Frieder Schrempf [Tue, 20 Feb 2024 09:01:00 +0000 (10:01 +0100)]
board: imx6dl-sielaff: spl.c: Remove multiline string
Remove the malformed multiline string and fix the checkpatch warning.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Jesse Taube [Mon, 19 Feb 2024 23:01:00 +0000 (18:01 -0500)]
imx: imxrt1050-evk: Add documentation for SPI boot
Add documentation for SPI boot.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Jesse Taube [Mon, 19 Feb 2024 23:00:59 +0000 (18:00 -0500)]
imx: imxrt1050-evk: Add support for SPI flash booting
Add support for booting the imxrt1050-evk from spi.
Add imximage config and the ability for SPL to boot from NOR.
Enable binman in Kconfig and device tree for imxrt* as it is used to
prepend fspi_header.bin to SPL and u-boot.img.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Tom Rini [Fri, 23 Feb 2024 17:54:03 +0000 (12:54 -0500)]
Merge tag 'u-boot-amlogic-fixes-
20240223' of https://source.denx.de/u-boot/custodians/u-boot-amlogic
- fix AVB oom error for Khadas VIM3 Android configs
Mattijs Korpershoek [Fri, 9 Feb 2024 08:58:35 +0000 (09:58 +0100)]
configs: khadas-vim3*_android: fix AVB oom error
When booting Android with AVB enabled, an OOM is observed:
=> avb init ${mmcdev}
=> avb verify _a
## Android Verified Boot 2.0 version 1.1.0
read_is_device_unlocked not supported yet
read_rollback_index not supported yet
avb_util.c:182: ERROR: Failed to allocate memory.
OOM error occurred during verification
A custom malloc length of 128MB is required as documented in
commit
285a83b12bdf ("configs: meson64_android: increase SYS_MALLOC_LEN to 128M for AVB")
However, this 128M custom malloc length was not ported to Kconfig in
commit
7cfbba36e9f8 ("Convert CONFIG_SYS_MALLOC_LEN to Kconfig")
Add it back to fix AVB verification on VIM3/VIM3L.
Fixes: 7cfbba36e9f8 ("Convert CONFIG_SYS_MALLOC_LEN to Kconfig")
Co-developed-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Link: https://lore.kernel.org/r/20240209-vim3-avb-malloc-v1-1-91427d8c19ab@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tom Rini [Thu, 22 Feb 2024 16:34:59 +0000 (11:34 -0500)]
Merge branch 'qcom-fixes-2024.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon
- Two fixes for the qcom-pmic button driver
Tom Rini [Tue, 20 Feb 2024 22:57:52 +0000 (17:57 -0500)]
Merge patch series "board/ti: k3 boards: Stop using findfdt"
Nishanth Menon <nm@ti.com> says:
This is a wide cleanup to switch to setting fdtfile using env_set
instead of scripted magic. 'fdtfile' is expected to be set by default.
This allows the stdboot triggered efi loaders to find the correct OS
device tree file even if regular boot process is interrupted by user
intervention.
Nishanth Menon [Mon, 12 Feb 2024 19:47:26 +0000 (13:47 -0600)]
include: env: ti: Drop default_findfdt
We shouldn't need finfdt anymore. Drop the env script.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:25 +0000 (13:47 -0600)]
board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script
Stop using the findfdt script and switch to setting the fdtfile from C
code.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:24 +0000 (13:47 -0600)]
board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script
Stop using the findfdt script and switch to setting the fdtfile from C
code.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:23 +0000 (13:47 -0600)]
board: ti: j721s2: Set fdtfile from C code instead of findfdt script
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no
longer needed.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:22 +0000 (13:47 -0600)]
board: ti: j721e: Set fdtfile from C code instead of findfdt script
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no
longer needed.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:21 +0000 (13:47 -0600)]
board: ti: am65x: Set fdtfile from C code instead of findfdt script
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no
longer needed.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:20 +0000 (13:47 -0600)]
board: ti: am64x: Set fdtfile from C code instead of findfdt script
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no
longer needed.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:19 +0000 (13:47 -0600)]
board: ti: am62x: Set fdtfile from C code instead of findfdt script
Stop using the findfdt script and switch to setting the fdtfile from
C code.
While at this, replace findfdt in environment with a warning as it is
no longer needed
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:18 +0000 (13:47 -0600)]
board: ti: am62ax: Set fdtfile from C code instead of findfdt script
Stop using the findfdt script and switch to setting the fdtfile from
C code.
While at this, replace findfdt in environment with a warning as it is
no longer needed
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:17 +0000 (13:47 -0600)]
board: ti: common: Introduce a common fdt ops library
Introduce a common fdt operations library for basic device tree
operations that are common between various boards.
The first library to introduce here is the capability to set up
fdtfile as a standard variable as part of board identification rather
than depend on scripted ifdeffery.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Mon, 12 Feb 2024 19:47:16 +0000 (13:47 -0600)]
board: ti: Add missing common/Kconfig references
Add missing board/ti/common/Kconfig references for the platforms that
missed it. The intent is for the common Kconfig to be usable across TI
reference boards as required.
