From: Wadim Egorov Date: Fri, 19 Apr 2024 06:51:15 +0000 (+0200) Subject: phycore-am62x: Migrate to OF_UPSTREAM X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=fa29f4b964e301ecb9f99d8812e036ef28a56cf8;p=u-boot.git phycore-am62x: Migrate to OF_UPSTREAM The phycore-am62x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. Signed-off-by: Wadim Egorov --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b1c9c6222e..3646c64d05 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1354,7 +1354,6 @@ dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \ k3-am625-beagleplay.dtb \ k3-am625-r5-beagleplay.dtb \ k3-am625-verdin-r5.dtb \ - k3-am625-phyboard-lyra-rdk.dtb \ k3-am625-r5-phycore-som-2gb.dtb dtb-$(CONFIG_SOC_K3_AM62A7) += k3-am62a7-sk.dtb \ diff --git a/arch/arm/dts/k3-am62-phycore-som.dtsi b/arch/arm/dts/k3-am62-phycore-som.dtsi deleted file mode 100644 index aa43e7407e..0000000000 --- a/arch/arm/dts/k3-am62-phycore-som.dtsi +++ /dev/null @@ -1,324 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH - * Author: Wadim Egorov - * - * Product homepage: - * https://www.phytec.com/product/phycore-am62x - */ - -#include -#include -#include - -/ { - model = "PHYTEC phyCORE-AM62x"; - compatible = "phytec,am62-phycore-som", "ti,am625"; - - aliases { - ethernet0 = &cpsw_port1; - gpio0 = &main_gpio0; - gpio1 = &main_gpio1; - i2c0 = &main_i2c0; - mmc0 = &sdhci0; - rtc0 = &i2c_som_rtc; - rtc1 = &wkup_rtc0; - spi0 = &ospi0; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; - - reserved_memory: reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - ramoops@9ca00000 { - compatible = "ramoops"; - reg = <0x00 0x9ca00000 0x00 0x00100000>; - record-size = <0x8000>; - console-size = <0x8000>; - ftrace-size = <0x00>; - pmsg-size = <0x8000>; - }; - - secure_tfa_ddr: tfa@9e780000 { - reg = <0x00 0x9e780000 0x00 0x80000>; - alignment = <0x1000>; - no-map; - }; - - secure_ddr: optee@9e800000 { - reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ - alignment = <0x1000>; - no-map; - }; - - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { - compatible = "shared-dma-pool"; - reg = <0x00 0x9db00000 0x00 0x00c00000>; - no-map; - }; - }; - - vcc_5v0_som: regulator-vcc-5v0-som { - compatible = "regulator-fixed"; - regulator-name = "VCC_5V0_SOM"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8: regulator-vdd-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_5v0_som>; - regulator-always-on; - regulator-boot-on; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_default>; - - led-0 { - color = ; - gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - function = LED_FUNCTION_HEARTBEAT; - }; - }; -}; - -&main_pmx0 { - leds_pins_default: leds-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x034, PIN_OUTPUT, 7) /* (H21) OSPI0_CSN2.GPIO0_13 */ - >; - }; - - main_i2c0_pins_default: main-i2c0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ - AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ - >; - }; - - main_mdio1_pins_default: main-mdio1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ - AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ - >; - }; - - main_mmc0_pins_default: main-mmc0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y3) MMC0_CMD */ - AM62X_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB1) MMC0_CLK */ - AM62X_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA2) MMC0_DAT0 */ - AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ - AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ - AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ - AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ - AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ - AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ - AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ - >; - }; - - main_rgmii1_pins_default: main-rgmii1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ - AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ - AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ - AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ - AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ - AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ - AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ - AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ - AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ - AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ - AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ - AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ - >; - }; - - ospi0_pins_default: ospi0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ - AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ - AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ - AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ - AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ - AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ - AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */ - AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */ - AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */ - AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ - AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */ - >; - }; - - pmic_irq_pins_default: