From: Joel Stanley <joel@jms.id.au>
Date: Thu, 23 Jun 2022 09:05:28 +0000 (+0930)
Subject: ARM: dts: ast2600: Update SDHCI nodes
X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=dedf8e31861d930927f270b9f5d01013fc54466c;p=u-boot.git

ARM: dts: ast2600: Update SDHCI nodes

Match the description used by the Linux kernel, except use scu instead
of syscon as the phandle.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---

diff --git a/arch/arm/dts/ast2600-evb.dts b/arch/arm/dts/ast2600-evb.dts
index bb438d57cb..a9bba96816 100644
--- a/arch/arm/dts/ast2600-evb.dts
+++ b/arch/arm/dts/ast2600-evb.dts
@@ -15,9 +15,9 @@
 	};
 
 	aliases {
-		mmc0 = &emmc_slot0;
-		mmc1 = &sdhci_slot0;
-		mmc2 = &sdhci_slot1;
+		mmc0 = &emmc;
+		mmc1 = &sdhci0;
+		mmc2 = &sdhci1;
 		spi0 = &fmc;
 		spi1 = &spi1;
 		spi2 = &spi2;
@@ -134,18 +134,16 @@
 	};
 };
 
-&emmc {
-	u-boot,dm-pre-reloc;
-	timing-phase = <0x700ff>;
+
+&emmc_controller {
+        status = "okay";
 };
 
-&emmc_slot0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_emmc_default>;
-	sdhci-drive-type = <1>;
+&emmc {
+        non-removable;
+        bus-width = <4>;
+        max-frequency = <100000000>;
+        clk-phase-mmc-hs200 = <9>, <225>;
 };
 
 &i2c4 {
diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
index a37d062bca..ac8cd4d67d 100644
--- a/arch/arm/dts/ast2600.dtsi
+++ b/arch/arm/dts/ast2600.dtsi
@@ -416,60 +416,51 @@
 				status = "disabled";
 			};
 
-			sdhci: sdhci@1e740000 {
-				#interrupt-cells = <1>;
-				compatible = "aspeed,aspeed-sdhci-irq", "simple-mfd";
-				reg = <0x1e740000 0x1000>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				clocks = <&scu ASPEED_CLK_GATE_SDCLK>,
-					 <&scu ASPEED_CLK_GATE_SDEXTCLK>;
-				clock-names = "ctrlclk", "extclk";
+			sdc: sdc@1e740000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e740000 0x100>;
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0x0 0x1e740000 0x1000>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&scu ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
 
-				sdhci_slot0: sdhci_slot0@100 {
-					compatible = "aspeed,sdhci-ast2600";
+				sdhci0: sdhci@1e740100 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
 					reg = <0x100 0x100>;
-					interrupts = <0>;
-					interrupt-parent = <&sdhci>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
 					clocks = <&scu ASPEED_CLK_SDIO>;
 					status = "disabled";
 				};
 
-				sdhci_slot1: sdhci_slot1@200 {
-					compatible = "aspeed,sdhci-ast2600";
+				sdhci1: sdhci@1e740200 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
 					reg = <0x200 0x100>;
-					interrupts = <1>;
-					interrupt-parent = <&sdhci>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
 					clocks = <&scu ASPEED_CLK_SDIO>;
 					status = "disabled";
 				};
 			};
 
-			emmc: emmc@1e750000 {
-				#interrupt-cells = <1>;
-				compatible = "aspeed,aspeed-emmc-irq", "simple-mfd";
-				reg = <0x1e750000 0x1000>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				clocks = <&scu ASPEED_CLK_GATE_EMMCCLK>,
-					 <&scu ASPEED_CLK_GATE_EMMCEXTCLK>;
-				clock-names = "ctrlclk", "extclk";
+			emmc_controller: sdc@1e750000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e750000 0x100>;
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0x0 0x1e750000 0x1000>;
+				ranges = <0 0x1e750000 0x10000>;
+				clocks = <&scu ASPEED_CLK_GATE_EMMCCLK>;
+				status = "disabled";
 
-				emmc_slot0: emmc_slot0@100 {
-					compatible = "aspeed,emmc-ast2600";
+				emmc: sdhci@1e750100 {
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x100 0x100>;
-					interrupts = <0>;
-					interrupt-parent = <&emmc>;
+					sdhci,auto-cmd12;
+					interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&scu ASPEED_CLK_EMMC>;
-					status = "disabled";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_emmc_default>;
 				};
 			};