From 8e374457bad7ab9dcaae580cfbbd2b1ca02c46a1 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marex@denx.de>
Date: Mon, 19 Sep 2022 21:41:16 +0200
Subject: [PATCH] ARM: imx8m: phycore_imx8mm: Drop bogus spl_board_init()
The current implementation of spl_board_init() is not correct,
the MX8MM BootROM v1 does not support SDP load when re-entered
from U-Boot SPL, it is up to U-Boot to perform the next stage
load using its own internal CI gadget driver and SDP protocol
implementation. Drop the spl_board_init() to let SPL continue
with normal load in case the SDP support is enabled.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
board/phytec/phycore_imx8mm/spl.c | 10 ----------
configs/phycore-imx8mm_defconfig | 1 -
2 files changed, 11 deletions(-)
diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c
index d87ab6d449..1bae9b1170 100644
--- a/board/phytec/phycore_imx8mm/spl.c
+++ b/board/phytec/phycore_imx8mm/spl.c
@@ -42,16 +42,6 @@ static void spl_dram_init(void)
ddr_init(&dram_timing);
}
-void spl_board_init(void)
-{
- /* Serial download mode */
- if (is_usb_boot()) {
- puts("Back to ROM, SDP\n");
- restore_boot_params();
- }
- puts("Normal Boot\n");
-}
-
int board_fit_config_name_match(const char *name)
{
return 0;
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 9b8c09a73a..e8d7905bb4 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -30,7 +30,6 @@ CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x910000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x920000
CONFIG_SYS_SPL_MALLOC=y
--
2.39.5