From: Jonas Karlman <jonas@kwiboo.se>
Date: Thu, 3 Aug 2023 21:11:54 +0000 (+0000)
Subject: rockchip: rk356x-u-boot: Add bootph-all to i2c0_xfer pinctrl node
X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=dd8d52c934e8858264f91e8e8e2d8c7d8b059dd7;p=u-boot.git

rockchip: rk356x-u-boot: Add bootph-all to i2c0_xfer pinctrl node

A RK8XX PMIC is typically using i2c0 on RK356x devices. Add bootph-all
to required pinctrl nodes to simplify use of the prevent booting on
power plug-in option in SPL.

With the following Kconfig options and nodes in u-boot.dtsi the prevent
booting on power plug-in option can work in SPL.

  CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
  CONFIG_SPL_I2C=y
  CONFIG_SPL_POWER=y
  CONFIG_SPL_PINCTRL=y
  CONFIG_SPL_PMIC_RK8XX=y

  &i2c0 {
  	bootph-pre-ram;
  };

  &rk817 {
  	bootph-pre-ram;

  	regulators {
  		bootph-pre-ram;
  	};
  };

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk356x-u-boot.dtsi b/arch/arm/dts/rk356x-u-boot.dtsi
index 32f687f292..354b6958e5 100644
--- a/arch/arm/dts/rk356x-u-boot.dtsi
+++ b/arch/arm/dts/rk356x-u-boot.dtsi
@@ -64,6 +64,10 @@
 	bootph-all;
 };
 
+&pcfg_pull_none_smt {
+	bootph-all;
+};
+
 &pcfg_pull_none {
 	bootph-all;
 };
@@ -100,6 +104,10 @@
 	bootph-all;
 };
 
+&i2c0_xfer {
+	bootph-all;
+};
+
 &sdmmc0_bus4 {
 	bootph-all;
 };