From: Hoegeun Kwon Date: Wed, 28 Jun 2023 10:19:49 +0000 (+0900) Subject: clk: starfive: pll: Fix to use postdiv1_mask X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=422fc299df9b873e7e485db08621e5fb499c6a8f;p=u-boot.git clk: starfive: pll: Fix to use postdiv1_mask There is a problem that the rates of PLL0 and PLL1 are set incorrectly because the postdiv1_mask value is incorrectly entered when setting the pll clk reg. Modify postdiv1's mask value to be put correctly. Signed-off-by: Hoegeun Kwon Reviewed-by: Minkyu Kang --- diff --git a/drivers/clk/starfive/clk-jh7110-pll.c b/drivers/clk/starfive/clk-jh7110-pll.c index 02e6d9000e..7492b1f70d 100644 --- a/drivers/clk/starfive/clk-jh7110-pll.c +++ b/drivers/clk/starfive/clk-jh7110-pll.c @@ -185,7 +185,7 @@ static void jh7110_pll_set_rate(struct clk_jh7110_pllx *pll, PLLX_SET(pll->offset->dsmpd, pll->offset->dsmpd_mask, 1); PLLX_SET(pll->offset->prediv, pll->offset->prediv_mask, rate->prediv); PLLX_SET(pll->offset->fbdiv, pll->offset->fbdiv_mask, rate->fbdiv); - PLLX_SET(pll->offset->postdiv1, pll->offset->postdiv1, 0); + PLLX_SET(pll->offset->postdiv1, pll->offset->postdiv1_mask, 0); PLLX_SET(pll->offset->pd, pll->offset->pd_mask, PLL_PD_ON); if (set) {