From: Simon Glass <sjg@chromium.org>
Date: Thu, 21 Jan 2021 20:57:07 +0000 (-0700)
Subject: x86: coral: Support TPM and RTC in SPL
X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=442e6305b5b02d689774a0bf73311643ffa0df6f;p=u-boot.git

x86: coral: Support TPM and RTC in SPL

Update the devicetree so that the TPM and RTC can be used in SPL. Also
enable the pins used for getting the memory configuration settings while
we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts
index 965f59276a..9319123c0c 100644
--- a/arch/x86/dts/chromebook_coral.dts
+++ b/arch/x86/dts/chromebook_coral.dts
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/x86-gpio.h>
 
 /include/ "skeleton.dtsi"
@@ -99,6 +100,7 @@
 	clk: clock {
 		compatible = "intel,apl-clk";
 		#clock-cells = <1>;
+		u-boot,dm-pre-reloc;
 	};
 
 	cpus {
@@ -139,6 +141,7 @@
 	};
 
 	acpi_gpe: general-purpose-events {
+		u-boot,dm-pre-reloc;
 		reg = <IOMAP_ACPI_BASE IOMAP_ACPI_SIZE>;
 		compatible = "intel,acpi-gpe";
 		interrupt-controller;
@@ -417,8 +420,10 @@
 		};
 
 		i2c_2: i2c2@16,2 {
-			compatible = "intel,apl-i2c";
+			compatible = "intel,apl-i2c", "snps,designware-i2c-pci";
 			reg = <0x0200b210 0 0 0 0>;
+			early-regs = <IOMAP_I2C2_BASE 0x1000>;
+			u-boot,dm-pre-reloc;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clock-frequency = <400000>;
@@ -429,6 +434,7 @@
 			tpm: tpm@50 {
 				reg = <0x50>;
 				compatible = "google,cr50";
+				u-boot,dm-pre-reloc;
 				u-boot,i2c-offset-len = <0>;
 				ready-gpios = <&gpio_n 28 GPIO_ACTIVE_LOW>;
 				interrupts-extended = <&acpi_gpe GPIO_28_IRQ
@@ -583,6 +589,7 @@
 				u-boot,dm-pre-reloc;
 				cros_ec: cros-ec {
 					u-boot,dm-pre-proper;
+					u-boot,dm-vpl;
 					compatible = "google,cros-ec-lpc";
 					reg = <0x204 1 0x200 1 0x880 0x80>;
 
@@ -658,6 +665,11 @@
 		PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1)	 /* LPC_AD3 */
 		PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */
 		PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */
+
+		PAD_CFG_GPI(GPIO_101, NONE, DEEP) /* FST_IO2 -- MEM_CONFIG0 */
+		PAD_CFG_GPI(GPIO_102, NONE, DEEP) /* FST_IO3 -- MEM_CONFIG1 */
+		PAD_CFG_GPI(GPIO_38, NONE, DEEP) /* LPSS_UART0_RXD - MEM_CONFIG2*/
+		PAD_CFG_GPI(GPIO_45, NONE, DEEP) /* LPSS_UART1_CTS - MEM_CONFIG3 */
 		>;
 };
 
@@ -1211,3 +1223,9 @@
 		PAD_CFG_GPI(GPIO_73, UP_20K, DEEP)	 /* GP_CAMERASB11 */
 	>;
 };
+
+&rtc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/x86/include/asm/arch-apollolake/iomap.h b/arch/x86/include/asm/arch-apollolake/iomap.h
index 21c5f33021..a4ea150707 100644
--- a/arch/x86/include/asm/arch-apollolake/iomap.h
+++ b/arch/x86/include/asm/arch-apollolake/iomap.h
@@ -33,6 +33,9 @@
 #define SRAM_SIZE_2		(4 * KiB)
 #endif
 
+/* Early address for I2C port 2 */
+#define IOMAP_I2C2_BASE		(0xfe020000 + 2 * 0x1000)
+
 /*
  * Use UART2. To use UART1 you need to set '2' to '1', change device tree serial
  * node name and 'reg' property, and update CONFIG_DEBUG_UART_BASE.