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tom Rini [Tue, 20 Feb 2024 13:03:21 +0000 (08:03 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb
Tom Rini [Tue, 20 Feb 2024 13:02:49 +0000 (08:02 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-samsung
Mathieu Othacehe [Mon, 19 Feb 2024 17:05:31 +0000 (18:05 +0100)]
usb: ehci-mx6: Add i.MX93 support
i.MX93 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6
driver.
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Shantur Rathore [Wed, 14 Feb 2024 09:54:03 +0000 (09:54 +0000)]
common: usb-hub: Reset USB 3.0 hubs only
Additional testing of the changes introduced in commit
33e06dcbe57a "common:
usb-hub: Reset hub port before scanning") revealed that some USB 2.0 and 3.0
flash drives didn't work in U-Boot on some Allwinner SoCs that support USB
2.0 interfaces only. More precisely, some of the tested USB 2.0 and 3.0
flash drives failed to be detected and work on an OrangePi Zero 3, based on
the Allwinner H616 SoC that supports USB 2.0 only, while the same USB flash
drives worked just fine on a Pine64 H64, based on the Allwinner H6 SoC that
supports both USB 2.0 and USB 3.0 interfaces.
The USB ID of the above-mentioned USB 3.0 flash drive that failed to work is
1f75:0917 (Innostor Technology Corporation IS917 Mass storage), it is 32 GB
in size and sold under the PNY brand. The mentioned USB 2.0 drive is some
inexpensive no-name drive with an invalid USB ID.
Resetting USB 3.0 hubs only, which this patch introduces to the USB hub
resets, has been tested to work as expected, resolving the identified issues
on the Allwinner H616, while not introducing any new issues on other tested
Allwinner SoCs. Thus, let's fix it that way.
According to the USB 3.0 specification, resetting a USB 3.0 port is required
when an attached USB device transitions between different states, such as
when it resumes from suspend. Though, the Linux kernel performs additional
USB 3.0 port resets upon initial USB device attachment, as visible in commit
07194ab7be63 ("USB: Reset USB 3.0 devices on (re)discovery") in the kernel
source, to ensure proper state of the USB 3.0 hub port and proper USB mode
negotiation during the initial USB device attachment and enumeration.
These additional types of USB port resets don't exist for USB 2.0 hubs,
according the USB 2.0 specification. The resets seem to be added to the USB
3.0 specification as part of the port and device mode negotiation.
The Linux kernel resets USB 3.0 (i.e. SuperSpeed) hubs only, as visible in
commit
10d674a82e55 ("USB: When hot reset for USB3 fails, try warm reset.")
in the kernel source. The check for SuperSpeed hubs is performed in a way
that also applies to newer SuperSpeed Plus (USB 3.1 or 3.2) hubs as well,
which hopefully makes it future proof.
Fixes: 33e06dcbe57a ("common: usb-hub: Reset hub port before scanning")
Link:
https://lore.kernel.org/u-boot/
20240207102327.35125-1-i@shantur.com/T/#u
Link:
https://lore.kernel.org/u-boot/
20240201164604.
13315fa6@donnerap.manchester.arm.com/T/#u
Signed-off-by: Shantur Rathore <i@shantur.com>
Helped-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Tom Rini [Mon, 19 Feb 2024 13:55:17 +0000 (08:55 -0500)]
Merge tag 'u-boot-imx-master-
20240219' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/19683
- Convert msc_sm2s_imx8mp to DM_SERIAL.
- Make Ethernel functional on msc_sm2s_imx8mp.
- General improvements for msc_sm2s_imx8mp.
- Add suport for the Sielaff i.MX6 Solo board.
- Update GE HealthCare maitainers' e-mail addresses.
Frieder Schrempf [Thu, 15 Feb 2024 14:00:36 +0000 (15:00 +0100)]
doc: board: Add minimal documentation for Sielaff i.MX6 Solo board
Describe how to build and boot for the Sielaff i.MX6 Solo board.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Frieder Schrempf [Thu, 15 Feb 2024 14:00:35 +0000 (15:00 +0100)]
board: Add support for Sielaff i.MX6 Solo board
The Sielaff i.MX6 Solo board is a control and HMI board for vending
machines. Add support for this board.
The devicetree files are taken from pending changes in the Linux
kernel that are available from linux-next and will likely be
part of Linux v6.9.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Frieder Schrempf [Thu, 15 Feb 2024 14:00:34 +0000 (15:00 +0100)]
mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B
The datasheet can be found here:
https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/EN25Q80B_Ver.E.pdf
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Ian Ray [Tue, 13 Feb 2024 13:17:06 +0000 (15:17 +0200)]
MAINTAINERS: Update after GEHC spin-off
Update our email addresses, from @ge.com to @gehealthcare.com, after GE
HealthCare was spun-off from GE.
Remove Antti, who no longer works on the project.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Fabio Estevam [Tue, 13 Feb 2024 11:43:42 +0000 (08:43 -0300)]
msc_sm2s_imx8mp: Fix CONFIG_DEFAULT_FDT_FILE
There is no imx8mp-msc-sm2s.dtb file in upstream Linux.
Change it to imx8mp-msc-sm2s-ep1.dtb.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
Fabio Estevam [Tue, 13 Feb 2024 11:43:41 +0000 (08:43 -0300)]
msc_sm2s_imx8mp: Add redundant environment support
Redundant environment support is required for software updates.