pmic-irq-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */ - >; - }; -}; - -&cpsw3g { - pinctrl-names = "default"; - pinctrl-0 = <&main_rgmii1_pins_default>; -}; - -&cpsw_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy1>; -}; - -&cpsw3g_mdio { - pinctrl-names = "default"; - pinctrl-0 = <&main_mdio1_pins_default>; - status = "okay"; - - cpsw3g_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; - reg = <1>; - ti,rx-internal-delay = ; - ti,fifo-depth = ; - }; -}; - -&main_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; - status = "okay"; - - pmic@30 { - compatible = "ti,tps65219"; - reg = <0x30>; - buck1-supply = <&vcc_5v0_som>; - buck2-supply = <&vcc_5v0_som>; - buck3-supply = <&vcc_5v0_som>; - ldo1-supply = <&vdd_3v3>; - ldo2-supply = <&vdd_1v8>; - ldo3-supply = <&vcc_5v0_som>; - ldo4-supply = <&vcc_5v0_som>; - - pinctrl-names = "default"; - pinctrl-0 = <&pmic_irq_pins_default>; - interrupt-parent = <&gic500>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; - - ti,power-button; - system-power-controller; - - regulators { - vdd_core: buck1 { - regulator-name = "VDD_CORE"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-boot-on; - regulator-always-on; - }; - - vdd_3v3: buck2 { - regulator-name = "VDD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vdd_ddr4: buck3 { - regulator-name = "VDD_DDR4"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - - vddshv5_sdio: ldo1 { - regulator-name = "VDDSHV5_SDIO"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-allow-bypass; - regulator-boot-on; - regulator-always-on; - }; - - vddr_core: ldo2 { - regulator-name = "VDDR_CORE"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-boot-on; - regulator-always-on; - }; - - vdda_1v8: ldo3 { - regulator-name = "VDDA_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - vdd_2v5: ldo4 { - regulator-name = "VDD_2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - - eeprom@50 { - compatible = "atmel,24c32"; - pagesize = <32>; - reg = <0x50>; - }; - - i2c_som_rtc: rtc@52 { - compatible = "microcrystal,rv3028"; - reg = <0x52>; - }; -}; - -&ospi0 { - pinctrl-names = "default"; - pinctrl-0 = <&ospi0_pins_default>; - status = "okay"; - - serial_flash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-tx-bus-width = <8>; - spi-rx-bus-width = <8>; - spi-max-frequency = <25000000>; - cdns,tshsl-ns = <60>; - cdns,tsd2d-ns = <60>; - cdns,tchsh-ns = <60>; - cdns,tslch-ns = <60>; - cdns,read-delay = <0>; - }; -}; - -&sdhci0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; - non-removable; - status = "okay"; -}; diff --git a/arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts b/arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts deleted file mode 100644 index a438baf542..0000000000 --- a/arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts +++ /dev/null @@ -1,266 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH - * Author: Wadim Egorov - * - * Product homepage: - * https://www.phytec.com/product/phyboard-am62x - */ - -#include -#include -#include -#include -#include "k3-am625.dtsi" -#include "k3-am62-phycore-som.dtsi" - -/ { - compatible = "phytec,am625-phyboard-lyra-rdk", - "phytec,am62-phycore-som", "ti,am625"; - model = "PHYTEC phyBOARD-Lyra AM625"; - - aliases { - serial2 = &main_uart0; - serial3 = &main_uart1; - mmc1 = &sdhci1; - usb0 = &usb0; - usb1 = &usb1; - ethernet1 = &cpsw_port2; - }; - - can_tc1: can-phy0 { - compatible = "ti,tcan1042"; - #phy-cells = <0>; - max-bitrate = <5000000>; - standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; - }; - - keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins_default>; - - key-home { - label = "home"; - linux,code = ; - gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - key-menu { - label = "menu"; - linux,code = ; - gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>; - - led-1 { - gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - }; - - led-2 { - gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - }; - }; - - vcc_3v3_mmc: regulator-vcc-3v3-mmc { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3_MMC"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&main_pmx0 { - gpio_keys_pins_default: gpio-keys-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ - >; - }; - - gpio_exp_int_pins_default: gpio-exp-int-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ - >; - }; - - main_i2c1_pins_default: main-i2c1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ - AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ - >; - }; - - main_mcan0_pins_default: main-mcan0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */ - AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ - >; - }; - - main_mmc1_pins_default: main-mmc1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */ - AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */ - AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */ - AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */ - AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */ - AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */ - AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ - >; - }; - - main_rgmii2_pins_default: main-rgmii2-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ - AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ - AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ - AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ - AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ - AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ - AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ - AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ - AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ - AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ - AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ - AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ - >; - }; - - main_uart0_pins_default: main-uart0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ - AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ - >; - }; - - main_uart1_pins_default: main-uart1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ - AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */ - AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */ - AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */ - >; - }; - - main_usb1_pins_default: main-usb1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ - >; - }; - - user_leds_pins_default: user-leds-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ - >; - }; -}; - -&cpsw3g { - pinctrl-names = "default"; - pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; -}; - -&cpsw_port2 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy3>; -}; - -&cpsw3g_mdio { - cpsw3g_phy3: ethernet-phy@3 { - compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; - reg = <3>; - ti,rx-internal-delay = ; - ti,fifo-depth = ; - }; -}; - -&main_i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; - status = "okay"; - - gpio_exp: gpio-expander@21 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio_exp_int_pins_default>; - compatible = "nxp,pcf8574"; - reg = <0x21>; - interrupt-parent = <&main_gpio1>; - interrupts = <49 0>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN", - "GPIO2_LED2", "GPIO3_LVDS_GPIO", - "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN", - "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET"; - }; - - eeprom@51 { - compatible = "atmel,24c02"; - pagesize = <16>; - reg = <0x51>; - }; -}; - -&main_mcan0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_mcan0_pins_default>; - phys = <&can_tc1>; - status = "okay"; -}; - -&main_uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; - status = "okay"; -}; - -&main_uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart1_pins_default>; - /* Main UART1 may be used by TIFS firmware */ - status = "okay"; -}; - -&sdhci1 { - vmmc-supply = <&vcc_3v3_mmc>; - vqmmc-supply = <&vddshv5_sdio>; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; - no-1-8-v; - status = "okay"; -}; - -&usbss0 { - ti,vbus-divider; - status = "okay"; -}; - -&usbss1 { - ti,vbus-divider; - status = "okay"; -}; - -&usb0 { - dr_mode = "peripheral"; -}; - -&usb1 { - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&main_usb1_pins_default>; -}; diff --git a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi index ed50bfeb03..dbee4aa8d8 100644 --- a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi +++ b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi @@ -140,7 +140,7 @@ #endif /* CONFIG_TARGET_PHYCORE_AM62X_R5 */ #ifdef CONFIG_TARGET_PHYCORE_AM62X_A53 -#define SPL_AM625_PHYBOARD_LYRA_DTB "spl/dts/k3-am625-phyboard-lyra-rdk.dtb" +#define SPL_AM625_PHYBOARD_LYRA_DTB "spl/dts/ti/k3-am625-phyboard-lyra-rdk.dtb" #define AM625_PHYBOARD_LYRA_DTB "u-boot.dtb" &binman { diff --git a/arch/arm/mach-k3/am62x/Kconfig b/arch/arm/mach-k3/am62x/Kconfig index 9786751874..8b0cdd74f4 100644 --- a/arch/arm/mach-k3/am62x/Kconfig +++ b/arch/arm/mach-k3/am62x/Kconfig @@ -31,6 +31,7 @@ config TARGET_PHYCORE_AM62X_A53 select ARM64 select BINMAN select OF_SYSTEM_SETUP + imply OF_UPSTREAM config TARGET_PHYCORE_AM62X_R5 bool "PHYTEC phyCORE-AM62x running on R5" diff --git a/board/phytec/phycore_am62x/MAINTAINERS b/board/phytec/phycore_am62x/MAINTAINERS index 884e9c6776..02ac88e58a 100644 --- a/board/phytec/phycore_am62x/MAINTAINERS +++ b/board/phytec/phycore_am62x/MAINTAINERS @@ -3,9 +3,7 @@ M: Wadim Egorov W: https://www.phytec.com/product/phycore-am62x S: Maintained F: arch/arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi -F: arch/arm/dts/k3-am62-phycore-som.dtsi F: arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi -F: arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts F: arch/arm/dts/k3-am625-phycore-som-binman.dtsi F: arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts F: board/phytec/phycore_am62x/ diff --git a/configs/phycore_am62x_a53_defconfig b/configs/phycore_am62x_a53_defconfig index 08a2532d39..792e122f3f 100644 --- a/configs/phycore_am62x_a53_defconfig +++ b/configs/phycore_am62x_a53_defconfig @@ -12,7 +12,7 @@ CONFIG_SF_DEFAULT_SPEED=25000000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xFFFFD000 CONFIG_SPL_DM_SPI=y -CONFIG_DEFAULT_DEVICE_TREE="k3-am625-phyboard-lyra-rdk" +CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-phyboard-lyra-rdk" CONFIG_SPL_TEXT_BASE=0x80080000 CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y