From: Peter Tyser <ptyser@xes-inc.com>
Date: Mon, 9 Nov 2009 19:09:44 +0000 (-0600)
Subject: tsec: Clean up Broadcom PHY status parsing
X-Git-Tag: v2025.01-rc5-pxa1908~20494^2~9
X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=27165b5c328464b706601b1cd586e359a3dc2f6d;p=u-boot.git

tsec: Clean up Broadcom PHY status parsing

- Remove unnecessary printing "Enet starting in <speed>/<duplex>"
    This same information is already printed during normal ethernet
    operation in the form "Speed: 1000, full duplex".

- Add a check for link before determining link speed and duplex
    If there is no link, speed/duplex don't matter.  This also removes
    the annoying and unneeded "Auto-neg error, defaulting to 10BT/HD"
    message that occurs when no link is detected.

- Whitespace and line > 80 characters cleanup

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
---

diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 67441d4ea7..76902bcd83 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -488,50 +488,41 @@ uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
  */
 uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
 {
+	/* If there is no link, speed and duplex don't matter */
+	if (!priv->link)
+		return 0;
 
-	switch((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >> MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT){
-
-		case 1:
-			printf("Enet starting in 10BT/HD\n");
-			priv->duplexity = 0;
-			priv->speed = 10;
-			break;
-
-		case 2:
-			printf("Enet starting in 10BT/FD\n");
-			priv->duplexity = 1;
-			priv->speed = 10;
-			break;
-
-		case 3:
-			printf("Enet starting in 100BT/HD\n");
-			priv->duplexity = 0;
-			priv->speed = 100;
-			break;
-
-		case 5:
-			printf("Enet starting in 100BT/FD\n");
-			priv->duplexity = 1;
-			priv->speed = 100;
-			break;
-
-		case 6:
-			printf("Enet starting in 1000BT/HD\n");
-			priv->duplexity = 0;
-			priv->speed = 1000;
-			break;
-
-		case 7:
-			printf("Enet starting in 1000BT/FD\n");
-			priv->duplexity = 1;
-			priv->speed = 1000;
-			break;
-
-		default:
-			printf("Auto-neg error, defaulting to 10BT/HD\n");
-			priv->duplexity = 0;
-			priv->speed = 10;
-			break;
+	switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
+		MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
+	case 1:
+		priv->duplexity = 0;
+		priv->speed = 10;
+		break;
+	case 2:
+		priv->duplexity = 1;
+		priv->speed = 10;
+		break;
+	case 3:
+		priv->duplexity = 0;
+		priv->speed = 100;
+		break;
+	case 5:
+		priv->duplexity = 1;
+		priv->speed = 100;
+		break;
+	case 6:
+		priv->duplexity = 0;
+		priv->speed = 1000;
+		break;
+	case 7:
+		priv->duplexity = 1;
+		priv->speed = 1000;
+		break;
+	default:
+		printf("Auto-neg error, defaulting to 10BT/HD\n");
+		priv->duplexity = 0;
+		priv->speed = 10;
+		break;
 	}
 
 	return 0;