Add support for it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
Fabio Estevam [Tue, 13 Feb 2024 11:43:40 +0000 (08:43 -0300)]
imx8mp-msc-sm2s: Add mmc aliases
Add mmc alias so that the eMMC is mmc0 and the SD card
is mmc1 to have a well defined device numbering scheme.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
Fabio Estevam [Tue, 13 Feb 2024 11:43:39 +0000 (08:43 -0300)]
msc_sm2s_imx8mp: Make Ethernet functional
Currently, the Ethernet ports are not working.
The Ethernet PHY reset lines are controlled by the TCA6424 I2C GPIO
expander.
The TCA6424 I2C GPIO expander is supported by the CONFIG_DM_PCA953X
driver.
Select the CONFIG_DM_PCA953X option so that the Ethernet PHYs can
go through a proper reset making Ethernet to be functional.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
Fabio Estevam [Tue, 13 Feb 2024 11:43:38 +0000 (08:43 -0300)]
msc_sm2s_imx8mp: Convert to DM_SERIAL
The conversion to DM_SERIAL is mandatory, so do the conversion.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
Tom Rini [Sat, 17 Feb 2024 23:37:07 +0000 (18:37 -0500)]
Merge branch 'master-porter' of https://source.denx.de/u-boot/custodians/u-boot-sh
- Renesas R-Car Gen2 fixes
Marek Vasut [Sun, 11 Feb 2024 17:34:30 +0000 (18:34 +0100)]
ARM: renesas: Enable LTO on R-Car
Enable LTO globally on Renesas R-Car platforms. This has been enabled
on a subset of boards already, but at this point it is safe to enable
it globally. This saves units or tens of kiB from the resulting build.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Marek Vasut [Sun, 11 Feb 2024 17:34:29 +0000 (18:34 +0100)]
ARM: renesas: Set R-Car Gen2 board size limit to 512 kiB
The maximum size of u-boot.img on R-Car Gen2 is 0x80000 or 512 kiB,
set the limit to avoid overflows as new functionality gets pulled in.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Marek Vasut [Sun, 11 Feb 2024 17:34:28 +0000 (18:34 +0100)]
ARM: renesas: Disable EFI on R-Car Gen2
These systems are unlikely to use EFI as this functionality has not been
enabled until it got pulled in by Kconfig default. This functionality
does add some 60-70 kiB to the u-boot.img size, which overflows the size
limit. Disable it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Niklas Söderlund [Fri, 9 Feb 2024 21:15:35 +0000 (22:15 +0100)]
clk: renesas: Fix broken clocks on all Gen2 boards
To prepare support for multiple register layouts pointers to register
tables where added to struct cpg_mssr_info. These pointers are suppose
to be filled in at probe time and no intended change in behavior was
intended.
However the new pointers where only filled in by some paths of the
driver implemented in clk-rcar-gen3.c. The path implemented in
clk-rcar-gen2.c was not updated leaving the pointers uninitialized
leading to a crash when trying to probe the clocks.
Fix this by filling in the pointers in the Gen2 code path with the
values used before they where moved to struct cpg_mssr_info.
Fixes: d413214fb748 ("clk: renesas: Add register pointers into struct cpg_mssr_info")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # R8A7791 Porter
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tom Rini [Thu, 15 Feb 2024 15:26:24 +0000 (10:26 -0500)]
Merge tag 'u-boot-dfu-
20240215' of https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-
20240215
- Fix avb_verify command with SD cards
- Add u-boot-dfu maintainer tree for AB/AVB
- Avb: report verified boot state based on lock state
- Misc avb refactors improve code quality
Igor Opaniuk [Fri, 9 Feb 2024 19:20:45 +0000 (20:20 +0100)]
doc: android: avb: sync usage details
Sync usage info with the one cmd/avb.c.
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240209192045.3961832-8-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Igor Opaniuk [Fri, 9 Feb 2024 19:20:44 +0000 (20:20 +0100)]
cmd: avb: rework do_avb_verify_part
Use existing str_avb_slot_error() function for obtaining
verification fail reason details.
Take into account device lock state for setting correct
androidboot.verifiedbootstate kernel cmdline parameter.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Link: https://lore.kernel.org/r/20240209192045.3961832-7-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Igor Opaniuk [Fri, 9 Feb 2024 19:20:43 +0000 (20:20 +0100)]
common: avb_verify: add str_avb_io_error/str_avb_slot_error
Introduce str_avb_io_error() and str_avb_slot_error() functions,
that provide a pointer to AVB runtime error message.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Link: https://lore.kernel.org/r/20240209192045.3961832-6-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Igor Opaniuk [Fri, 9 Feb 2024 19:20:42 +0000 (20:20 +0100)]
cmd: avb: rework prints
Simplify and add more context for prints where it's needed.
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240209192045.3961832-5-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Igor Opaniuk [Fri, 9 Feb 2024 19:20:41 +0000 (20:20 +0100)]
common: avb_verify: rework error/debug prints
Make error prints more verbose with additional context.
