From: Bin Meng Date: Wed, 6 Jan 2021 12:58:54 +0000 (+0800) Subject: mtd: spi-nor.h: Change spaces to tabs X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=6770c96fe59eca919805904c48fafac97720be74;p=u-boot.git mtd: spi-nor.h: Change spaces to tabs U-Boot coding convention prefers tabs over spaces. Signed-off-by: Bin Meng Reviewed-by: Jagan Teki --- diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 4a8e19ee4f..0c438e9c89 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -48,13 +48,13 @@ #define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */ #define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad Output SPI) */ #define SPINOR_OP_READ_1_4_4 0xeb /* Read data bytes (Quad I/O SPI) */ -#define SPINOR_OP_READ_1_1_8 0x8b /* Read data bytes (Octal Output SPI) */ -#define SPINOR_OP_READ_1_8_8 0xcb /* Read data bytes (Octal I/O SPI) */ +#define SPINOR_OP_READ_1_1_8 0x8b /* Read data bytes (Octal Output SPI) */ +#define SPINOR_OP_READ_1_8_8 0xcb /* Read data bytes (Octal I/O SPI) */ #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */ #define SPINOR_OP_PP_1_1_4 0x32 /* Quad page program */ #define SPINOR_OP_PP_1_4_4 0x38 /* Quad page program */ -#define SPINOR_OP_PP_1_1_8 0x82 /* Octal page program */ -#define SPINOR_OP_PP_1_8_8 0xc2 /* Octal page program */ +#define SPINOR_OP_PP_1_1_8 0x82 /* Octal page program */ +#define SPINOR_OP_PP_1_8_8 0xc2 /* Octal page program */ #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */ #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ #define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */ @@ -75,13 +75,13 @@ #define SPINOR_OP_READ_1_2_2_4B 0xbc /* Read data bytes (Dual I/O SPI) */ #define SPINOR_OP_READ_1_1_4_4B 0x6c /* Read data bytes (Quad Output SPI) */ #define SPINOR_OP_READ_1_4_4_4B 0xec /* Read data bytes (Quad I/O SPI) */ -#define SPINOR_OP_READ_1_1_8_4B 0x7c /* Read data bytes (Octal Output SPI) */ -#define SPINOR_OP_READ_1_8_8_4B 0xcc /* Read data bytes (Octal I/O SPI) */ +#define SPINOR_OP_READ_1_1_8_4B 0x7c /* Read data bytes (Octal Output SPI) */ +#define SPINOR_OP_READ_1_8_8_4B 0xcc /* Read data bytes (Octal I/O SPI) */ #define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */ #define SPINOR_OP_PP_1_1_4_4B 0x34 /* Quad page program */ #define SPINOR_OP_PP_1_4_4_4B 0x3e /* Quad page program */ -#define SPINOR_OP_PP_1_1_8_4B 0x84 /* Octal page program */ -#define SPINOR_OP_PP_1_8_8_4B 0x8e /* Octal page program */ +#define SPINOR_OP_PP_1_1_8_4B 0x84 /* Octal page program */ +#define SPINOR_OP_PP_1_8_8_4B 0x8e /* Octal page program */ #define SPINOR_OP_BE_4K_4B 0x21 /* Erase 4KiB block */ #define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */ #define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */ @@ -122,8 +122,8 @@ #define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */ /* Used for Micron flashes only. */ -#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ -#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ +#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ +#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ /* Status Register bits. */ #define SR_WIP BIT(0) /* Write in progress */