From: Jonas Karlman Date: Wed, 1 May 2024 16:22:38 +0000 (+0000) Subject: rockchip: rk3399-pinephone-pro: Sync DT from v6.8 and update defconfig X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=cd55e8ca2238f8833deaccef6ac4a55a8fe009f5;p=u-boot.git rockchip: rk3399-pinephone-pro: Sync DT from v6.8 and update defconfig Sync rk3399-pinephone-pro device tree from Linux kernel v6.8. Add SPI flash related node and options to support boot from SPI flash. Remove REGULATOR_PWM=y, board does not use pwm-regulator compatible. Add SYS_NS16550_MEM32=y to use readl/writel for serial console. Remove SPL_TINY_MEMSET=y to use full memset in SPL. Signed-off-by: Jonas Karlman Reviewed-by: Dragan Simic Reviewed-by: Kever Yang --- diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi index dcfcec4f30..037cec10ce 100644 --- a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi +++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi @@ -13,3 +13,15 @@ &sdmmc { max-frequency = <20000000>; }; + +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + bootph-pre-ram; + bootph-some-ram; + spi-max-frequency = <10000000>; + }; +}; diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts index 04403a7623..61f3fec5a8 100644 --- a/arch/arm/dts/rk3399-pinephone-pro.dts +++ b/arch/arm/dts/rk3399-pinephone-pro.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include #include #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -29,6 +30,31 @@ stdout-path = "serial2:115200n8"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1600000>; + poll-interval = <100>; + + button-up { + label = "Volume Up"; + linux,code = ; + press-threshold-microvolt = <100000>; + }; + + button-down { + label = "Volume Down"; + linux,code = ; + press-threshold-microvolt = <600000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000 0>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -102,6 +128,37 @@ /* WL_REG_ON on module */ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + + /* MIPI DSI panel 1.8v supply */ + vcc1v8_lcd: vcc1v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc1v8_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + }; + + /* MIPI DSI panel 2.8v supply */ + vcc2v8_lcd: vcc2v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc2v8_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + }; +}; + +&cpu_alert0 { + temperature = <65000>; +}; +&cpu_alert1 { + temperature = <68000>; }; &cpu_l0 { @@ -132,6 +189,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -326,6 +388,25 @@ }; }; +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt1158"; + reg = <0x14>; + interrupt-parent = <&gpio3>; + interrupts = ; + irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + &cluster0_opp { opp04 { status = "disabled"; @@ -355,6 +436,39 @@ status = "okay"; }; +&mipi_dsi { + status = "okay"; + clock-master; + + ports { + mipi_out: port@1 { + #address-cells = <0>; + #size-cells = <0>; + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel@0 { + compatible = "hannstar,hsd060bhw4"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc2v8_lcd>; + iovcc-supply = <&vcc1v8_lcd>; + pinctrl-names = "default"; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_1v8>; status = "okay"; @@ -422,6 +536,15 @@ status = "okay"; }; +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-sd-highspeed; @@ -472,3 +595,27 @@ &uart2 { status = "okay"; }; + +&vopb { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>, + <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>, + <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig index c36898364b..1bb7b35a25 100644 --- a/configs/pinephone-pro-rk3399_defconfig +++ b/configs/pinephone-pro-rk3399_defconfig @@ -3,7 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_ENV_SIZE=0x8000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro" @@ -33,7 +33,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -54,18 +53,20 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_SILICONKAISER=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_TYPEC=y CONFIG_DM_PMIC_FAN53555=y CONFIG_PMIC_RK8XX=y -CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM_ROCKCHIP_LPDDR4=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y CONFIG_ROCKCHIP_SPI=y CONFIG_SYSRESET=y CONFIG_USB=y @@ -85,5 +86,4 @@ CONFIG_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y CONFIG_DISPLAY_ROCKCHIP_EDP=y -CONFIG_SPL_TINY_MEMSET=y CONFIG_ERRNO_STR=y