Also s/print/debug/g for prints, which might be relevant only
for debugging purposes.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Link: https://lore.kernel.org/r/20240209192045.3961832-4-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Igor Opaniuk [Fri, 9 Feb 2024 19:20:40 +0000 (20:20 +0100)]
avb: move SPDX license identifiers to the first line
Move SPDX license identifiers to the first line, so it conforms
to license placement rule [1]:
Placement:
The SPDX license identifier in kernel files shall be added at the first
possible line in a file which can contain a comment. For the majority
of files this is the first line, except for scripts which require the
'#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX
identifier goes into the second line.
[1] https://www.kernel.org/doc/Documentation/process/license-rules.rst
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Link: https://lore.kernel.org/r/20240209192045.3961832-3-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Igor Opaniuk [Fri, 9 Feb 2024 19:20:39 +0000 (20:20 +0100)]
common: avb_verify: don't call mmc_switch_part for SD
mmc_switch_part() is used for switching between hw partitions
on eMMC (boot0, boot1, user, rpmb).
There is no need to do that for SD card.
This fixes the avb command usage on SD cards.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240209192045.3961832-2-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Igor Opaniuk [Tue, 13 Feb 2024 07:36:38 +0000 (08:36 +0100)]
MAINTAINERS: add custodian tree info for AVB/AB
Add information about a custodian tree [1] for AVB/AB, which is
maintained by Mattijs Korpershoek.
[1] https://source.denx.de/u-boot/custodians/u-boot-dfu
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240213073638.1125429-1-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tom Rini [Wed, 14 Feb 2024 20:23:10 +0000 (15:23 -0500)]
Merge tag 'xilinx-for-v2024.04-rc3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2024.04-rc3
zynqmp:
- Cover missing _SE chip variants to fix fpga programming
versal:
- Enable LTO for mini configurations
versal-net:
- Enable LTO for mini configurations
- Fix GIC address to aligned with real silicon
xilinx:
- DTs cleanup and fixups
- Enable HTTP boot
- Add missing spl header to zynqmp.c
Caleb Connolly [Fri, 9 Feb 2024 15:11:34 +0000 (15:11 +0000)]
button: qcom-pmic: demote "unknown button" message to debug
This message isn't an error (there can be a watchdog subnode for example)
but it shouldn't be printed unless this driver is being debugged. Demote
it to a debug print.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Dan Carpenter [Wed, 31 Jan 2024 07:09:15 +0000 (10:09 +0300)]
button: qcom-pmic: fix some error checking
The pmic_reg_read() function can return errors. Add a check for that.
Fixes: 4e8aa0065d4b ("button: qcom-pmic: introduce Qualcomm PMIC button driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Michal Simek [Tue, 6 Feb 2024 11:51:39 +0000 (12:51 +0100)]
arm64: versal-net: Setup correct addresses of GICR/GICD
Previous addresses where used in past in emulation environment but never
gets to silicon that's why use correct addresses.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/5d3d0e1afb1f673ffeb4a1c5d7f040475c806a30.1707220293.git.michal.simek@amd.com
Tom Rini [Tue, 13 Feb 2024 23:16:57 +0000 (18:16 -0500)]
Prepare v2024.04-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 13 Feb 2024 22:31:11 +0000 (17:31 -0500)]
Merge branch '2024-02-13-assorted-updates'
- Add the button command patch, update MAINTAINERS entry for a platform,
fix a problem with the hash command, fix a problem on K3 platforms and
revert a change on verdin-am62.
Francesco Dolcini [Tue, 13 Feb 2024 16:00:03 +0000 (17:00 +0100)]
Revert "board: verdin-am62: set cpu core voltage depending on speed grade"
This reverts commit
d2099587d661c6ca2309256c0e04c06e26c8d34c.
According to TI changing the VDD_CORE while the SoC is running is not
allowed, the voltage must be set before the AM62 device reset is
released, revert this change therefore.
The correct solution would be to program the PMIC during manufactoring
according to the speed grade of the SoC.
Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1318338/am623-booting-from-mmc-failed-after-lowering-vdd_core-to-0-75v/5036508#5036508
Fixes: d2099587d661 ("board: verdin-am62: set cpu core voltage depending on speed grade")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Caleb Connolly [Tue, 9 Jan 2024 11:51:09 +0000 (11:51 +0000)]
boot: add support for button commands
With the relatively new button API in U-Boot, it's now much easier to
model the common usecase of mapping arbitrary actions to different
buttons during boot - for example entering fastboot mode, setting some
additional kernel cmdline arguments, or booting with a custom recovery
ramdisk, to name a few.
Historically, this functionality has been implemented in board code,
making it fixed for a given U-Boot binary and requiring the code be
duplicated and modified for every board.
Implement a generic abstraction to run an arbitrary command during boot
when a specific button is pressed. The button -> command mapping is
configured via environment variables with the following format:
button_cmd_N_name=<button label>
button_cmd_N=<command to run>
Where N is the mapping number starting from 0. For example:
button_cmd_0_name=vol_down
button_cmd_0=fastboot usb 0
This will cause the device to enter fastboot mode if volume down is held
during boot.
After we enter the cli loop the button commands are no longer valid,
this allows the buttons to additionally be used for navigating a boot
menu.
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Tegra30
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Igor Opaniuk [Wed, 7 Feb 2024 00:01:32 +0000 (01:01 +0100)]
cmd: hash: fix param count check
Add correct check for parameter count.
