From: Vignesh R Date: Wed, 6 Jul 2016 04:50:55 +0000 (+0530) Subject: spi: cadence_qspi_apb: Support 32 bit AHB address X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=dac3bf20fb2c9b03476be0d73db620f62ab3cee1;p=u-boot.git spi: cadence_qspi_apb: Support 32 bit AHB address AHB address can be as long as 32 bit, hence remove the CQSPI_REG_INDIRECTRDSTARTADDR mask. Since AHB address is passed from DT and read as u32 value, it anyway does not make sense to mask upper bits. Signed-off-by: Vignesh R Tested-by: Marek Vasut Acked-by: Marek Vasut Reviewed-by: Jagan Teki --- diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index a71531d309..a8cc23f0b6 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -45,7 +45,6 @@ #define CQSPI_INST_TYPE_QUAD (2) #define CQSPI_STIG_DATA_LEN_MAX (8) -#define CQSPI_INDIRECTTRIGGER_ADDR_MASK (0xFFFFF) #define CQSPI_DUMMY_CLKS_PER_BYTE (8) #define CQSPI_DUMMY_BYTES_MAX (4) @@ -573,7 +572,7 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat, addr_bytes = cmdlen - 1; /* Setup the indirect trigger address */ - writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), + writel((u32)plat->ahbbase, plat->regbase + CQSPI_REG_INDIRECTTRIGGER); /* Configure the opcode */ @@ -714,7 +713,7 @@ int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat, return -EINVAL; } /* Setup the indirect trigger address */ - writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), + writel((u32)plat->ahbbase, plat->regbase + CQSPI_REG_INDIRECTTRIGGER); /* Configure the opcode */