From: Sam Protsenko Date: Thu, 8 Aug 2024 03:14:44 +0000 (-0500) Subject: doc: samsung: Mention enabled eMMC in E850-96 board doc X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=25a972368cf926b4d70c22a2de65d959774d5cc5;p=u-boot.git doc: samsung: Mention enabled eMMC in E850-96 board doc eMMC is enabled on E850-96 board now. Mention that in the board documentation. Signed-off-by: Sam Protsenko Signed-off-by: Minkyu Kang --- diff --git a/doc/board/samsung/e850-96.rst b/doc/board/samsung/e850-96.rst index 0cb95473e5..0a7b6fc0c9 100644 --- a/doc/board/samsung/e850-96.rst +++ b/doc/board/samsung/e850-96.rst @@ -47,12 +47,13 @@ Build Procedure --------------- .. warning:: - At the moment both eMMC and USB features are not enabled in U-Boot. Flashing + At the moment USB is not enabled in U-Boot for this board. Although eMMC is + enabled, you won't be able to flash images over USB (fastboot). So flashing U-Boot binary **WILL** effectively brick your board. The ``dltool`` [8]_ can be used then to perform USB boot and flash LittleKernel bootloader binary [7]_ to unbrick and revive the board. Flashing U-Boot binary might be helpful for developers or anybody who want to check current state of U-Boot enablement on - E850-96 (which is mostly serial console and related blocks). + E850-96 (which is mostly serial console, eMMC and related blocks). Build U-Boot binary from source code (using AArch64 baremetal GCC toolchain):