This fixes this issue when `hash` cmd is invoked without params:
=> hash
data abort
pc : [<
bf739204>] lr : [<
ba6effa8>]
reloc pc : [<
60019204>] lr : [<
5afcffa8>]
sp :
ba6dd9c8 ip :
bf7391f0 fp :
bf74ec14
r10:
00000001 r9 :
ba6dfea0 r8 :
bf7ea030
r7 :
00000000 r6 :
ba6effa8 r5 :
00000000 r4 :
ffffffff
r3 :
bf7c257c r2 :
00000001 r1 :
00000000 r0 :
bf7e6e34
Flags: nZCv IRQs off FIQs on Mode SVC_32
Code:
e5934004 e1a0e003 e59f3050 e2444001 (
e5f4c001)
Resetting CPU ...
resetting ...
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Roger Quadros [Tue, 6 Feb 2024 14:02:51 +0000 (16:02 +0200)]
memory: ti-gpmc: Fix lock up at A53 SPL during NAND boot on AM64-EVM
AM64 ES2.0 bootrom seems to enable WAIT0EDGEDETECTION interrupt.
This causes a lockup at A53 SPL when accessing NAND controller
or ELM registers.
A good option would be to softrest GPMC block at probe
but this cannot be done for AM64 as SOFTRESET bit is marked
as reserved in SYSCONFIG register.
Fix the issue by disabling all IRQs at probe.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Igor Opaniuk [Fri, 2 Feb 2024 21:44:29 +0000 (22:44 +0100)]
poplar: add myself as co-maintainer
Add myself as co-maintainer for Poplar board, as I'm currently
working on it (re-testing releases, addressing issues etc).
CC: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
CC: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Tom Rini [Mon, 12 Feb 2024 20:22:05 +0000 (15:22 -0500)]
Merge tag 'doc-2024-04-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2024-04-rc2
Documentation:
* Fix and extend utf8_to_utf32_stream() documentation
* Fix rendering of OpenSBI logo in VisionFive 2 description
* Document imxrt1170-evk board
* codingstyle.rst: Clarify include section
UEFI:
* simplify error message in efi_disk_create_raw()
Nils Le Roux [Sat, 2 Dec 2023 09:39:49 +0000 (10:39 +0100)]
net: designware: Support high memory nodes
Some platforms (such as the Lichee Pi 4A) have their dwmac device
addressable only in high memory space. Storing the node's base address
on 32 bits is not possible in such case.
Use platform's physical address type to store the base address.
Signed-off-by: Nils Le Roux <gilbsgilbert@gmail.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tom Rini [Fri, 9 Feb 2024 14:35:20 +0000 (09:35 -0500)]
doc/develop/codingstyle.rst: Clarify include section
Rework the section about includes slightly. We should not be using
common.h anywhere, so remove that from examples and ask people to send
patches removing it when found. Doing this also means we need to reword
other parts of this section. Be clearer about using alphabetical
ordering.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Janne Grunau [Sat, 10 Feb 2024 12:46:39 +0000 (13:46 +0100)]
lib: charset: Fix and extend utf8_to_utf32_stream() documentation
Clarify usage of buffer argument.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Fri, 2 Feb 2024 14:12:52 +0000 (15:12 +0100)]
efi_loader: simplify error message in efi_disk_create_raw()
The error message
Adding disk for usb_mass_storage.lun0 failed (err=-
9223372036854775788/0x8000000000000014)
provides a decimal and a hexadecimal notation of the EFI status code
EFI_ALREADY_STARTED which is defined as (EFI_ERROR_MASK | 20).
The decimal output does not convey the value 20 clearly.
With the patch we write
Adding block device usb_mass_storage.lun0 failed, r = 20
similar to other EFI error messages.
Fixes: 952018117ab4 ("dm: sandbox: Switch over to using the new host uclass")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Thu, 1 Feb 2024 16:32:53 +0000 (17:32 +0100)]
doc: board: starfive: fix rendering of OpenSBI logo
The rendering of the OpenSBI logo should look like the screen output.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Jesse Taube [Thu, 1 Feb 2024 15:00:04 +0000 (10:00 -0500)]
doc: imx: imxrt1170: Document imxrt1170-evk board
Add documentation for imxrt1170-evk.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Add index page entry, adjust formatting.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Mon, 12 Feb 2024 14:26:20 +0000 (09:26 -0500)]
Merge tag 'u-boot-imx-master-
20240212' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/19583
- Fix the i.MX8MP SPI compatible string.
- Let the SPL clock code do the configuration on Data Modul i.MX8M Plus
eDM SBC.
- Enable secure boot on the imx93_var_som board.
Venkatesh Yadav Abbarapu [Wed, 7 Feb 2024 08:33:28 +0000 (14:03 +0530)]
xilinx: zynqmp: Add the missing function prototype
Add missing prototype to fix the below sparse warning
warning: no previous prototype for 'spl_spi_get_uboot_offs'
[-Wmissing-prototypes]
Fixes: 2c8a09219cdb ("arm64: zynqmp: Add multiboot support for SPL/SPI offset calculation")
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240207083328.1673752-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Michal Simek [Thu, 1 Feb 2024 12:38:44 +0000 (13:38 +0100)]
arm64: zynqmp: Disable DP on kd240
When SOM dt is combined with kd240 overlay DPSUB is enabled but kd240 has
no DP wired that's why change disable it via status property.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f6de217b3350c9d59032ef54800882e48f240398.1706791116.git.michal.simek@amd.com
Michal Simek [Thu, 1 Feb 2024 12:38:43 +0000 (13:38 +0100)]
arm64: zynqmp: Do not expose usbhub nodes on kr260 usb1
usb0 is already updated but forget to also update usb1.
