAT filesystem.
-
-config CMD_FPGA_LOADMK
- bool "fpga loadmk - load bitstream from image"
- depends on CMD_FPGA
- help
- Supports loading an FPGA device from a image generated by mkimage.
-
-config CMD_FPGA_LOADP
- bool "fpga loadp - load partial bitstream"
- depends on CMD_FPGA
- help
- Supports loading an FPGA device from a bitstream buffer containing
- a partial bitstream.
-
-config CMD_FPGAD
- bool "fpgad - dump FPGA registers"
- help
- (legacy, needs conversion to driver model)
- Provides a way to dump FPGA registers by calling the board-specific
- fpga_get_reg() function. This functions similarly to the 'md'
- command.
-
-config CMD_FUSE
- bool "fuse - support for the fuse subssystem"
- help
- (deprecated - needs conversion to driver model)
- This allows reading, sensing, programming or overriding fuses
- which control the behaviour of the device. The command uses the
- fuse_...() API.
-
-config CMD_REMOTEPROC
- bool "remoteproc"
- depends on REMOTEPROC
- help
- Support for Remote Processor control
-
-config CMD_GPIO
- bool "gpio"
- help
- GPIO support.
-
-config CMD_FDC
- bool "fdcboot - Boot from floppy device"
- help
- The 'fdtboot' command allows booting an image from a floppy disk.
-
-config CMD_SATA
- bool "sata - Access SATA subsystem"
- select SATA
- help
- SATA (Serial Advanced Technology Attachment) is a serial bus
- standard for connecting to hard drives and other storage devices.
- This command provides information about attached devices and allows
- reading, writing and other operations.
-
- SATA replaces PATA (originally just ATA), which stands for Parallel AT
- Attachment, where AT refers to an IBM AT (Advanced Technology)
- computer released in 1984.
-
endmenu
projects / u-boot.git / commitdiff