From fbf043d7e637378354fdc47369b0f48682d766a3 Mon Sep 17 00:00:00 2001
From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Date: Thu, 18 Feb 2021 00:50:21 -0700
Subject: [PATCH] arm64: zynqmp: Update device tree properties for nand flash
Update the following device tree properties for nand flash
- Set software ecc mode.
- Set bch as ecc algo.
- Set read block to 0.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index 92d938d665..3204456e64 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -124,6 +124,10 @@
reg = <0x0>;
#address-cells = <0x2>;
#size-cells = <0x1>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "bch";
+ nand-rb = <0>;
+ label = "main-storage-0";
partition@0 { /* for testing purpose */
label = "nand-fsbl-uboot";
@@ -154,6 +158,10 @@
reg = <0x1>;
#address-cells = <0x2>;
#size-cells = <0x1>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "bch";
+ nand-rb = <0>;
+ label = "main-storage-1";
partition@0 { /* for testing purpose */
label = "nand1-fsbl-uboot";
--
2.39.5