Fixes: 4ff083f09bc2 ("arm64: zynqmp: Do not expose usbhub nodes")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/862ca748670f18f25d88aa5b43c37e3dd6aa35eb.1706791116.git.michal.simek@amd.com
Michal Simek [Thu, 1 Feb 2024 12:38:42 +0000 (13:38 +0100)]
arm64: zynqmp: Align nvmem-fw node with dt-schema
Node name has to be renamed to be aligned with dt-schema and also
xlnx,zynqmp-nvmem-fw switched to fixed-layout.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/32899b20c1e282aab16c32074b1c9a3f45f6dac8.1706791116.git.michal.simek@amd.com
Michal Simek [Thu, 1 Feb 2024 12:38:41 +0000 (13:38 +0100)]
arm64: zynqmp: Remove arm,cortex-a53-edac node
There is no dt schema associated with it. Also Linux driver have been
removed in Xilinx Linux tree and never gets to upstream that's why remove
description for it.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6685ee980d9b475f95eef6b2a74795adc4ac4619.1706791116.git.michal.simek@amd.com
Michal Simek [Thu, 1 Feb 2024 12:38:40 +0000 (13:38 +0100)]
xilinx: Fix fpga region DT nodes name
fpga-full is not aligned with the latest dt-schema. Generic name
fpga-region should be used.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/78e6e3f287f79917eb92c6c74accbaf955526aad.1706791116.git.michal.simek@amd.com
Michal Simek [Tue, 30 Jan 2024 14:51:06 +0000 (15:51 +0100)]
arm64: zynqmp: Fix kr260 clock wiring
kr260 revA/revA01 is using discrete oscilator for DP (27MHz) and si5332 for
other clocks but clocks are different compare to kv260 that's why fix it to
aligned with the latest schematics.
On the other handle kr260 revB/revA03 also contains 74.25 MHz discrete
clock chip for SLVC-EC output which is not defined.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e87ae94979c6efc909740bb1a569505042e4f876.1706626255.git.michal.simek@amd.com
Michal Simek [Mon, 29 Jan 2024 07:46:43 +0000 (08:46 +0100)]
arm64: zynqmp: Describe 25MHz fixed clock for PL GEMs
Describe 25Mhz fixed oscilator which is providing clock for PL based
ethernet IPs. Physicially it is one chip but it is described as 2 fixed
clock to be aligned with other SOM versions which were using integrated
clock generators where clocks could be adjusted via i2c (si5332 chips).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c430aeacaa76d9f61ed3f874f721a33049f45eb9.1706514396.git.michal.simek@amd.com
Michal Simek [Fri, 26 Jan 2024 07:24:41 +0000 (08:24 +0100)]
arm64: zynqmp: Sync clock labels with kr260 revB
Board description describes the hard part of chip (PS) but programmable
logic (PL) part is not described in this file. But clocks on the board are
not only connected to PS but also wired to PL. And because two revisions
are available where revA is using one si5332 and revB multiple clock chips
using the same clock labels helping with keeping only one device tree
overlay which targets PL. That's why synchronize clock labels and use
labels from revB which are more generic.
Unfortunately if there is driver for si5332 chip split could happen again
but it is still worth to do it now and solve this issue when occurs.
Reported-by: Sagar Karmarkar <sagar.karmarkar@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/abac6069e6029ed4076ec7b9d6b33604b6072aa3.1706253871.git.michal.simek@amd.com
Saeed Nowshadi [Thu, 25 Jan 2024 08:07:58 +0000 (09:07 +0100)]
arm64: zynqmp: Add 'silabs, skip-recall' to all si570 clk nodes
Without 'silabs,skip-recall' property, the driver on System Controller
re-calibrates the output clock frequency at probe() time based on the NVRAM
setting. This re-calibration causes a glitch on the output clock. At
power-on, Versal is also booting and expecting a glitch-free clock for
its correct operation. System Controller should skip the re-calibration
step to prevent any clock instability for Versal.
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/bbb2322c94503f0e6b369c60312b7546500fad95.1706170068.git.michal.simek@amd.com
Michal Simek [Wed, 24 Jan 2024 10:58:40 +0000 (11:58 +0100)]
arm64: xilinx: Enable EFI_HTTP_BOOT by default
Enable EFI_HTTP_BOOT to be able to booting OS via http.
In case of that dhcp server is not providing dns server IP set it up via
setenv dnsip <ip addr>.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/b78a7d8b0100c724f657c0997b273e073cf31a14.1706093917.git.michal.simek@amd.com
Venkatesh Yadav Abbarapu [Fri, 26 Jan 2024 08:11:39 +0000 (13:41 +0530)]
configs: versal_net: Enable CONFIG_LTO for mini qspi/ospi
Adding a tiny bit more code for mini u-boot leads to a OCM
image overflow. Fix this by enabling LTO for this board, so that such
changes still can be made to the common U-Boot code.
