From: Christian Hewitt Date: Mon, 20 Mar 2023 11:46:09 +0000 (+0000) Subject: doc: boards: amlogic: add documentation for ODROID-HC4 X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=8d5d623a9dd6a36d7c1a7b40e581a4797ab7027a;p=u-boot.git doc: boards: amlogic: add documentation for ODROID-HC4 Add separate documentation for the ODROID-HC4 board to ensure users build U-Boot using the HC4 defconfig that enables PCIe SATA boot. This avoids user frustration trying to boot after using the C4 recipe which only works from SD card. Signed-off-by: Christian Hewitt Link: https://lore.kernel.org/r/20230320114609.930145-34-christianshewitt@gmail.com [narmstrong: fixed doc build] Signed-off-by: Neil Armstrong --- diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst index 7c4c161e0d..9b76bca427 100644 --- a/doc/board/amlogic/index.rst +++ b/doc/board/amlogic/index.rst @@ -101,6 +101,7 @@ Board Documentation nanopi-k2 odroid-c2 odroid-c4 + odroid-hc4 odroid-n2 odroid-n2l odroid-go-ultra diff --git a/doc/board/amlogic/odroid-hc4.rst b/doc/board/amlogic/odroid-hc4.rst new file mode 100644 index 0000000000..1d37be2d80 --- /dev/null +++ b/doc/board/amlogic/odroid-hc4.rst @@ -0,0 +1,142 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for ODROID-HC4 (S905X3) +============================== + +ODROID-HC4 is a variant of the ODROID-C4 single board computer manufactured by Hardkernel +with the following specification: + + - Amlogic S905X3 Arm Cortex-A55 quad-core SoC + - 4GB DDR4 SDRAM + - 16MB XT25F128B SPI-NOR flash + - Gigabit Ethernet + - HDMI 2.1 display + - 7-pin GPIO header for OLED display and RTC + - 1x USB 2.0 host (micro) + - 2x SATA ports via ASM1061 PCIe to SATA controller + - microSD + - UART serial + - Infrared receiver + +Schematics are available on the manufacturer website. + +U-Boot Compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make odroid-hc4_defconfig + $ make + +U-Boot Signing with Pre-Built FIP repo +-------------------------------------- + +.. code-block:: bash + + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1 + $ cd amlogic-boot-fip + $ mkdir my-output-dir + $ ./build-fip.sh odroid-hc4 /path/to/u-boot/u-boot.bin my-output-dir + +U-Boot Manual Signing +--------------------- + +Amlogic does not provide sources for the firmware and tools needed to create a bootloader +image so it is necessary to obtain binaries from sources published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + + $ DIR=odroid-hc4 + $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b odroidg12-v2015.01 $DIR + + $ cd odroid-hc4 + $ make odroidc4_defconfig + $ make + $ export UBOOTDIR=$PWD + +Go back to mainline U-Boot source tree then: + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/hardkernel/odroidc4/firmware/acs.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl31.img fip/ + $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/piei.fw fip/ + $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --ddrfw9 fip/lpddr3_1d.fw \ + --level v3 + +Then write U-Boot to SD or SPI-NOR with: + +.. code-block:: bash + + $ DEV=/dev/boot_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440