From: Patrick Delaunay Date: Fri, 6 Nov 2020 18:01:52 +0000 (+0100) Subject: spi: stm32_spi: migrate trace to dev and log macro X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=7a41cb50ce0539e2801ee71084aedc20971d7257;p=u-boot.git spi: stm32_spi: migrate trace to dev and log macro Change debug/pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/drivers/spi/stm32_spi.c b/drivers/spi/stm32_spi.c index 720103d517..bd8514033d 100644 --- a/drivers/spi/stm32_spi.c +++ b/drivers/spi/stm32_spi.c @@ -4,6 +4,9 @@ * * Driver for STMicroelectronics Serial peripheral interface (SPI) */ + +#define LOG_CATEGORY UCLASS_SPI + #include #include #include @@ -138,7 +141,7 @@ static void stm32_spi_write_txfifo(struct stm32_spi_priv *priv) } } - debug("%s: %d bytes left\n", __func__, priv->tx_len); + log_debug("%d bytes left\n", priv->tx_len); } static void stm32_spi_read_rxfifo(struct stm32_spi_priv *priv) @@ -176,12 +179,12 @@ static void stm32_spi_read_rxfifo(struct stm32_spi_priv *priv) rxplvl = (sr & SPI_SR_RXPLVL) >> SPI_SR_RXPLVL_SHIFT; } - debug("%s: %d bytes left\n", __func__, priv->rx_len); + log_debug("%d bytes left\n", priv->rx_len); } static int stm32_spi_enable(struct stm32_spi_priv *priv) { - debug("%s\n", __func__); + log_debug("\n"); /* Enable the SPI hardware */ setbits_le32(priv->base + STM32_SPI_CR1, SPI_CR1_SPE); @@ -191,7 +194,7 @@ static int stm32_spi_enable(struct stm32_spi_priv *priv) static int stm32_spi_disable(struct stm32_spi_priv *priv) { - debug("%s\n", __func__); + log_debug("\n"); /* Disable the SPI hardware */ clrbits_le32(priv->base + STM32_SPI_CR1, SPI_CR1_SPE); @@ -204,7 +207,7 @@ static int stm32_spi_claim_bus(struct udevice *slave) struct udevice *bus = dev_get_parent(slave); struct stm32_spi_priv *priv = dev_get_priv(bus); - debug("%s\n", __func__); + dev_dbg(slave, "\n"); /* Enable the SPI hardware */ return stm32_spi_enable(priv); @@ -215,7 +218,7 @@ static int stm32_spi_release_bus(struct udevice *slave) struct udevice *bus = dev_get_parent(slave); struct stm32_spi_priv *priv = dev_get_priv(bus); - debug("%s\n", __func__); + dev_dbg(slave, "\n"); /* Disable the SPI hardware */ return stm32_spi_disable(priv); @@ -227,7 +230,7 @@ static void stm32_spi_stopxfer(struct udevice *dev) u32 cr1, sr; int ret; - debug("%s\n", __func__); + dev_dbg(dev, "\n"); cr1 = readl(priv->base + STM32_SPI_CR1); @@ -255,7 +258,7 @@ static int stm32_spi_set_cs(struct udevice *dev, unsigned int cs, bool enable) { struct stm32_spi_priv *priv = dev_get_priv(dev); - debug("%s: cs=%d enable=%d\n", __func__, cs, enable); + dev_dbg(dev, "cs=%d enable=%d\n", cs, enable); if (cs >= MAX_CS_COUNT) return -ENODEV; @@ -274,7 +277,7 @@ static int stm32_spi_set_mode(struct udevice *bus, uint mode) struct stm32_spi_priv *priv = dev_get_priv(bus); u32 cfg2_clrb = 0, cfg2_setb = 0; - debug("%s: mode=%d\n", __func__, mode); + dev_dbg(bus, "mode=%d\n", mode); if (mode & SPI_CPOL) cfg2_setb |= SPI_CFG2_CPOL; @@ -330,7 +333,7 @@ static int stm32_spi_set_speed(struct udevice *bus, uint hz) u32 mbrdiv; long div; - debug("%s: hz=%d\n", __func__, hz); + dev_dbg(bus, "hz=%d\n", hz); if (priv->cur_hz == hz) return 0; @@ -404,8 +407,8 @@ static int stm32_spi_xfer(struct udevice *slave, unsigned int bitlen, stm32_spi_enable(priv); } - debug("%s: priv->tx_len=%d priv->rx_len=%d\n", __func__, - priv->tx_len, priv->rx_len); + dev_dbg(bus, "priv->tx_len=%d priv->rx_len=%d\n", + priv->tx_len, priv->rx_len); slave_plat = dev_get_parent_plat(slave); if (flags & SPI_XFER_BEGIN) @@ -477,7 +480,7 @@ static int stm32_spi_get_fifo_size(struct udevice *dev) stm32_spi_disable(priv); - debug("%s %d x 8-bit fifo size\n", __func__, count); + dev_dbg(dev, "%d x 8-bit fifo size\n", count); return count; } @@ -522,7 +525,7 @@ static int stm32_spi_probe(struct udevice *dev) ret = gpio_request_list_by_name(dev, "cs-gpios", priv->cs_gpios, ARRAY_SIZE(priv->cs_gpios), 0); if (ret < 0) { - pr_err("Can't get %s cs gpios: %d", dev->name, ret); + dev_err(dev, "Can't get cs gpios: %d", ret); goto reset_err; }