Enable building mini u-boot image with LTO, which results in about 8KB
reduction in size.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240126081139.3210211-1-venkatesh.abbarapu@amd.com
Venkatesh Yadav Abbarapu [Fri, 26 Jan 2024 08:09:00 +0000 (13:39 +0530)]
configs: versal: Enable CONFIG_LTO for mini qspi/ospi
Adding a tiny bit more code for mini u-boot leads to a OCM
image overflow. Fix this by enabling LTO for this board, so that such
changes still can be made to the common U-Boot code.
Enable building mini u-boot image with LTO, which results in about 8KB
reduction in size.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240126080900.3209323-1-venkatesh.abbarapu@amd.com
Venkatesh Yadav Abbarapu [Tue, 23 Jan 2024 04:57:15 +0000 (10:27 +0530)]
soc: zynqmp: Add the IDcode for dr_SE and eg_SE variants
ID code is added for zu67dr_SE, zu11eg_SE, zu19eg_SE and zu47dr_SE
variants. SE is the select edition of restricted devices with the
capabilities.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240123045715.893652-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Tom Rini [Sun, 11 Feb 2024 17:42:25 +0000 (12:42 -0500)]
Merge branch 'master-779h0-r2' of https://source.denx.de/u-boot/custodians/u-boot-sh
Mathieu Othacehe [Fri, 9 Feb 2024 10:30:09 +0000 (11:30 +0100)]
configs: imx93_var_som: Enable AHAB support
Enable AHAB support in the imx93_var_som configuration.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Mathieu Othacehe [Fri, 9 Feb 2024 10:30:08 +0000 (11:30 +0100)]
board: imx93_var_som: Probe ELE MU
Probing the MU is needed to prevent this error in the SPL:
ele dev is not initialized
Authenticate container hdr failed, return -19, resp 0x0
IND = INVALID
ele dev is not initialized
Error: release container failed, resp 0x0!
IND = INVALID
SPL: failed to boot from all boot devices
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Mathieu Othacehe [Fri, 9 Feb 2024 10:30:07 +0000 (11:30 +0100)]
imx93: Use a header for imx9_probe_mu declaration
Put imx9_probe_mu declaration in a new mu.h header file.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Marek Vasut [Thu, 8 Feb 2024 23:59:50 +0000 (00:59 +0100)]
spi: mxc_spi: Add imx6ul-ecspi compatible string
Recent i.MX8MP DTs use new fsl,imx6ul-ecspi compatible string instead
of the fsl,imx51-ecspi compatible string. Add the new compatible string
to fix ECSPI operation on i.MX8MP.
For details, see Linux:
48d74376fb68 ("arm64: dts: imx8mp: update ecspi compatible and clk")
8eb1252bbedf ("spi: imx: remove ERR009165 workaround on i.mx6ul")
Fixes: 451799a6ceac ("arm: dts: imx8mp: Sync the DT with kernel 6.4-rc4")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Marek Vasut [Thu, 8 Feb 2024 17:33:50 +0000 (18:33 +0100)]
ARM: imx: Let SPL configure ECSPI1 clock on Data Modul i.MX8M Plus eDM SBC
The SPL clock code does configure the ECSPI clock frequency, which has
to match the mxc-spi driver configuration for successful SPI NOR boot.
Drop the assigned-clock from DT ecspi1 node on this board to let the
SPL clock code do the configuration and keep it aligned with the driver
expectation.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Hai Pham [Sun, 28 Jan 2024 15:52:09 +0000 (16:52 +0100)]
ARM: renesas: Add Renesas R8A779H0 V4M Gray Hawk board code
Add board code for the Renesas R8A779H0 V4M Gray Hawk board.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Hai Pham [Sun, 28 Jan 2024 15:52:08 +0000 (16:52 +0100)]
ARM: dts: renesas: Add Renesas Gray Hawk boards support
Initial support for the Renesas Gray Hawk CPU and BreakOut boards.
The arch/arm/dts/r8a779h0-gray-hawk-cpu.dtsi is extended version of:
https://lore.kernel.org/linux-renesas-soc/
b657402113267acd57aece0b4c681b707e704455.
1706194617.git.geert+renesas@glider.be/
The version currenty submitted upstream lacks functionality which is
present in this series. Once the upstream support implements that
missing functionality, these DTs will be updated to match.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Hai Pham [Sun, 28 Jan 2024 15:52:07 +0000 (16:52 +0100)]
ARM: dts: renesas: Add Renesas R8A779H0 V4M DT extras
Add Renesas R8A779H0 V4M DT extras for U-Boot.
Until the RPC node becomes part of main DT, keep it here as
an extension so that board code can enable and use the RPC
to access SPI NOR.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Hai Pham [Sun, 28 Jan 2024 15:52:06 +0000 (16:52 +0100)]
ARM: dts: renesas: Add Renesas R8A779H0 V4M SoC support
Add initial support for the Renesas R8A779H0 (R-Car V4M) SoC.
The current version is imported and modified from:
https://lore.kernel.org/linux-renesas-soc/
4107bc3d7c31932da29e671ddf4b1564ba38a84c.
1706194617.git.geert+renesas@glider.be/
The modifications contain nodes from previous version
which are useful in U-Boot and not part of the Linux
kernel DT yet. The following nodes were added:
- pfc
- gpio0..gpio7
- i2c0..i2c3
- avb0..avb2
- mmc0
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Hai Pham [Sun, 28 Jan 2024 15:52:05 +0000 (16:52 +0100)]
mtd: spi: renesas: Add R8A779H0 V4M support
Support RPC SPI on R8A779H0 V4M SoC.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Hai Pham [Sun, 28 Jan 2024 15:52:04 +0000 (16:52 +0100)]
ARM: renesas: Add R8A779H0 V4M Kconfig entry and PRR ID
Add Kconfig entry and PRR ID to support R8A779H0 V4M SoC.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Hai Pham [Sun, 28 Jan 2024 15:52:03 +0000 (16:52 +0100)]
pinctrl: renesas: Add R8A779H0 V4M PFC tables
Add pinctrl tables for R8A779H0 V4M SoC.
The current version of these PFC tables is imported and squashed from:
https://lore.kernel.org/linux-renesas-soc/cover.
1706264667.git.geert+renesas@glider.be/
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Marek Vasut [Sun, 28 Jan 2024 15:52:02 +0000 (16:52 +0100)]
clk: renesas: Implement R8A779H0 V4M PLL7 support
Add PLL7 support to Gen3/Gen4 common clock driver. Add initial PLL7
multiplier and divider values into table in R8A779H0 V4M clock driver.
The PLL7 is new PLL added in R8A779H0 V4M SoC. Only integer multiplication
mode is supported by PLL7. The PLL reference clock are either 16.66 MHz or
20 MHz on R8A779H0 V4M SoC, and the output frequency must be 2000 MHz. The
multiplier values fitting this requirement are calculated to 120 or 100.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Hai Pham [Sun, 28 Jan 2024 15:52:01 +0000 (16:52 +0100)]
clk: renesas: Add R8A779H0 V4M clock tables
Add clock tables for R8A779H0 V4M SoC.
The current version is imported from:
https://lore.kernel.org/linux-renesas-soc/
c678ef7164e3777fa91572f72e47ef385cea64b8.
1706194617.git.geert+renesas@glider.be/
The current version still contains PLL7 extras from the
previous version to provide ethernet support in U-Boot.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Duy Nguyen [Sun, 28 Jan 2024 15:52:00 +0000 (16:52 +0100)]
dt-bindings: power: Add R8A779H0 V4M SYSC power domain definitions
Add power domain indices for R-Car V4M (R8A779H0).
The current version is imported from:
https://lore.kernel.org/linux-renesas-soc/
c5cbef71178cada761e9da7bcbb6f21334f93ef8.
1706194617.git.geert+renesas@glider.be/
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Duy Nguyen [Sun, 28 Jan 2024 15:51:59 +0000 (16:51 +0100)]
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
V4M (R8A779H0) SoC.
The current version is imported from:
https://lore.kernel.org/linux-renesas-soc/
11acbd2a30b58607474e9c32eb798b3a00e85e73.
1706194617.git.geert+renesas@glider.be/
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Tom Rini [Fri, 9 Feb 2024 14:00:42 +0000 (09:00 -0500)]
Merge tag 'u-boot-dfu-
20240209' of https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-
20240209
- sparse error checking fix when using raw chunks
- 2 new additions (AVB, AB) of myself to the MAINTAINERS file
Sean Anderson [Thu, 1 Feb 2024 18:18:51 +0000 (13:18 -0500)]
lib: sparse: Fix error checking for write_sparse_chunk_raw
The return value of write_sparse_chunk_raw is unsigned, so the existing
check has no effect. Use IS_ERR_VALUE to detect error instead, which is
what write_sparse_chunk_raw does itself.
Fixes: 62649165cb0 ("lib: sparse: Make CHUNK_TYPE_RAW buffer aligned")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/u-boot/1b323ec3-59b0-490b-a2f0-fd961dafcf49@moroto.mountain/
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240201181851.221701-1-sean.anderson@seco.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Mattijs Korpershoek [Fri, 12 Jan 2024 08:40:45 +0000 (09:40 +0100)]
MAINTAINERS: add Mattijs for Android AVB
Igor has not been active for quite some time on lore:
https://lore.kernel.org/all/?q=igor.opaniuk@gmail.com
I'm interested in helping with maintaining the android_avb
command. I'm a long time android/aosp developer and my daily job is
still doing android work.
Add myself as maintainer for Android AVB.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Acked-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240112-maintainers-ab-v1-2-f2a538eab18a@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Mattijs Korpershoek [Fri, 12 Jan 2024 08:40:44 +0000 (09:40 +0100)]
MAINTAINERS: add Mattijs for Android AB
Igor has not been active for quite some time on lore:
https://lore.kernel.org/all/?q=igor.opaniuk@gmail.com
I'm interested in helping with maintaining the android_ab
command. I'm a long time android/aosp developer and my daily job is
still doing android work.
Add myself as maintainer for Android AB.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Link: https://lore.kernel.org/r/20240112-maintainers-ab-v1-1-f2a538eab18a@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>